diff options
author | Siarhei Siamashka <siarhei.siamashka@gmail.com> | 2014-12-25 02:34:47 +0200 |
---|---|---|
committer | Hans de Goede <hdegoede@redhat.com> | 2015-01-14 14:56:37 +0100 |
commit | f0ce28e9eda9cb1430c51df1840ce8cd483f75c3 (patch) | |
tree | c67c32e6fdba758f5812ebf35f0114fb6cc1d1c8 /scripts | |
parent | 1d7cd7bf7d942b2b2880187ea97108a2cc564361 (diff) |
sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig
The CONFIG_UART0_PORT_F option has been supported since
http://git.denx.de/?p=u-boot.git;a=commit;h=ff2b47f6a9cc1025
This option is primarily useful only for low level u-boot debugging
on tablets, where normal UART0 is difficult to access and requires
device disassembly and/or soldering.
This patch now allows it to be selected from menuconfig. A dependency on
SPL_FEL is added because u-boot does not support booting from NAND yet
and also booting from SD card is impossible when a MicroSD breakout board
is plugged into the SD slot.
Additionally a compilation problem is fixed:
common/spl/built-in.o: In function `spl_mmc_load_image':
/tmp/u-boot-sunxi/common/spl/spl_mmc.c:94: undefined reference to `mmc_initialize'
/tmp/u-boot-sunxi/common/spl/spl_mmc.c:96: undefined reference to `find_mmc_device'
/tmp/u-boot-sunxi/common/spl/spl_mmc.c:104: undefined reference to `mmc_init'
scripts/Makefile.spl:206: recipe for target 'spl/u-boot-spl' failed
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'scripts')
-rwxr-xr-x | scripts/multiconfig.sh | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh index 70f3a5df6f..366e8faaa6 100755 --- a/scripts/multiconfig.sh +++ b/scripts/multiconfig.sh @@ -168,7 +168,7 @@ do_board_felconfig () { echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2 exit 1 fi - sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y/g' \ + sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y\nCONFIG_UART0_PORT_F=n/g' \ .config spl/.config } |