diff options
-rw-r--r-- | board/freescale/common/pixis.c | 214 |
1 files changed, 106 insertions, 108 deletions
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 00eb4a0928..bff6a82e28 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -183,7 +183,7 @@ int set_px_corepll(ulong corepll) void read_from_px_regs(int set) { - u8 mask = 0x1C; + u8 mask = 0x1C; /* COREPLL, MPXPLL, SYSCLK controlled by PIXIS */ u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN0); if (set) @@ -196,7 +196,7 @@ void read_from_px_regs(int set) void read_from_px_regs_altbank(int set) { - u8 mask = 0x04; + u8 mask = 0x04; /* FLASHBANK and FLASHMAP controlled by PIXIS */ u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN1); if (set) @@ -207,15 +207,26 @@ void read_from_px_regs_altbank(int set) } #ifndef CFG_PIXIS_VBOOT_MASK -#define CFG_PIXIS_VBOOT_MASK 0x40 +#define CFG_PIXIS_VBOOT_MASK (0x40) #endif +void clear_altbank(void) +{ + u8 tmp; + + tmp = in8(PIXIS_BASE + PIXIS_VBOOT); + tmp &= ~CFG_PIXIS_VBOOT_MASK; + + out8(PIXIS_BASE + PIXIS_VBOOT, tmp); +} + + void set_altbank(void) { u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VBOOT); - tmp ^= CFG_PIXIS_VBOOT_MASK; + tmp |= CFG_PIXIS_VBOOT_MASK; out8(PIXIS_BASE + PIXIS_VBOOT, tmp); } @@ -226,11 +237,11 @@ void set_px_go(void) u8 tmp; tmp = in8(PIXIS_BASE + PIXIS_VCTL); - tmp = tmp & 0x1E; + tmp = tmp & 0x1E; /* clear GO bit */ out8(PIXIS_BASE + PIXIS_VCTL, tmp); tmp = in8(PIXIS_BASE + PIXIS_VCTL); - tmp = tmp | 0x01; + tmp = tmp | 0x01; /* set GO bit - start reset sequencer */ out8(PIXIS_BASE + PIXIS_VCTL, tmp); } @@ -292,7 +303,7 @@ static ulong strfractoint(uchar *strptr) * simply create the intarr. */ i = 0; - while (strptr[i] != 46) { + while (strptr[i] != '.') { if (strptr[i] == 0) { no_dec = 1; break; @@ -312,7 +323,7 @@ static ulong strfractoint(uchar *strptr) } else { j = 0; i++; /* Skipping the decimal point */ - while ((strptr[i] > 47) && (strptr[i] < 58)) { + while ((strptr[i] >= '0') && (strptr[i] <= '9')) { decarr[j] = strptr[i]; i++; j++; @@ -339,8 +350,14 @@ static ulong strfractoint(uchar *strptr) int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - ulong val; - ulong corepll; + unsigned int i; + char *p_cf = NULL; + char *p_cf_sysclk = NULL; + char *p_cf_corepll = NULL; + char *p_cf_mpxpll = NULL; + char *p_altbank = NULL; + char *p_wd = NULL; + unsigned int unknown_param = 0; /* * No args is a simple reset request. @@ -350,116 +367,97 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* not reached */ } - if (strcmp(argv[1], "cf") == 0) { + for (i = 1; i < argc; i++) { + if (strcmp(argv[i], "cf") == 0) { + p_cf = argv[i]; + if (i + 3 >= argc) { + break; + } + p_cf_sysclk = argv[i+1]; + p_cf_corepll = argv[i+2]; + p_cf_mpxpll = argv[i+3]; + i += 3; + continue; + } - /* - * Reset with frequency changed: - * cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio> - */ - if (argc < 5) { - puts(cmdtp->usage); - return 1; + if (strcmp(argv[i], "altbank") == 0) { + p_altbank = argv[i]; + continue; } - read_from_px_regs(0); - - val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10)); - - corepll = strfractoint((uchar *)argv[3]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10)); - if (val == 3) { - puts("Setting registers VCFGEN0 and VCTL\n"); - read_from_px_regs(1); - puts("Resetting board with