summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorRyan Harkin <ryan.harkin@linaro.org>2015-11-18 10:39:09 +0000
committerTom Rini <trini@konsulko.com>2015-11-21 21:50:29 -0500
commitf3c71c93d71dbc8994648b7f7b98210df2d0a0a6 (patch)
tree2148d5f1fcc684f62822cd1e8811d034db5bff89 /include
parent3e933f43e993791d9bad304189ff2178ca04a1c8 (diff)
vexpress64: store env in flash
Add support for storing the environment in CFI NOR flash on Juno and FVP models. I also removed some config values that are not used by CFI flash parts. Juno has 1 flash part with 259 sectors. The first 255 sectors are 0x40000 (256kb) and are followed by 4 sectors of 0x10000 (64KB). FVP models simulate a 64MB NOR flash part at base address 0x0FFC0000. This part has 256 x 256kb sectors. We use the last sector to store the environment. To save the NOR flash to a file, the following parameters should be passed to the model: -C bp.flashloader1.fname=${FILENAME} -C bp.flashloader1.fnameWrite=${FILENAME} Foundation models don't simulate the NOR flash, but having NOR support in the u-boot binary does not harm: attempting to write to the NOR will fail gracefully. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include')
-rw-r--r--include/configs/vexpress_aemv8a.h37
1 files changed, 20 insertions, 17 deletions
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 6734d7e1fa..c767f90e88 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -276,10 +276,6 @@
#endif
-/* Do not preserve environment */
-#define CONFIG_ENV_IS_NOWHERE 1
-#define CONFIG_ENV_SIZE 0x1000
-
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
@@ -290,28 +286,35 @@
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS 64 /* max command args */
-/* Flash memory is available on the Juno board only */
-#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT 259
+/* Store environment at top of flash in the same location as blank.img */
+/* in the Juno firmware. */
+#define CONFIG_ENV_ADDR 0x0BFC0000
+#define CONFIG_ENV_SECT_SIZE 0x00010000
#else
+#define CONFIG_SYS_FLASH_BASE 0x0C000000
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+/* Store environment at top of flash */
+#define CONFIG_ENV_ADDR 0x0FFC0000
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#endif
+
#define CONFIG_CMD_ARMFLASH
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_FLASH_BASE 0x08000000
-#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MiB */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* Timeout values in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define FLASH_MAX_SECTOR_SIZE 0x00040000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_IS_IN_FLASH 1
-#endif
#endif /* __VEXPRESS_AEMV8A_H */