diff options
| -rw-r--r-- | arch/arm/dts/tegra20-colibri.dts | 6 | ||||
| -rw-r--r-- | arch/arm/dts/tegra20-paz00.dts | 597 | ||||
| -rw-r--r-- | arch/arm/dts/tegra30-apalis.dts | 2 | ||||
| -rw-r--r-- | arch/arm/mach-tegra/tegra186/nvtboot_board.c | 18 | ||||
| -rw-r--r-- | drivers/pci/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/video/tegra124/display.c | 2 |
6 files changed, 594 insertions, 33 deletions
diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts index 89adfb6041..3c10dd6630 100644 --- a/arch/arm/dts/tegra20-colibri.dts +++ b/arch/arm/dts/tegra20-colibri.dts @@ -16,7 +16,7 @@ i2c2 = "/i2c@7000c400"; mmc0 = "/sdhci@c8000600"; usb0 = "/usb@c5000000"; - usb1 = "/usb@c5004000"; /* on-module only, for ASIX */ + usb1 = "/usb@c5004000"; /* On-module only, for ASIX */ usb2 = "/usb@c5008000"; }; @@ -92,8 +92,10 @@ /* EHCI instance 1: ULPI -> USB3340 -> AX88772B */ usb@c5004000 { status = "okay"; + /* ULPI_RESET */ + nvidia,phy-reset-gpio = + <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; /* VBUS_LAN */ - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts index cf6bd70189..ecf9fbd2ca 100644 --- a/arch/arm/dts/tegra20-paz00.dts +++ b/arch/arm/dts/tegra20-paz00.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { @@ -11,7 +12,13 @@ }; aliases { - usb0 = "/usb@c5008000"; + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartc; + usb0 = "/usb@c5000000"; + usb1 = "/usb@c5004000"; + usb2 = "/usb@c5008000"; mmc0 = "/sdhci@c8000600"; mmc1 = "/sdhci@c8000000"; }; @@ -26,19 +33,475 @@ status = "okay"; rgb { status = "okay"; - nvidia,panel = <&lcd_panel>; + + nvidia,panel = <&panel>; + + display-timings { + timing@0 { + /* PAZ00 has 1024x600 */ + clock-frequency = <54030000>; + hactive = <1024>; + vactive = <600>; + hback-porch = <160>; + hfront-porch = <24>; + hsync-len = <136>; + vback-porch = <3>; + vfront-porch = <61>; + vsync-len = <6>; + hsync-active = <1>; + }; + }; + }; + }; + + hdmi@54280000 { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; + }; + }; + + pinmux@70000014 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata", "atc", "atd", "ate", + "dap2", "gmb", "gmc", "gmd", "spia", + "spib", "spic", "spid", "spie"; + nvidia,function = "gmi"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "pllc_out1"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gpu { + nvidia,pins = "gpu", "sdb", "sdd"; + nvidia,function = "pwm"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + kbcb { + nvidia,pins = "kbcb", "kbcd"; + nvidia,function = "sdio2"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc"; + nvidia,function = "owr"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdc { + nvidia,pins = "sdc"; + nvidia,function = "twc"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spi4"; + }; + spdi { + nvidia,pins = "spdi", "spdo"; + nvidia,function = "rsvd2"; + }; + spif { + nvidia,pins = "spif", "uac"; + nvidia,function = "rsvd4"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "spdif"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dap2", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", + "gpu", "gpu7", "gpv", "i2cp", "pta", + "rm", "sdio1", "slxk", "spdo", "uac", + "uda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap3", "dap4", "dtb", + "dtc", "dte", "slxa", "slxc", "slxd", + "spdi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + conf_csus { + nvidia,pins = "csus", "spia", "spib", "spid", + "spif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + conf_ddc { + nvidia,pins = "ddc", "irrx", "irtx", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "spic", "spig", "uaa", "uab"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + conf_dta { + nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd", + "spie", "spih", "uad", "uca", "ucb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + conf_hdint { + nvidia,pins = "hdint", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhs", "lsc0", "lspi", + "lvs", "pmc"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + }; + conf_lcsn { + nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2", + "lm0", "lm1", "lpp", "lpw0", "lpw1", + "lpw2", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "lvp1", "sdb"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; }; + i2s@70002800 { + status = "okay"; + }; + serial@70006000 { - clock-frequency = < 216000000 >; + status = "okay"; + }; + + serial@70006200 { + status = "okay"; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + lvds_ddc: i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + alc5632: alc5632@1e { + compatible = "realtek,alc5632"; + reg = <0x1e>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + nvec@7000c500 { + compatible = "nvidia,nvec"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <80000>; + request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + slave-addr = <138>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&p5valw_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + sm0 { + regulator-name = "+1.2vs_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + sm1 { + regulator-name = "+1.0vs_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-name = "+3.7vs_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + ldo1 { + regulator-name = "+1.1vs_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo2 { + regulator-name = "+1.2vs_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3 { + regulator-name = "+3.3vs_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5 { + regulator-name = "+2.85vs_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo6 { + /* + * Research indicates this should be + * 1.8v; other boards that use this + * rail for the same purpose need it + * set to 1.8v. The schematic signal + * name is incorrect; perhaps copied + * from an incorrect NVIDIA reference. + */ + regulator-name = "+2.85vs_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hdmi_vdd_reg: ldo7 { + regulator-name = "+3.3vs_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: ldo8 { + regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "+2.85vs_ldo9,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo_rtc { + regulator-name = "+3.3vs_rtc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,sys-clock-req-active-high; + }; + + usb@c5000000 { + status = "okay"; + }; + + usb-phy@c5000000 { + status = "okay"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_LOW>; }; usb@c5008000 { status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + sdhci@c8000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>; @@ -53,6 +516,19 @@ non-removable; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>; + default-brightness-level = <10>; + + backlight-boot-off; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -60,38 +536,101 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; }; - pwm: pwm@7000a000 { - status = "okay"; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; }; - lcd_panel: panel { - /* PAZ00 has 1024x600 */ - clock = <54030000>; - xres = <1024>; - yres = <600>; - right-margin = <160>; - left-margin = <24>; - hsync-len = <136>; - upper-margin = <3>; - lower-margin = <61>; - vsync-len = <6>; - hsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 0>; - nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(U, 4) - GPIO_ACTIVE_HIGH>; - nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(M, 6) - GPIO_ACTIVE_HIGH>; - nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0) - GPIO_ACTIVE_HIGH>; - nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(A, 4) - GPIO_ACTIVE_HIGH>; - nvidia,panel-timings = <400 4 203 17 15>; + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "wifi-led"; + gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "rfkill0"; + }; + }; + + panel: panel { + compatible = "samsung,ltn101nt05", "simple-panel"; + + ddc-i2c-bus = <&lvds_ddc>; + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + p5valw_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+5valw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_pnl_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+3VS,vdd_pnl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_bl_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-alc5632-paz00", + "nvidia,tegra-audio-alc5632"; + + nvidia,model = "Compal PAZ00"; + + nvidia,audio-routing = + "Int Spk", "SPKOUT", + "Int Spk", "SPKOUTN", + "Headset Mic", "MICBIAS1", + "MIC1", "Headset Mic", + "Headset Stereophone", "HPR", + "Headset Stereophone", "HPL", + "DMICDAT", "Digital Mic"; + + nvidia,audio-codec = <&alc5632>; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts index f83f09475e..9e4ab8c26f 100644 --- a/arch/arm/dts/tegra30-apalis.dts +++ b/arch/arm/dts/tegra30-apalis.dts @@ -44,10 +44,12 @@ hvdd-pex-supply = <&sys_3v3_reg>; pci@1,0 { + /* TS_DIFF1/2/3/4 left disabled */ nvidia,num-lanes = <4>; }; pci@2,0 { + /* PCIE1_RX/TX left disabled */ nvidia,num-lanes = <1>; }; diff --git a/arch/arm/mach-tegra/tegra186/nvtboot_board.c b/arch/arm/mach-tegra/tegra186/nvtboot_board.c index 1d78346f98..feb935f0d9 100644 --- a/arch/arm/mach-tegra/tegra186/nvtboot_board.c +++ b/arch/arm/mach-tegra/tegra186/nvtboot_board.c @@ -11,6 +11,19 @@ extern unsigned long nvtboot_boot_x0; +static int set_fdt_addr(void) +{ + int ret; + + ret = setenv_hex("fdt_addr", nvtboot_boot_x0); + if (ret) { + printf("Failed to set fdt_addr to point at DTB: %d\n", ret); + return ret; + } + + return 0; +} + /* * Attempt to use /chosen/nvidia,ether-mac in the nvtboot DTB to U-Boot's * ethaddr environment variable if possible. @@ -47,6 +60,11 @@ static int set_ethaddr_from_nvtboot(void) int tegra_soc_board_init_late(void) { + /* + * Ignore errors here; the value may not be used depending on + * extlinux.conf or boot script content. + */ + set_fdt_addr(); /* Ignore errors here; not all cases care about Ethernet addresses */ set_ethaddr_from_nvtboot(); diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index ff2c37006e..275b29bc32 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -9,7 +9,7 @@ menuconfig PCI if PCI config DM_PCI - bool "Enable driver mode for PCI" + bool "Enable driver model for PCI" depends on DM help Use driver model for PCI. Driver model is the new method for diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c index d8999c3c68..28db96c952 100644 --- a/drivers/video/tegra124/display.c +++ b/drivers/video/tegra124/display.c @@ -343,7 +343,7 @@ static int display_init(struct udevice *dev, void *lcdbase, /* * Before we probe the display device (eDP), tell it that this device - * is are the source of the display data. + * is the source of the display data. */ ret = uclass_find_first_device(UCLASS_DISPLAY, &dp_dev); if (ret) { |