diff options
| -rw-r--r-- | board/ti/am335x/mux.c | 46 |
1 files changed, 42 insertions, 4 deletions
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index c7460eb70b..5e902ab68d 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -17,6 +17,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/hardware.h> #include <asm/io.h> +#include <i2c.h> #define MUX_CFG(value, offset) \ __raw_writel(value, (CTRL_BASE + offset)); @@ -364,22 +365,59 @@ void enable_i2c0_pin_mux(void) configure_module_pin_mux(i2c0_pin_mux); } -void enable_board_pin_mux(struct am335x_baseboard_id *header) +/* + * The AM335x GP EVM, if daughter card(s) are connected, can have 8 + * different profiles. These profiles determine what peripherals are + * valid and need pinmux to be configured. + */ +#define PROFILE_NONE 0x0 +#define PROFILE_0 (1 << 0) +#define PROFILE_1 (1 << 1) +#define PROFILE_2 (1 << 2) +#define PROFILE_3 (1 << 3) +#define PROFILE_4 (1 << 4) +#define PROFILE_5 (1 << 5) +#define PROFILE_6 (1 << 6) +#define PROFILE_7 (1 << 7) +#define PROFILE_MASK 0x7 +#define PROFILE_ALL 0xFF + +/* CPLD registers */ +#define I2C_CPLD_ADDR 0x35 +#define CFG_REG 0x10 + +static unsigned short detect_daughter_board_profile(void) { - /* Enable pinmux that is common to all TI boards. */ - configure_module_pin_mux(i2c1_pin_mux); + unsigned short val; + + if (i2c_probe(I2C_CPLD_ADDR)) + return PROFILE_NONE; - /* Now do board-specific muxes. */ + if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2)) + return PROFILE_NONE; + + return (1 << (val & PROFILE_MASK)); +} + +void enable_board_pin_mux(struct am335x_baseboard_id *header) +{ + /* Do board-specific muxes. */ if (!strncmp(header->name, "A335BONE", HDR_NAME_LEN)) { /* Beaglebone pinmux */ + configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(mii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); } else if (!strncmp(header->config, "SKU#01", 6)) { /* General Purpose EVM */ + unsigned short profile = detect_daughter_board_profile(); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); + /* In profile #2 i2c1 and spi0 conflict. */ + if (profile & ~PROFILE_2) + configure_module_pin_mux(i2c1_pin_mux); } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { /* Starter Kit EVM */ + configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux_sk_evm); |