diff options
-rw-r--r-- | arch/arm/mach-rmobile/Kconfig.32 | 8 | ||||
-rw-r--r-- | arch/arm/mach-rmobile/include/mach/boot0.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-rmobile/lowlevel_init_ca15.S | 2 | ||||
-rw-r--r-- | board/renesas/porter/porter_spl.c | 34 | ||||
-rw-r--r-- | board/renesas/stout/stout_spl.c | 34 | ||||
-rw-r--r-- | configs/porter_defconfig | 30 | ||||
-rw-r--r-- | configs/stout_defconfig | 30 | ||||
-rw-r--r-- | include/configs/porter.h | 8 | ||||
-rw-r--r-- | include/configs/stout.h | 8 |
9 files changed, 51 insertions, 107 deletions
diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index d5b00ef379..bcadb21ba9 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -70,21 +70,17 @@ config TARGET_PORTER bool "Porter board" select DM select DM_SERIAL - select SUPPORT_TPL select SUPPORT_SPL - select SPL_DM if SPL select USE_TINY_PRINTF - select TPL_TINY_MEMSET + select SPL_TINY_MEMSET config TARGET_STOUT bool "Stout board" select DM select DM_SERIAL - select SUPPORT_TPL select SUPPORT_SPL - select SPL_DM if SPL select USE_TINY_PRINTF - select TPL_TINY_MEMSET + select SPL_TINY_MEMSET endchoice diff --git a/arch/arm/mach-rmobile/include/mach/boot0.h b/arch/arm/mach-rmobile/include/mach/boot0.h index 3edd461cbf..61044698bf 100644 --- a/arch/arm/mach-rmobile/include/mach/boot0.h +++ b/arch/arm/mach-rmobile/include/mach/boot0.h @@ -1,5 +1,5 @@ /* - * Specialty padding for the RCar Gen2 TPL JTAG loading + * Specialty padding for the RCar Gen2 SPL JTAG loading * * SPDX-License-Identifier: GPL-2.0 */ @@ -10,7 +10,7 @@ _start: ARM_VECTORS -#ifdef CONFIG_TPL_BUILD +#ifdef CONFIG_SPL_BUILD .word 0x0badc0d3; .word 0x0badc0d3; .word 0x0badc0d3; diff --git a/arch/arm/mach-rmobile/lowlevel_init_ca15.S b/arch/arm/mach-rmobile/lowlevel_init_ca15.S index ef2280bea4..806a3bc2f9 100644 --- a/arch/arm/mach-rmobile/lowlevel_init_ca15.S +++ b/arch/arm/mach-rmobile/lowlevel_init_ca15.S @@ -11,7 +11,7 @@ #include <linux/linkage.h> ENTRY(lowlevel_init) -#ifndef CONFIG_TPL_BUILD +#ifndef CONFIG_SPL_BUILD mrc p15, 0, r4, c0, c0, 5 /* mpidr */ orr r4, r4, r4, lsr #6 and r4, r4, #7 /* id 0-3 = ca15.0,1,2,3 */ diff --git a/board/renesas/porter/porter_spl.c b/board/renesas/porter/porter_spl.c index 4b4dd4d4aa..55f4cace0c 100644 --- a/board/renesas/porter/porter_spl.c +++ b/board/renesas/porter/porter_spl.c @@ -27,7 +27,6 @@ #define SD2CKCR 0xE615026C #define SD_97500KHZ 0x7 -#ifdef CONFIG_TPL_BUILD struct reg_config { u16 off; u32 val; @@ -45,7 +44,7 @@ static void dbsc_wait(u16 reg) ; } -static void tpl_init_sys(void) +static void spl_init_sys(void) { u32 r0 = 0; @@ -65,7 +64,7 @@ static void tpl_init_sys(void) :"=r"(r0)); } -static void tpl_init_pfc(void) +static void spl_init_pfc(void) { static const struct reg_config pfc_with_unlock[] = { { 0x0090, 0x60000000 }, @@ -125,7 +124,7 @@ static void tpl_init_pfc(void) pfc_base | pfc_without_unlock[i].off); } -static void tpl_init_gpio(void) +static void spl_init_gpio(void) { static const u16 gpio_offs[] = { 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x5400, 0x5800 @@ -164,7 +163,7 @@ static void tpl_init_gpio(void) writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); } -static void tpl_init_lbsc(void) +static void spl_init_lbsc(void) { static const struct reg_config lbsc_config[] = { { 0x00, 0x00000020 }, @@ -192,7 +191,7 @@ static void tpl_init_lbsc(void) writel(0, lbsc_base | lbsc_offs[i]); } -static void tpl_init_dbsc(void) +static void spl_init_dbsc(void) { static const struct reg_config dbsc_config1[] = { { 0x0280, 0x0000a55a }, @@ -412,7 +411,7 @@ static void tpl_init_dbsc(void) } -static void tpl_init_qspi(void) +static void spl_init_qspi(void) { mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); @@ -446,14 +445,13 @@ void board_init_f(ulong dummy) */ writel(SD_97500KHZ, SD2CKCR); - tpl_init_sys(); - tpl_init_pfc(); - tpl_init_gpio(); - tpl_init_lbsc(); - tpl_init_dbsc(); - tpl_init_qspi(); + spl_init_sys(); + spl_init_pfc(); + spl_init_gpio(); + spl_init_lbsc(); + spl_init_dbsc(); + spl_init_qspi(); } -#endif