39 files changed, 474 insertions, 273 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index efdfedb856..66f00403cc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -42,6 +42,10 @@ Yuli Barcohen <yuli@arabellasw.com>
 	Rattler			MPC8248
 	ZPC1900			MPC8265
 
+Michael Barkowski <michael.barkowski@freescale.com>
+
+	MPC8323ERDB		MPC8323
+
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 
 	sacsng			MPC8260
@@ -217,6 +221,10 @@ The LEOX team <team@leox.org>
 
 	ELPT860			MPC860T
 
+Dave Liu <daveliu@freescale.com>
+
+	MPC8360EMDS		MPC8360
+
 Nye Liu <nyet@zumanetworks.com>
 
 	ZUMA			MPC7xx_74xx
@@ -273,6 +281,10 @@ Denis Peter <d.peter@mpl.ch>
 	MIP405			PPC4xx
 	PIP405			PPC4xx
 
+Kim Phillips <kim.phillips@freescale.com>
+
+	MPC8349EMDS		MPC8349
+
 Daniel Poirot <dan.poirot@windriver.com>
 
 	sbc8240			MPC8240
@@ -321,6 +333,11 @@ Peter De Schrijver <p2@mind.be>
 
 	ML2			PPC4xx
 
+Timur Tabi <timur@freescale.com>
+
+	MPC8349E-mITX		MPC8349
+	MPC8349E-mITX-GP	MPC8349
+
 Erik Theisen <etheisen@mindspring.com>
 
 	W7OLMC			PPC4xx
@@ -353,19 +370,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Timur Tabi <timur@freescale.com>
-
-	MPC8349E-mITX		MPC8349
-	MPC8349E-mITX-GP	MPC8349
-
-Kim Phillips <kim.phillips@freescale.com>
-
-	MPC8349EMDS		MPC8349
-
-Dave Liu <daveliu@freescale.com>
-
-	MPC8360EMDS		MPC8360
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index a0b9f28d0d..feacc1087d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -299,6 +299,7 @@ LIST_8260="		\
 LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_66	\
+	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC8349EMDS	\
 	MPC8349ITX	\
diff --git a/Makefile b/Makefile
index 65efd3f5e0..62531a5f53 100644
--- a/Makefile
+++ b/Makefile
@@ -1688,7 +1688,7 @@ MPC8313ERDB_66_config: unconfig
 		echo -n "...66M..." ; \
 		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
+	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
 
 MPC8323ERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
@@ -1716,10 +1716,10 @@ MPC832XEMDS_SLAVE_config:	unconfig
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
+	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
 
 MPC8349EMDS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
 
 MPC8349ITX_config \
 MPC8349ITX_LOWBOOT_config \
@@ -1733,7 +1733,7 @@ MPC8349ITXGP_config:	unconfig
 	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
 		echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
 	fi
-	@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx
+	@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
 
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
@@ -1758,7 +1758,7 @@ MPC8360EMDS_SLAVE_config:	unconfig
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
-	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
+	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
 
