summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README3
-rw-r--r--drivers/net/e1000.c10
-rw-r--r--drivers/net/e1000.h1
-rw-r--r--drivers/net/phy/marvell.c11
-rw-r--r--drivers/net/sh_eth.c4
-rw-r--r--drivers/net/sh_eth.h4
-rw-r--r--include/configs/CRAYL1.h1
-rw-r--r--include/configs/GEN860T.h5
-rw-r--r--include/configs/TOP860.h1
-rw-r--r--include/configs/ep8260.h1
-rw-r--r--include/configs/utx8245.h1
-rw-r--r--net/link_local.c2
-rw-r--r--net/tftp.c8
13 files changed, 35 insertions, 17 deletions
diff --git a/README b/README
index b5c1c0377b..f386041140 100644
--- a/README
+++ b/README
@@ -2975,9 +2975,6 @@ Configuration Settings:
non page size aligned address and this could cause major
problems.
-- CONFIG_SYS_TFTP_LOADADDR:
- Default load address for network file downloads
-
- CONFIG_SYS_LOADS_BAUD_CHANGE:
Enable temporary baudrate change while serial download
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 2d4da4b386..8ba98b27d5 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -1688,6 +1688,16 @@ e1000_init_hw(struct eth_device *nic)
E1000_WRITE_REG(hw, TXDCTL, ctrl);
}
+ /* Set the receive descriptor write back policy */
+
+ if (hw->mac_type >= e1000_82571) {
+ ctrl = E1000_READ_REG(hw, RXDCTL);
+ ctrl =
+ (ctrl & ~E1000_RXDCTL_WTHRESH) |
+ E1000_RXDCTL_FULL_RX_DESC_WB;
+ E1000_WRITE_REG(hw, RXDCTL, ctrl);
+ }
+
switch (hw->mac_type) {
default:
break;
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index fd1d8f8717..1bbae5085a 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -1551,6 +1551,7 @@ struct e1000_hw {
#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+#define E1000_RXDCTL_FULL_RX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
/* Transmit Descriptor Control */
#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index e51e799e29..4b271989ac 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -425,6 +425,16 @@ static struct phy_driver M88E1118_driver = {
.shutdown = &genphy_shutdown,
};
+static struct phy_driver M88E1118R_driver = {
+ .name = "Marvell 88E1118R",
+ .uid = 0x1410e40,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1118_config,
+ .startup = &m88e1118_startup,
+ .shutdown = &genphy_shutdown,
+};
+
static struct phy_driver M88E1121R_driver = {
.name = "Marvell 88E1121R",
.uid = 0x1410cb0,
@@ -461,6 +471,7 @@ int phy_marvell_init(void)
phy_register(&M88E1145_driver);
phy_register(&M88E1121R_driver);
phy_register(&M88E1118_driver);
+ phy_register(&M88E1118R_driver);
phy_register(&M88E1111S_driver);
phy_register(&M88E1011S_driver);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 2d9cc328b5..e6fc8c8bf6 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -417,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
printf(SHETHER_NAME ": 100Base/");
#if defined(SH_ETH_TYPE_GETHER)
sh_eth_write(eth, GECMR_100B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(eth, 1, RTRATE);
#elif defined(CONFIG_CPU_SH7724)
val = ECMR_RTM;
@@ -426,7 +426,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
printf(SHETHER_NAME ": 10Base/");
#if defined(SH_ETH_TYPE_GETHER)
sh_eth_write(eth, GECMR_10B, GECMR);
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(eth, 0, RTRATE);
#endif
}
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 61d2df9063..568fafe5f5 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -288,7 +288,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xfee00000
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
#if defined(CONFIG_SH_ETHER_USE_GETHER)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xfee00000
@@ -346,7 +346,7 @@ enum DMAC_T_BIT {
/* GECMR */
enum GECMR_BIT {
-#if defined(CONFIG_CPU_SH7757)
+#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00,
#else
GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00,
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 1daec69677..6bceccbc14 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -153,7 +153,6 @@
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */
-#define CONFIG_SYS_TFTP_LOADADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_SYS_DRAM_TEST 1
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index b98caccb81..9a649ca125 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -96,11 +96,6 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/*
- * Set default load address for tftp network downloads
- */
-#define CONFIG_SYS_TFTP_LOADADDR 0x01000000
-
-/*
* Turn off the watchdog timer
*/
#undef CONFIG_WATCHDOG
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 36921ca8b9..4849f94c99 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -416,7 +416,6 @@
#define CONFIG_IPADDR 10.0.4.111
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_TFTP_LOADADDR 0x00100000
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index ccfe032ca7..5a87cc5d3d 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -371,7 +371,6 @@
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_TFTP_LOADADDR 0x00100000 /* default load address for network file downloads */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index d203bb4dd7..66568c8d00 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -65,7 +65,6 @@
#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */
#define CONFIG_SERVERIP 10.8.17.105 /* Spree */
-#define CONFIG_SYS_TFTP_LOADADDR 10000
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=FFA00000\0" \
diff --git a/net/link_local.c b/net/link_local.c
index d52f13adb4..1ba796ebdf 100644
--- a/net/link_local.c
+++ b/net/link_local.c
@@ -103,7 +103,7 @@ static void configure_wait(void)
void link_local_start(void)
{
ip = getenv_IPaddr("llipaddr");
- if (ip != 0 && (ip & IN_CLASSB_NET) != LINKLOCAL_ADDR) {
+ if (ip != 0 && (ntohl(ip) & IN_CLASSB_NET) != LINKLOCAL_ADDR) {
puts("invalid link address");
net_set_state(NETLOOP_FAIL);
return;
diff --git a/net/tftp.c b/net/tftp.c
index 59a8ebb3cf..09790eb7cf 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -40,6 +40,7 @@
static ulong TftpTimeoutMSecs = TIMEOUT;
static int TftpTimeoutCountMax = TIMEOUT_COUNT;
+static ulong time_start; /* Record time we started tftp */
/*
* These globals govern the timeout behavior when attempting a connection to a
@@ -299,6 +300,12 @@ static void tftp_complete(void)
TftpNumchars++;
}
#endif
+ time_start = get_timer(time_start);
+ if (time_start > 0) {
+ puts("\n\t "); /* Line up with "Loading: " */
+ print_size(NetBootFileXferSize /
+ time_start * 1000, "/s");
+ }
puts("\ndone\n");
net_set_state(NETLOOP_SUCCESS);
}
@@ -775,6 +782,7 @@ void TftpStart(enum proto_t protocol)
TftpState = STATE_SEND_RRQ;
}
+ time_start = get_timer(0);
TftpTimeoutCountMax = TftpRRQTimeoutCountMax;
NetSetTimeout(TftpTimeoutMSecs, TftpTimeout);