diff options
74 files changed, 5 insertions, 345 deletions
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index e8ba1ae09e..1edb1a439a 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -12,12 +12,6 @@ #include <common.h> -#ifdef CONFIG_USE_IRQ -void do_irq (struct pt_regs *pt_regs) -{ -} -#endif - #if defined(CONFIG_TEGRA) static ulong timestamp; static ulong lastdec; diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile index 7aa432a6fc..8faf34b87e 100644 --- a/arch/arm/cpu/arm920t/Makefile +++ b/arch/arm/cpu/arm920t/Makefile @@ -8,7 +8,6 @@ extra-y = start.o obj-y += cpu.o -obj-$(CONFIG_USE_IRQ) += interrupts.o obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ diff --git a/arch/arm/cpu/arm920t/s3c24x0/Makefile b/arch/arm/cpu/arm920t/s3c24x0/Makefile index e44c549ba0..e78f8a017c 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/Makefile +++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile @@ -5,7 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_USE_IRQ) += interrupts.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-y += speed.o obj-y += timer.o diff --git a/arch/arm/cpu/sa1100/cpu.c b/arch/arm/cpu/sa1100/cpu.c index 4c9752a1c8..59585af83a 100644 --- a/arch/arm/cpu/sa1100/cpu.c +++ b/arch/arm/cpu/sa1100/cpu.c @@ -19,10 +19,6 @@ #include <asm/system.h> #include <asm/io.h> -#ifdef CONFIG_USE_IRQ -DECLARE_GLOBAL_DATA_PTR; -#endif - static void cache_flush(void); int cleanup_before_linux (void) diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index ed83043abb..066c172bb3 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -26,75 +26,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_USE_IRQ -int interrupt_init (void) -{ - unsigned long cpsr; - - /* - * setup up stacks if necessary - */ - IRQ_STACK_START = gd->irq_sp - 4; - IRQ_STACK_START_IN = gd->irq_sp + 8; - FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; - - - __asm__ __volatile__("mrs %0, cpsr\n" - : "=r" (cpsr) - : - : "memory"); - - __asm__ __volatile__("msr cpsr_c, %0\n" - "mov sp, %1\n" - : - : "r" (IRQ_MODE | I_BIT | F_BIT | (cpsr & ~FIQ_MODE)), - "r" (IRQ_STACK_START) - : "memory"); - - __asm__ __volatile__("msr cpsr_c, %0\n" - "mov sp, %1\n" - : - : "r" (FIQ_MODE | I_BIT | F_BIT | (cpsr & ~IRQ_MODE)), - "r" (FIQ_STACK_START) - : "memory"); - - __asm__ __volatile__("msr cpsr_c, %0" - : - : "r" (cpsr) - : "memory"); - - return arch_interrupt_init(); -} - -/* enable IRQ interrupts */ -void enable_interrupts (void) -{ - unsigned long temp; - __asm__ __volatile__("mrs %0, cpsr\n" - "bic %0, %0, #0x80\n" - "msr cpsr_c, %0" - : "=r" (temp) - : - : "memory"); -} - - -/* - * disable IRQ/FIQ interrupts - * returns true if interrupts had been enabled before we disabled them - */ -int disable_interrupts (void) -{ - unsigned long old,temp; - __asm__ __volatile__("mrs %0, cpsr\n" - "orr %1, %0, #0xc0\n" - "msr cpsr_c, %1" - : "=r" (old), "=r" (temp) - : - : "memory"); - return (old & 0x80) == 0; -} -#else int interrupt_init (void) { /* @@ -113,8 +44,6 @@ int disable_interrupts (void) { return 0; } -#endif - void bad_mode (void) { @@ -212,7 +141,6 @@ void do_fiq (struct pt_regs *pt_regs) bad_mode (); } -#ifndef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { efi_restore_gd(); @@ -220,4 +148,3 @@ void do_irq (struct pt_regs *pt_regs) show_regs (pt_regs); bad_mode (); } -#endif diff --git a/arch/arm/lib/stack.c b/arch/arm/lib/stack.c index 4614d2657c..737622d26f 100644 --- a/arch/arm/lib/stack.c +++ b/arch/arm/lib/stack.c @@ -25,14 +25,6 @@ int arch_reserve_stacks(void) gd->irq_sp = gd->start_addr_sp; # if !defined(CONFIG_ARM64) -# ifdef CONFIG_USE_IRQ - gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ); - debug("Reserving %zu Bytes for IRQ stack at: %08lx\n", - CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp); - - /* 8-byte alignment for ARM ABI compliance */ - gd->start_addr_sp &= ~0x07; -# endif /* leave 3 words for abort-stack, plus 1 for alignment */ gd->start_addr_sp -= 16; # endif diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index 9fe7415b66..f53b1e9a2b 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -128,19 +128,6 @@ fiq: IRQ_STACK_START_IN: .word 0x0badc0de -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de - -#endif /* CONFIG_USE_IRQ */ - @ @ IRQ stack frame. @ @@ -264,24 +251,6 @@ not_used: bad_save_user_regs bl do_not_used -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else .align 5 irq: @@ -295,6 +264,4 @@ fiq: bad_save_user_regs bl do_fiq -#endif /* CONFIG_USE_IRQ */ - #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c index e1064e0a2f..ec331ba6bb 100644 --- a/arch/arm/mach-davinci/misc.c +++ b/arch/arm/mach-davinci/misc.c @@ -107,7 +107,6 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) #endif /* CONFIG_DRIVER_TI_EMAC */ #if defined(CONFIG_SOC_DA8XX) -#ifndef CONFIG_USE_IRQ void irq_init(void) { /* @@ -122,7 +121,6 @@ void irq_init(void) writel(0xffffffff, &davinci_aintc_regs->ecr2); writel(0xffffffff, &davinci_aintc_regs->ecr3); } -#endif /* * Enable PSC for various peripherals. diff --git a/arch/arm/mach-keystone/cmd_ddr3.c b/arch/arm/mach-keystone/cmd_ddr3.c index ea78ad8fd5..d3eab0711c 100644 --- a/arch/arm/mach-keystone/cmd_ddr3.c +++ b/arch/arm/mach-keystone/cmd_ddr3.c @@ -15,12 +15,13 @@ DECLARE_GLOBAL_DATA_PTR; #define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE +#define STACKSIZE (512 << 10) /* 512 KiB */ #define DDR_REMAP_ADDR 0x80000000 #define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17) #define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \ - CONFIG_STACKSIZE) >> 17) - 2) + STACKSIZE) >> 17) - 2) #define DDR_TEST_BURST_SIZE 1024 diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c