diff options
| -rw-r--r-- | drivers/net/phy/aquantia.c | 17 |
1 files changed, 9 insertions, 8 deletions
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c index c4bd443001..25d30a65e7 100644 --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -306,30 +306,29 @@ struct { AQUANTIA_VND1_GSTART_RATE_1G}, [PHY_INTERFACE_MODE_SGMII_2500] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G, AQUANTIA_VND1_GSTART_RATE_2_5G}, - [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, - AQUANTIA_VND1_GSTART_RATE_10G}, [PHY_INTERFACE_MODE_XFI] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, AQUANTIA_VND1_GSTART_RATE_10G}, [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G, AQUANTIA_VND1_GSTART_RATE_10G}, }; -static int aquantia_set_proto(struct phy_device *phydev) +static int aquantia_set_proto(struct phy_device *phydev, + phy_interface_t interface) { int i; - if (!aquantia_syscfg[phydev->interface].cnt) + if (!aquantia_syscfg[interface].cnt) return 0; /* set the default rate to enable the SI link */ phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, - aquantia_syscfg[phydev->interface].start_rate); + aquantia_syscfg[interface].start_rate); /* set selected protocol for all relevant line side link speeds */ - for (i = 0; i <= aquantia_syscfg[phydev->interface].cnt; i++) + for (i = 0; i <= aquantia_syscfg[interface].cnt; i++) phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSYSCFG_BASE + i, - aquantia_syscfg[phydev->interface].syscfg); + aquantia_syscfg[interface].syscfg); return 0; } @@ -444,6 +443,8 @@ int aquantia_config(struct phy_device *phydev) * on FW config */ if (interface == PHY_INTERFACE_MODE_XGMII) { + debug("use XFI or USXGMII SI protos, XGMII is not valid\n"); + reg_val1 = phy_read(phydev, MDIO_MMD_PHYXS, AQUANTIA_SYSTEM_INTERFACE_SR); if ((reg_val1 & AQUANTIA_SI_IN_USE_MASK) == AQUANTIA_SI_USXGMII) @@ -466,7 +467,7 @@ int aquantia_config(struct phy_device *phydev) mdelay(10); /* configure protocol based on phydev->interface */ - aquantia_set_proto(phydev); + aquantia_set_proto(phydev, interface); /* apply custom configuration based on DT */ aquantia_dts_config(phydev); |