void spl_board_init(void) { @@ -463,18 +461,17 @@ void spl_board_init(void) void board_boot_order(u32 *spl_boot_list) { -#ifdef CONFIG_TPL_BUILD const u32 jtag_magic = 0x1337c0de; const u32 load_magic = 0xb33fc0de; /* * If JTAG probe sets special word at 0xe6300020, then it must - * put U-Boot into RAM and TPL will start it from RAM. + * put U-Boot into RAM and SPL will start it from RAM. */ - if (readl(CONFIG_TPL_TEXT_BASE + 0x20) == jtag_magic) { + if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { printf("JTAG boot detected!\n"); - while (readl(CONFIG_TPL_TEXT_BASE + 0x24) != load_magic) + while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) ; spl_boot_list[0] = BOOT_DEVICE_RAM; @@ -482,7 +479,6 @@ void board_boot_order(u32 *spl_boot_list) return; } -#endif /* Boot from SPI NOR with YMODEM UART fallback. */ spl_boot_list[0] = BOOT_DEVICE_SPI; diff --git a/board/renesas/stout/stout_spl.c b/board/renesas/stout/stout_spl.c index 1b061756bc..ed443fdcc2 100644 --- a/board/renesas/stout/stout_spl.c +++ b/board/renesas/stout/stout_spl.c @@ -27,7 +27,6 @@ #define SD2CKCR 0xE615026C #define SD_97500KHZ 0x7 -#ifdef CONFIG_TPL_BUILD struct reg_config { u16 off; u32 val; @@ -45,7 +44,7 @@ static void dbsc_wait(u16 reg) ; } -static void tpl_init_sys(void) +static void spl_init_sys(void) { u32 r0 = 0; @@ -65,7 +64,7 @@ static void tpl_init_sys(void) :"=r"(r0)); } -static void tpl_init_pfc(void) +static void spl_init_pfc(void) { static const struct reg_config pfc_with_unlock[] = { { 0x0090, 0x00140300 }, @@ -120,7 +119,7 @@ static void tpl_init_pfc(void) pfc_base | pfc_without_unlock[i].off); } -static void tpl_init_gpio(void) +static void spl_init_gpio(void) { static const u16 gpio_offs[] = { 0x1000, 0x3000, 0x4000, 0x5000 @@ -155,7 +154,7 @@ static void tpl_init_gpio(void) writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); } -static void tpl_init_lbsc(void) +static void spl_init_lbsc(void) { static const struct reg_config lbsc_config[] = { { 0x00, 0x00000020 }, @@ -183,7 +182,7 @@ static void tpl_init_lbsc(void) writel(0, lbsc_base | lbsc_offs[i]); } -static void tpl_init_dbsc(void) +static void spl_init_dbsc(void) { static const struct reg_config dbsc_config1[] = { { 0x0280, 0x0000a55a }, @@ -398,7 +397,7 @@ static void tpl_init_dbsc(void) } -static void tpl_init_qspi(void) +static void spl_init_qspi(void) { mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); @@ -432,14 +431,13 @@ void board_init_f(ulong dummy) */ writel(SD_97500KHZ, SD2CKCR); - tpl_init_sys(); - tpl_init_pfc(); - tpl_init_gpio(); - tpl_init_lbsc(); - tpl_init_dbsc(); - tpl_init_qspi(); + spl_init_sys(); + spl_init_pfc(); + spl_init_gpio(); + spl_init_lbsc(); + spl_init_dbsc(); + spl_init_qspi(); } -#endif void spl_board_init(void) { @@ -449,18 +447,17 @@ void spl_board_init(void) void board_boot_order(u32 *spl_boot_list) { -#ifdef CONFIG_TPL_BUILD const u32 jtag_magic = 0x1337c0de; const u32 load_magic = 0xb33fc0de; /* * If JTAG probe sets special word at 0xe6300020, then it must - * put U-Boot into RAM and TPL will start it from RAM. + * put U-Boot into RAM and SPL will start it from RAM. */ - if (readl(CONFIG_TPL_TEXT_BASE + 0x20) == jtag_magic) { + if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { printf("JTAG boot detected!