index d6991f6668..22eab03b12 100644 --- a/arch/avr32/cpu/exception.c +++ b/arch/avr32/cpu/exception.c @@ -10,6 +10,8 @@ DECLARE_GLOBAL_DATA_PTR; +#define STACKSIZE 2048 + static const char * const cpu_modes[8] = { "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1", "Interrupt level 2", "Interrupt level 3", "Exception", "NMI" @@ -96,7 +98,7 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs) printf("CPU Mode: %s\n", cpu_modes[mode]); /* Avoid exception loops */ - if (regs->sp < (gd->start_addr_sp - CONFIG_STACKSIZE) || + if (regs->sp < (gd->start_addr_sp - STACKSIZE) || regs->sp >= gd->start_addr_sp) printf("\nStack pointer seems bogus, won't do stack dump\n"); else diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S index 7b2b637af3..99971fdbdb 100644 --- a/arch/nds32/cpu/n1213/start.S +++ b/arch/nds32/cpu/n1213/start.S @@ -90,24 +90,6 @@ _start: j reset _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c index 9747f32904..fd1965d9f5 100644 --- a/board/Barix/ipam390/ipam390.c +++ b/board/Barix/ipam390/ipam390.c @@ -188,9 +188,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* arch number of the board */ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM; diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 37d2f54d3b..9e17eb865d 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -323,9 +323,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif #ifdef CONFIG_NAND_DAVINCI /* diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index 3ce1992c1d..d941285977 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -171,9 +171,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* arch number of the board */ gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_LCDK; diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index 66804d75bd..6edfa17a91 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -203,9 +203,7 @@ int board_early_init_f(void) /* Set LCD_B_PWR low to power down LCD Backlight*/ gpio_direction_output(102, 0); -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* * NAND CS setup - cycle counts based on da850evm NAND timings in the diff --git a/board/lego/ev3/legoev3.c b/board/lego/ev3/legoev3.c index 7e1766c871..0ad33eaeae 100644 --- a/board/lego/ev3/legoev3.c +++ b/board/lego/ev3/legoev3.c @@ -145,9 +145,7 @@ int board_early_init_f(void) int board_init(void) { -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* arch number of the board */ /* LEGO didn't register for a unique number and uses da850evm */ diff --git a/board/omicron/calimain/calimain.c b/board/omicron/calimain/calimain.c index 32f2b20183..80a142eaf8 100644 --- a/board/omicron/calimain/calimain.c +++ b/board/omicron/calimain/calimain.c @@ -100,9 +100,7 @@ int board_init(void) { int val; -#ifndef CONFIG_USE_IRQ irq_init(); -#endif /* address of boot parameters */ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; diff --git a/common/board_f.c b/common/board_f.c index 224fbed92f..ff07886665 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -137,11 +137,6 @@ static int display_text_info(void) text_base, bss_start, bss_end); #endif -#ifdef CONFIG_USE_IRQ - debug("IRQ Stack: %08lx\n", IRQ_STACK_START); - debug("FIQ Stack: %08lx\n", FIQ_STACK_START); -#endif - return 0; } diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 2fe323a85a..588a84d7a9 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -489,10 +489,6 @@ static void enc_poll(enc_dev_t *enc) u8 eir_reg; u8 pkt_cnt; -#ifdef CONFIG_USE_IRQ - /* clear global interrupt enable bit in enc28j60 */ - enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE); -#endif (void)enc_r8(enc, CTL_REG_ESTAT); eir_reg = enc_r8(enc, CTL_REG_EIR); if (eir_reg & ENC_EIR_TXIF) { @@ -520,10 +516,6 @@ static void enc_poll(enc_dev_t *enc) printf("%s: tx error\n", enc->dev->name); enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF); } -#ifdef CONFIG_USE_IRQ - /* set global interrupt enable bit in enc28j60 */ - enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE); -#endif } /* @@ -693,15 +685,6 @@ static int enc_setup(enc_dev_t *enc) /* Reset PDPXMD-bit => half duplex */ enc_phy_write(enc, PHY_REG_PHCON1, 0); -#ifdef CONFIG_USE_IRQ - /* enable interrupts */ - enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE); - enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE); -#endif - return 0; } diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index 14e9c06fac..4886500d6a 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -230,7 +230,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index 2b61405345..7ee8ea7975 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -117,9 +117,6 @@ "1m(uboot),256k(environment),"\ "-(filesystem)" -/* Unsupported features */ -#undef CONFIG_USE_IRQ - /* SPL */ #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds" diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index 030f01c36d..5c27055e45 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -148,8 +148,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 708f0320cf..4c27225d84 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -52,8 +52,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - #define CONFIG_BOOTARGS \ "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index aa308483a2..64d7c45aad 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -71,8 +71,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - #define CONFIG_BOOTARGS \ "root=mtd:main rootfstype=jffs2" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 771a35ab2b..3c03ed3eb1 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -69,8 +69,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - #define CONFIG_BOOTARGS \ "console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1" diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h index 65e9e32f3e..77d6e6aa39 100644 --- a/include/configs/bcm23550_w1d.h +++ b/include/configs/bcm23550_w1d.h @@ -25,7 +25,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ -#define CONFIG_STACKSIZE SZ_256K /* GPIO Driver */ #define CONFIG_KONA_GPIO diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index 2d9b0a878d..03f4ca0338 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -24,7 +24,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ -#define CONFIG_STACKSIZE SZ_256K /* GPIO Driver */ #define CONFIG_KONA_GPIO diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index 868b0a85d4..c187df233c 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -28,7 +28,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (256 * 1024) /* Some commands use this as the default load address */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 45511be282..14b25d410b 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -237,7 +237,6 @@ #define CONFIG_SERIAL_TAG /* misc */ -#define CONFIG_STACKSIZE (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_MISC_INIT_R diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 2c9c0142bb..87d2012984 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -136,8 +136,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 888899eacb..73b43bd7ad 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -150,12 +150,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 99f0daece3..f012af547f 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -74,7 +74,6 @@ #define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ -#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ /* Monitor configuration */ #undef CONFIG_CMD_DATE @@ -161,12 +160,6 @@ /* Run-time memory allocatons */ #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_STACKSIZE (128 * 1024) - -#if defined(CONFIG_USE_IRQ) -#define CONFIG_STACKSIZE_IRQ (4 * 1024) -#define CONFIG_STACKSIZE_FIQ (4 * 1024) -#endif #define CONFIG_SYS_MALLOC_LEN (512 * 1024) diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index afb5b73899..084839702b 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -99,8 +99,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10800000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 48c9e0b3e9..658f4d932d 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -76,8 +76,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index f86e20caa2..43b1fb030c 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -260,7 +260,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index d7b9c18c89..abc4214bc0 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -69,9 +69,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_STACKSIZE (2048) - - /* * After booting the board for the first time, new ethernet addresses * should be generated and assigned to the environment variables diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index 2ce39ffecf..258fd3ac62 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -113,7 +113,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index dfb72384d3..d8bbc802d2 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -269,12 +269,6 @@ #define CONFIG_LS102XA_STREAM_ID -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 15850f2b52..b349b367eb 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -537,12 +537,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_LS102XA_STREAM_ID -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 5d6a64acbd..fcf035b86a 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -403,12 +403,6 @@ #define CONFIG_LS102XA_STREAM_ID -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 6a345c0400..b14e944897 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -396,12 +396,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 476387d5ad..0cf6010a6c 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -434,12 +434,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (30 * 1024) - #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index a2ab77a727..c04ae96f9d 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -180,8 +180,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 -#define CONFIG_STACKSIZE (128 * 1024) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 3e7e5a3997..f35d1265b0 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index 8215e63baa..62159a16b7 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -113,8 +113,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 448b575c28..971f6c2f31 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -95,8 +95,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index aff7a24587..e63da43692 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -123,8 +123,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 71c22fffa8..f466c626a2 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -150,7 +150,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index c65a9e5474..5bc26aac7e 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -137,8 +137,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 81d769f21f..9807ace1d9 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -178,8 +178,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index f6e4b3bc78..37f365dc55 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -88,7 +88,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_8K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 6b128df464..e99968c805 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -48,7 +48,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ @@ -381,13 +380,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 6700073aa2..85e95b3177 