tools: move kermit files to tools/kermit directory

The script files, define2mk.sed and make-asm-offsets
are used to create autoconf.mk and asm-offsets.h
while build.

Whereas README, dot.kermrc, flash_param, send_cmd, send_image
are files useful for kermit.

We should not put files which have the totally different purpose
into the same directory.

This commit creates a new directory, tools/kermit,
and move kermit files into it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

5 files changed, 0 insertions, 174 deletions

diff --git a/tools/scripts/README b/tools/scripts/README
deleted file mode 100644
index c3b491aa55..0000000000
--- a/tools/scripts/README
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-This directory contains scripts that help to perform certain actions
-that need to be done frequently when working with U-Boot.
-
-They are meant as EXAMPLE code, so it is very likely that you will
-have to modify them before use.
-
-
-Short description:
-==================
-
-dot.kermrc:
-
-	Example for "~/.kermrc" Kermit init file for use with U-Boot
-
-	by Wolfgang Denk, 24 Jun 2001
-
-flash_param:
-
-	"kermit" script to automatically initialize the environment
-	variables on your target. This is most useful during
-	development when your environment variables are stored in an
-	embedded flash sector which is erased whenever you install a
-	new U-Boot image.
-
-	by Swen Anderson, 10 May 2001
-
-send_cmd:
-
-	send_cmd U_BOOT_COMMAND
-
-	"kermit" script to send a U-Boot command and print the
-	results. When used from a shell with history (like the bash)
-	this indirectly adds kind of history to U-Boot ;-)
-
-	by Swen Anderson, 10 May 2001
-
-send_image:
-
-	send_image FILE_NAME OFFSET
-
-	"kermit" script to automatically download a file to the
-	target using the "loadb" command (kermit binary protocol)
-
-	by Swen Anderson, 10 May 2001
diff --git a/tools/scripts/dot.kermrc b/tools/scripts/dot.kermrc
deleted file mode 100644
index 0fc6c15d35..0000000000
--- a/tools/scripts/dot.kermrc
+++ /dev/null
@@ -1,16 +0,0 @@
-set line /dev/ttyS0
-set speed 115200
-set carrier-watch off
-set handshake none
-set flow-control none
-robust
-set file type bin
-set file name lit
-set rec pack 1000
-set send pack 1000
-set window 5
-set prompt Kermit>
-define sz !sz \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
-define rz !rz \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
-define sx !sx \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
-define rx !rx \%1 \%2 \%3 \%4 \%5 \%6 \%7 \%8 \%9 < \v(line) > \v(line)
diff --git a/tools/scripts/flash_param b/tools/scripts/flash_param
deleted file mode 100644
index 847f99e1eb..0000000000
--- a/tools/scripts/flash_param
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/usr/bin/kermit +
-# usage: ./flash_param parameters
-# Parameters: IP Address       ETH Address        ERIC Number
-# Format:     xxx.xxx.xxx.xxx  xx:xx:xx:xx:xx:xx  xxxx
-
-set line /dev/ttyS0
-set speed 115200
-set serial 8N1
-set carrier-watch off
-set handshake none
-#set flow-control none
-set flow-control xon/xoff
-#robust
-set file type bin
-set file name lit
-set rec pack 1000
-set send pack 1000
-set window 5
-set prompt Kermit>
-#robust
-# Milliseconds to pause between each OUTPUT character
-set output pacing 1
-
-out \13
-in 10 =>
-#first erase the environment memory within NVRAM
-out mw f0000000 0 200\13
-in 10 =>
-out reset\13
-in 5 autoboot
-out \13\13
-in 10 =>
-#set additional env parameter
-out setenv ethaddr \%2\13
-in 10 =>
-out setenv serial# ERIC 1.0 \%3\13
-in 10 =>
-out setenv eric_id \%3\13
-in 10 =>
-#out setenv prec_videocard_bus unknown\13
-#in 10 =>
-#out setenv prec_bios_type unknown\13
-#in 10 =>
-out setenv eric_passwd .eRIC.\13
-in 10 =>
-#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.1.100:192.168.1.254:255.255.255.0\13
-#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1:192.168.0.1\13
-#out setenv bootargs root=/dev/ram ramdisk_size=8192 init=/sbin/init ip=\%1\13
-out setenv bootargs console=/dev/ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.26:/eric_root_devel ip=\%1:192.168.1.26\13
-in 10 =>
-out setenv bootcmd bootm FFC00000\13
-in 10 =>
-out saveenv\13
-in 10 =>
-out reset\13
-in 5 autoboot
-out \13\13
-in 10 =>
-quit
-exit 0
diff --git a/tools/scripts/send_cmd b/tools/scripts/send_cmd
deleted file mode 100644
index 4131331f03..0000000000
--- a/tools/scripts/send_cmd
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/kermit +
-set line /dev/ttyS0
-set speed 115200
-set serial 8N1
-set carrier-watch off
-set handshake none
-set flow-control none
-robust
-set file type bin
-set file name lit
-set rec pack 1000
-set send pack 1000
-set window 5
-set prompt Kermit>
-
-#out \13
-#in 10 =>
-out \%1 \%2 \%3 \%4 \%5 \%6 \%7\13
-in 10 =>
-quit
-exit 0
diff --git a/tools/scripts/send_image b/tools/scripts/send_image
deleted file mode 100644
index 9b89d6b059..0000000000
--- a/tools/scripts/send_image
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/usr/bin/kermit +
-# usage: send_image FILE_NAME OFFSET
-# e.g.   send_image output.bin 1F00000
-set line /dev/ttyS0
-set speed 115200
-set serial 8N1
-set carrier-watch off
-set handshake none
-set flow-control none
-robust
-set file type bin
-set file name lit
-set rec pack 1000
-set send pack 1000
-set window 5
-set prompt Kermit>
-
-out \13
-in 10 =>
-out loadb \%2 \13
-in 10 download ...
-send \%1
-out \13
-in 10 ## Start Addr
-quit
-exit 0