\n"); - while (readl(CONFIG_TPL_TEXT_BASE + 0x24) != load_magic) + while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) ; spl_boot_list[0] = BOOT_DEVICE_RAM; @@ -468,7 +465,6 @@ void board_boot_order(u32 *spl_boot_list) return; } -#endif /* Boot from SPI NOR with YMODEM UART fallback. */ spl_boot_list[0] = BOOT_DEVICE_SPI; diff --git a/configs/porter_defconfig b/configs/porter_defconfig index 3b79ac5e27..1a922429af 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -1,42 +1,29 @@ CONFIG_ARM=y CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_RMOBILE=y CONFIG_SYS_TEXT_BASE=0x50000000 -CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_R8A7791=y CONFIG_TARGET_PORTER=y -CONFIG_TPL_TEXT_BASE=0xe6300000 -CONFIG_TPL_MAX_SIZE=16384 CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="r8a7791-porter-u-boot" -CONFIG_TPL_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_TPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_TPL=y -CONFIG_TPL_BOARD_INIT=y -CONFIG_TPL_NEEDS_SEPARATE_TEXT_BASE=y -CONFIG_TPL_RAM_SUPPORT=y -CONFIG_TPL_RAM_DEVICE=y -CONFIG_TPL_SERIAL_SUPPORT=y -CONFIG_TPL_SPI_FLASH_SUPPORT=y -CONFIG_TPL_SPI_LOAD=y -CONFIG_TPL_SPI_SUPPORT=y -CONFIG_TPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set @@ -59,14 +46,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y -CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas power-domains" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y -CONFIG_SPL_CLK=y CONFIG_CLK_RENESAS=y CONFIG_DM_GPIO=y CONFIG_RCAR_GPIO=y @@ -85,12 +67,10 @@ CONFIG_DM_PCI=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PINCTRL=y CONFIG_PINCONF=y -CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_PFC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y -# CONFIG_TPL_DM_SERIAL is not set CONFIG_SCIF_CONSOLE=y CONFIG_SH_QSPI=y CONFIG_USB=y diff --git a/configs/stout_defconfig b/configs/stout_defconfig index a839f55ed7..c933fbf214 100644 --- a/configs/stout_defconfig +++ b/configs/stout_defconfig @@ -1,42 +1,29 @@ CONFIG_ARM=y CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_RMOBILE=y CONFIG_SYS_TEXT_BASE=0x50000000 -CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_R8A7790=y CONFIG_TARGET_STOUT=y -CONFIG_TPL_TEXT_BASE=0xe6300000 -CONFIG_TPL_MAX_SIZE=16384 CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="r8a7790-stout-u-boot" -CONFIG_TPL_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_TPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_TPL=y -CONFIG_TPL_BOARD_INIT=y -CONFIG_TPL_NEEDS_SEPARATE_TEXT_BASE=y -CONFIG_TPL_RAM_SUPPORT=y -CONFIG_TPL_RAM_DEVICE=y -CONFIG_TPL_SERIAL_SUPPORT=y -CONFIG_TPL_SPI_FLASH_SUPPORT=y -CONFIG_TPL_SPI_LOAD=y -CONFIG_TPL_SPI_SUPPORT=y -CONFIG_TPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set @@ -59,14 +46,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y -CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas power-domains" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y -CONFIG_SPL_CLK=y CONFIG_CLK_RENESAS=y CONFIG_DM_GPIO=y CONFIG_RCAR_GPIO=y @@ -85,12 +67,10 @@ CONFIG_DM_PCI=y CONFIG_PCI_RCAR_GEN2=y CONFIG_PINCTRL=y CONFIG_PINCONF=y -CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_PFC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y -# CONFIG_TPL_DM_SERIAL is not set CONFIG_SCIF_CONSOLE=y CONFIG_SH_QSPI=y CONFIG_USB=y diff --git a/include/configs/porter.h b/include/configs/porter.h index 7c46b55d8f..b1a4c2576e 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -54,13 +54,11 @@ "initrd_high=0xffffffff\0" /* SPL support */ -#define CONFIG_SPL_TEXT_BASE 0xe6304000 +#define CONFIG_SPL_TEXT_BASE 0xe6300000 #define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x40000 +#define CONFIG_SPL_MAX_SIZE 0x4000 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 - -/* TPL support */ -#ifdef CONFIG_TPL_BUILD +#ifdef CONFIG_SPL_BUILD #define CONFIG_CONS_SCIF0 #define CONFIG_SH_SCIF_CLK_FREQ 65000000 #endif diff --git a/include/configs/stout.h b/include/configs/stout.h index 226bea8140..228cb552cb 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -56,13 +56,11 @@ "initrd_high=0xffffffff\0" /* SPL support */ -#define CONFIG_SPL_TEXT_BASE 0xe6304000 +#define CONFIG_SPL_TEXT_BASE 0xe6300000 #define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x40000 +#define CONFIG_SPL_MAX_SIZE 0x4000 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 - -/* TPL support */ -#ifdef CONFIG_TPL_BUILD +#ifdef CONFIG_SPL_BUILD #define CONFIG_CONS_SCIFA0 #define CONFIG_SH_SCIF_CLK_FREQ 52000000 #endif |