diff options
| -rw-r--r-- | cmd/Kconfig | 260 |
1 files changed, 130 insertions, 130 deletions
diff --git a/cmd/Kconfig b/cmd/Kconfig index cd72ea8e56..b6e2ac3e81 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -483,6 +483,12 @@ endmenu menu "Device access commands" +config CMD_ARMFLASH + #depends on FLASH_CFI_DRIVER + bool "armflash" + help + ARM Ltd reference designs flash partition access + config CMD_CLK bool "clk - Show clock frequencies" help @@ -492,6 +498,25 @@ config CMD_CLK clock values from associated drivers. However currently no command exists for this. +config CMD_DEMO + bool "demo - Demonstration commands for driver model" + depends on DM + help + Provides a 'demo' command which can be used to play around with + driver model. To use this properly you will need to enable one or + both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). + Otherwise you will always get an empty list of devices. The demo + devices are defined in the sandbox device tree, so the easiest + option is to use sandbox and pass the -d point to sandbox's + u-boot.dtb file. + +config CMD_DFU + bool "dfu" + select USB_FUNCTION_DFU + help + Enables the command "dfu" which is used to have U-Boot create a DFU + class device via USB. + config CMD_DM bool "dm - Access to driver model information" depends on DM @@ -503,17 +528,88 @@ config CMD_DM can be useful to see the state of driver model for debugging or interest. -config CMD_DEMO - bool "demo - Demonstration commands for driver model" - depends on DM +config CMD_FDC + bool "fdcboot - Boot from floppy device" help - Provides a 'demo' command which can be used to play around with - driver model. To use this properly you will need to enable one or - both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). - Otherwise you will always get an empty list of devices. The demo - devices are defined in the sandbox device tree, so the easiest - option is to use sandbox and pass the -d point to sandbox's - u-boot.dtb file. + The 'fdtboot' command allows booting an image from a floppy disk. + +config CMD_FLASH + bool "flinfo, erase, protect" + default y + help + NOR flash support. + flinfo - print FLASH memory information + erase - FLASH memory + protect - enable or disable FLASH write protection + +config CMD_FPGA + bool "fpga" + default y + help + FPGA support. + +config CMD_FPGA_LOADBP + bool "fpga loadbp - load partial bitstream (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGA_LOADFS + bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a FAT filesystem. + +config CMD_FPGA_LOADMK + bool "fpga loadmk - load bitstream from image" + depends on CMD_FPGA + help + Supports loading an FPGA device from a image generated by mkimage. + +config CMD_FPGA_LOADP + bool "fpga loadp - load partial bitstream" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGAD + bool "fpgad - dump FPGA registers" + help + (legacy, needs conversion to driver model) + Provides a way to dump FPGA registers by calling the board-specific + fpga_get_reg() function. This functions similarly to the 'md' + command. + +config CMD_FUSE + bool "fuse - support for the fuse subssystem" + help + (deprecated - needs conversion to driver model) + This allows reading, sensing, programming or overriding fuses + which control the behaviour of the device. The command uses the + fuse_...() API. + +config CMD_GPIO + bool "gpio" + help + GPIO support. + +config CMD_GPT + bool "GPT (GUID Partition Table) command" + select PARTITION_UUIDS + select EFI_PARTITION + help + Enable the 'gpt' command to ready and write GPT style partition + tables. + +config CMD_GPT_RENAME + bool "GPT partition renaming commands" + depends on CMD_GPT + help + Enables the 'gpt' command to interchange names on two GPT + partitions via the 'gpt swap' command or to rename single + partitions via the 'rename' command. config CMD_IDE bool "ide - Support for IDE drivers" @@ -566,6 +662,11 @@ config CMD_IOTRACE might be useful to enhance tracing to only checksum the accesses and not the data read/written. +config CMD_I2C + bool "i2c" + help + I2C support. + config CMD_LOADB bool "loadb" default y @@ -578,37 +679,6 @@ config