Refactor linker-generated arrays

Refactor linker-generated array code so that symbols
which were previously linker-generated are now compiler-
generated. This causes relocation records of type
R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
code which uses LGA able to run before relocation as
well as after.

Note: this affects more than ARM targets, as linker-
lists span possibly all target architectures, notably
PowerPC.

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
	arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
	arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
	board/ait/cam_enc_4xx/u-boot-spl.lds
	board/davinci/da8xxevm/u-boot-spl-da850evm.lds
	board/davinci/da8xxevm/u-boot-spl-hawk.lds
	board/vpac270/u-boot-spl.lds

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

11 files changed, 11 insertions, 51 deletions

diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile
index 9c778261b6..3a2a2d4b17 100644
--- a/nand_spl/board/freescale/mpc8536ds/Makefile
+++ b/nand_spl/board/freescale/mpc8536ds/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile
index 9c778261b6..3a2a2d4b17 100644
--- a/nand_spl/board/freescale/mpc8569mds/Makefile
+++ b/nand_spl/board/freescale/mpc8569mds/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile
index 9c778261b6..3a2a2d4b17 100644
--- a/nand_spl/board/freescale/mpc8572ds/Makefile
+++ b/nand_spl/board/freescale/mpc8572ds/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
index fd0dfc19d8..3d57059f50 100644
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ b/nand_spl/board/freescale/mx31pdk/Makefile
@@ -6,7 +6,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
 	   $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -38,11 +37,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $@
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds
index a26110f393..0656176930 100644
--- a/nand_spl/board/freescale/mx31pdk/u-boot.lds
+++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	.u_boot_list : {
-		#include <u-boot.lst>
+		*(SORT(.u_boot_list*));
 	}
 
 	. = ALIGN(4);
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
index c3495ec0df..f7bdf9207d 100644
--- a/nand_spl/board/freescale/p1010rdb/Makefile
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
 	   $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \
 		 -ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile
index 9b2c0d7f35..fb7d5612a1 100644
--- a/nand_spl/board/freescale/p1023rds/Makefile
+++ b/nand_spl/board/freescale/p1023rds/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -57,11 +56,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile
index 9c778261b6..3a2a2d4b17 100644
--- a/nand_spl/board/freescale/p1_p2_rdb/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile
index 82489d2405..9f9c5893cf 100644
--- a/nand_spl/board/karo/tx25/Makefile
+++ b/nand_spl/board/karo/tx25/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
 	   $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -59,11 +58,7 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
 		-Map $(nandobj)u-boot-spl.map \
 		-o $@
 
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot.lds: $(LDSCRIPT)
 	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
 		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds
index ee361314fd..ea84d64f3f 100644
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ b/nand_spl/board/karo/tx25/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	.u_boot_list : {
-	#include <u-boot.lst>
+	*(SORT(.u_boot_list*));
 	}
 
 	. = ALIGN(4);
diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds
index 2ed646630c..66b412e4aa 100644
--- a/nand_spl/board/samsung/smdk6400/u-boot.lds
+++ b/nand_spl/board/samsung/smdk6400/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	.u_boot_list : {
-	#include <u-boot.lst>
+	*(SORT(.u_boot_list*));
 	}
 
 	. = ALIGN(4);