values from "); - puts("VSPEED0, VSPEED1, VCLKH, and VCLKL \n"); - set_px_go(); - } else { - puts(cmdtp->usage); - return 1; + if (strcmp(argv[i], "wd") == 0) { + p_wd = argv[i]; + continue; } - while (1) ; /* Not reached */ - - } else if (strcmp(argv[1], "altbank") == 0) { - - /* - * Reset using alternate flash bank: - */ - if (argv[2] == 0) { - /* - * Reset from alternate bank without changing - * frequency and without watchdog timer enabled. - * altbank - */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - if (argc > 2) { - puts(cmdtp->usage); - return 1; - } - puts("Setting registers VCFGNE1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - puts("Resetting board to boot from the other bank.\n"); - set_px_go(); - - } else if (strcmp(argv[2], "cf") == 0) { - /* - * Reset with frequency changed - * altbank cf <SYSCLK freq> <COREPLL ratio> - * <MPXPLL ratio> - */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10)); - corepll = strfractoint((uchar *)argv[4]); - val = val + set_px_corepll(corepll); - val = val + set_px_mpxpll(simple_strtoul(argv[5], - NULL, 10)); - if (val == 3) { - puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs(1); - read_from_px_regs_altbank(1); - puts("Enabling watchdog timer on the FPGA\n"); - puts("Resetting board with values from "); - puts("VSPEED0, VSPEED1, VCLKH and VCLKL "); - puts("to boot from the other bank.\n"); - set_px_go_with_watchdog(); - } else { - puts(cmdtp->usage); - return 1; - } + unknown_param = 1; + } - while (1) ; /* Not reached */ - - } else if (strcmp(argv[2], "wd") == 0) { - /* - * Reset from alternate bank without changing - * frequencies but with watchdog timer enabled: - * altbank wd - */ - read_from_px_regs(0); - read_from_px_regs_altbank(0); - puts("Setting registers VCFGEN1, VBOOT, and VCTL\n"); - set_altbank(); - read_from_px_regs_altbank(1); - puts("Enabling watchdog timer on the FPGA\n"); - puts("Resetting board to boot from the other bank.\n"); - set_px_go_with_watchdog(); - while (1) ; /* Not reached */ - - } else { - puts(cmdtp->usage); + /* + * Check that cf has all required parms + */ + if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll)) + || unknown_param) { + puts(cmdtp->help); + return 1; + } + + /* + * PIXIS seems to be sensitive to the ordering of + * the registers that are touched. + */ + read_from_px_regs(0); + + if (p_altbank) { + read_from_px_regs_altbank(0); + } + clear_altbank(); + + /* + * Clock configuration specified. + */ + if (p_cf) { + unsigned long sysclk; + unsigned long corepll; + unsigned long mpxpll; + + sysclk = simple_strtoul(p_cf_sysclk, NULL, 10); + corepll = strfractoint((uchar *) p_cf_corepll); + mpxpll = simple_strtoul(p_cf_mpxpll, NULL, 10); + + if (!(set_px_sysclk(sysclk) + && set_px_corepll(corepll) + && set_px_mpxpll(mpxpll))) { + puts(cmdtp->help); return 1; } + read_from_px_regs(1); + } + /* + * Altbank specified + * + * NOTE CHANGE IN BEHAVIOR: previous code would default + * to enabling watchdog if altbank is specified. + * Now the watchdog must be enabled explicitly using 'wd'. + */ + if (p_altbank) { + set_altbank(); + read_from_px_regs_altbank(1); + } + + /* + * Reset with watchdog specified. + */ + if (p_wd) { + set_px_go_with_watchdog(); } else { - puts(cmdtp->usage); - return 1; + set_px_go(); } + /* + * Shouldn't be reached. + */ return 0; } |