CMD_LOADS help Load an S-Record file over serial line -config CMD_FLASH - bool "flinfo, erase, protect" - default y - help - NOR flash support. - flinfo - print FLASH memory information - erase - FLASH memory - protect - enable or disable FLASH write protection - -config CMD_GPT - bool "GPT (GUID Partition Table) command" - select PARTITION_UUIDS - select EFI_PARTITION - help - Enable the 'gpt' command to ready and write GPT style partition - tables. - -config CMD_GPT_RENAME - bool "GPT partition renaming commands" - depends on CMD_GPT - help - Enables the 'gpt' command to interchange names on two GPT - partitions via the 'gpt swap' command or to rename single - partitions via the 'rename' command. - -config CMD_ARMFLASH - #depends on FLASH_CFI_DRIVER - bool "armflash" - help - ARM Ltd reference designs flash partition access - config CMD_MMC bool "mmc" help @@ -646,6 +716,25 @@ config CMD_PART Read and display information about the partition table on various media. +config CMD_REMOTEPROC + bool "remoteproc" + depends on REMOTEPROC + help + Support for Remote Processor control + +config CMD_SATA + bool "sata - Access SATA subsystem" + select SATA + help + SATA (Serial Advanced Technology Attachment) is a serial bus + standard for connecting to hard drives and other storage devices. + This command provides information about attached devices and allows + reading, writing and other operations. + + SATA replaces PATA (originally just ATA), which stands for Parallel AT + Attachment, where AT refers to an IBM AT (Advanced Technology) + computer released in 1984. + config CMD_SF bool "sf" help @@ -656,105 +745,16 @@ config CMD_SPI help SPI utility command. -config CMD_I2C - bool "i2c" - help - I2C support. - config CMD_USB bool "usb" help USB support. -config CMD_DFU - bool "dfu" - select USB_FUNCTION_DFU - help - Enables the command "dfu" which is used to have U-Boot create a DFU - class device via USB. - config CMD_USB_MASS_STORAGE bool "UMS usb mass storage" help USB mass storage support -config CMD_FPGA - bool "fpga" - default y - help - FPGA support. - -config CMD_FPGA_LOADBP - bool "fpga loadbp - load partial bitstream (Xilinx only)" - depends on CMD_FPGA - help - Supports loading an FPGA device from a bitstream buffer containing - a partial bitstream. - -config CMD_FPGA_LOADFS - bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" - depends on CMD_FPGA - help - Supports loading an FPGA device from a FAT filesystem. - -config CMD_FPGA_LOADMK - bool "fpga loadmk - load bitstream from image" - depends on CMD_FPGA - help - Supports loading an FPGA device from a image generated by mkimage. - -config CMD_FPGA_LOADP - bool "fpga loadp - load partial bitstream" - depends on CMD_FPGA - help - Supports loading an FPGA device from a bitstream buffer containing - a partial bitstream. - -config CMD_FPGAD - bool "fpgad - dump FPGA registers" - help - (legacy, needs conversion to driver model) - Provides a way to dump FPGA registers by calling the board-specific - fpga_get_reg() function. This functions similarly to the 'md' - command. - -config CMD_FUSE - bool "fuse - support for the fuse subssystem" - help - (deprecated - needs conversion to driver model) - This allows reading, sensing, programming or overriding fuses - which control the behaviour of the device. The command uses the - fuse_...() API. - -config CMD_REMOTEPROC - bool "remoteproc" - depends on REMOTEPROC - help - Support for Remote Processor control - -config CMD_GPIO - bool "gpio" - help - GPIO support. - -config CMD_FDC - bool "fdcboot - Boot from floppy device" - help - The 'fdtboot' command allows booting an image from a floppy disk. - -config CMD_SATA - bool "sata - Access SATA subsystem" - select SATA - help - SATA (Serial Advanced Technology Attachment) is a serial bus - standard for connecting to hard drives and other storage devices. - This command provides information about attached devices and allows - reading, writing and other operations. - - SATA replaces PATA (originally just ATA), which stands for Parallel AT - Attachment, where AT refers to an IBM AT (Advanced Technology) - computer released in 1984. - endmenu |