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -48,7 +48,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 286598d2de..f506c9c8df 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -226,12 +226,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index dacb78ab69..9042dc269e 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x88000000 #define CONFIG_SYS_MALLOC_LEN (256 << 10) #define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) -#define CONFIG_STACKSIZE (4 << 10) /* regular stack */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 8ad7fa620d..26b1b1147c 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 0b12bf3d55..398b3aa343 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -199,12 +199,6 @@ #define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) #endif -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - #if 0 /* Configure PXE */ #define CONFIG_BOOTP_PXE diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5a9ec02368..d69f513c65 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -228,9 +228,6 @@ # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ #endif /* SPI support */ -/* Unsupported features */ -#undef CONFIG_USE_IRQ - #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII #define CONFIG_PHY_GIGE diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index a456e458aa..8609f2a0a9 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -66,8 +66,6 @@ #define CONFIG_SYS_MALLOC_LEN (2 << 20) -#define CONFIG_STACKSIZE (64 << 10) - #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 55280f203f..5776d89c97 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -58,7 +58,6 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) -#define CONFIG_STACKSIZE (256 * 1024) #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 377ae00a7b..cda2fec519 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -155,11 +155,6 @@ /* standalone support */ #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR -/* baudrate */ - -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ - /* FLASH and environment organization */ #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 035a9325b3..3f2da5795d 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -196,13 +196,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 319279e4fa..baf818ba1a 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -179,9 +179,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ - /* Ethernet */ #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 284046740c..b5af700e38 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -137,7 +137,4 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ - #endif diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index f76e0a5c1f..c83cd76b86 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -28,7 +28,6 @@ #define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \ GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index e72332cd1b..1bfc438b81 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -349,8 +349,6 @@ "panicboot=echo No boot device !!! reset\0" \ TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \ -#define CONFIG_STACKSIZE (128u * SZ_1K) - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h index 1d737ccd3e..c6f39c38b3 100644 --- a/include/configs/udoo_neo.h +++ b/include/configs/udoo_neo.h @@ -69,7 +69,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index ee90045cad..3e7dc9b685 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -209,12 +209,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80010000 #define CONFIG_SYS_MEMTEST_END 0x87C00000 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM (0x80000000) diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index ade5c2736f..9a517a9738 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -33,8 +33,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/warp.h b/include/configs/warp.h index 865f2ac81c..5274b274a4 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M) -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/warp7.h b/include/configs/warp7.h index b3e1f2e597..23b6eae533 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -85,8 +85,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 -#define CONFIG_STACKSIZE SZ_128K - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 3f837e86fb..f546c385e9 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -119,13 +119,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 5169504dc7..b1aa57935d 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -66,7 +66,6 @@ # define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */ #endif -#define CONFIG_SYS_STACKSIZE (512 << 10) /* stack 512KB */ #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */ /* Linux boot param area in RAM (used only when booting linux) */ @@ -110,7 +109,6 @@ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* Keep it simple, poll only */ #define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_MISC_INIT_R diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 811ba91d95..04b6a95052 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2859,9 +2859,6 @@ CONFIG_SSP1_BASE CONFIG_SSP2_BASE CONFIG_SSP3_BASE CONFIG_STACKBASE -CONFIG_STACKSIZE -CONFIG_STACKSIZE_FIQ -CONFIG_STACKSIZE_IRQ CONFIG_STANDALONE_LOAD_ADDR CONFIG_STATIC_BOARD_REV CONFIG_STATIC_RELA @@ -6052,7 +6049,6 @@ CONFIG_SYS_SSD_BASE CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SST_SECT CONFIG_SYS_SST_SECTSZ -CONFIG_SYS_STACKSIZE CONFIG_SYS_STACK_LENGTH CONFIG_SYS_STACK_SIZE CONFIG_SYS_STATUS_C @@ -6562,7 +6558,6 @@ CONFIG_USB_XHCI_PCI CONFIG_USER_LOWLEVEL_INIT CONFIG_USE_FDT CONFIG_USE_INTERRUPT -CONFIG_USE_IRQ CONFIG_USE_NAND CONFIG_USE_NETDEV CONFIG_USE_NOR |