 sbc8349_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
new file mode 100644
index 0000000000..8c013c72fb
--- /dev/null
+++ b/board/freescale/common/pq-mds-pib.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Tony Li <tony.li@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+
+#include "pq-mds-pib.h"
+
+int pib_init(void)
+{
+	u8 val8;
+	u8 orig_i2c_bus;
+
+	/* Switch temporarily to I2C bus #2 */
+	orig_i2c_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	val8 = 0;
+#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE)
+	/* Assign PIB PMC slot to desired PCI bus */
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+#if defined(CONFIG_MPC832XEMDS)
+	val8 = 0xf9;            /* PMC2, PMC3 slot to PCI bus */
+#else
+	val8 = 0xf3;		/* PMC1, PMC2, PMC3 slot to PCI bus */
+#endif
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+
+	eieio();
+
+#if defined(CONFIG_MPC832XEMDS)
+	printf("PCI 32bit bus on PMC2 &PMC3\n");
+#else
+	printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n");
+#endif
+#endif
+
+#if defined(CONFIG_PQ_MDS_PIB_ATM)
+#if defined(CONFIG_MPC8360EMDS)
+	val8 = 0;
+	i2c_write(0x20, 0x6, 1, &val8, 1);
+	i2c_write(0x20, 0x7, 1, &val8, 1);
+
+	val8 = 0xdf;
+	i2c_write(0x20, 0x2, 1, &val8, 1);
+	val8 = 0xf7;
+	i2c_write(0x20, 0x3, 1, &val8, 1);
+
+	eieio();
+
+	printf("QOC3 ATM card on PMC0\n");
+#elif defined(CONFIG_MPC832XEMDS)
+	val = 0;
+	i2c_write(0x26, 0x7, 1, &val, 1);
+	val = 0xf7;
+	i2c_write(0x26, 0x3, 1, &val, 1);
+
+	val = 0;
+	i2c_write(0x21, 0x6, 1, &val, 1);
+	i2c_write(0x21, 0x7, 1, &val, 1);
+
+	val = 0xdf;
+	i2c_write(0x21, 0x2, 1, &val, 1);
+	val = 0xef;
+	i2c_write(0x21, 0x3, 1, &val, 1);
+
+	eieio();
+
+	printf("QOC3 ATM card on PMC1\n");
+#endif
+#endif
+	/* Reset to original I2C bus */
+	i2c_set_bus_num(orig_i2c_bus);
+	return 0;
+}
diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h
new file mode 100644
index 0000000000..67066fd118
--- /dev/null
+++ b/board/freescale/common/pq-mds-pib.h
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ */
+
+extern int pib_init(void);
diff --git a/board/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile
index a987e510dd..a987e510dd 100644
--- a/board/mpc8313erdb/Makefile
+++ b/board/freescale/mpc8313erdb/Makefile
diff --git a/board/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk
index f76826495e..f76826495e 100644
--- a/board/mpc8313erdb/config.mk
+++ b/board/freescale/mpc8313erdb/config.mk
diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 999fe9e39b..861c143df5 100644
--- a/board/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -23,7 +23,11 @@
  */
 
 #include <common.h>
+#if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
 #include <pci.h>
 #include <mpc83xx.h>
 
@@ -96,21 +100,22 @@ void pci_init_board(void)
 	mpc83xx_pci_init(1, reg, warmboot);
 }
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_OF_FLAT_TREE)
 	u32 *p;
 	int len;
 
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
 	p = ft_get_prop(blob, "/memory/reg", &len);
-	if (p) {
+	if (p != NULL) {
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
+#endif
+	ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
 }
 #endif
diff --git a/board/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c
index 4b6778837f..e6e84107eb 100644
--- a/board/mpc8313erdb/sdram.c
+++ b/board/freescale/mpc8313erdb/sdram.c
@@ -112,8 +112,6 @@ long int initdram(int board_type)
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
-	puts("Initializing\n");
-
 	/* DDR SDRAM - Main SODIMM */
 	msize = fixed_sdram();
 
@@ -127,7 +125,6 @@ long int initdram(int board_type)
 		resume_from_sleep();
 #endif
 
-	puts("   DDR RAM: ");
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return msize;
 }
diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c
index 1886f196b2..e738613009 100644
--- a/board/freescale/mpc8323erdb/mpc8323erdb.c
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
@@ -17,7 +17,6 @@
 #include <miiphy.h>
 #include <command.h>
 #include <libfdt.h>
-#include <libfdt_env.h>
 #if defined(CONFIG_PCI)
 #include <pci.h>
 #endif
@@ -92,8 +91,6 @@ long int initdram(int board_type)
 
 	msize = fixed_sdram();
 
-	puts("\n   DDR RAM: ");
-
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
 }
@@ -185,33 +182,21 @@ void pci_init_board(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-
-/*
- * Prototypes of functions that we use.
- */
-void ft_cpu_setup(void *blob, bd_t *bd);
-
-#ifdef CONFIG_PCI
-void ft_pci_setup(void *blob, bd_t *bd);
-#endif
-
-void
-ft_board_setup(void *blob, bd_t *bd)
+void ft_board_setup(void *blob, bd_t *bd)
 {
-	int nodeoffset;
-	int tmp[2];
-
-	nodeoffset = fdt_find_node_by_path(blob, "/memory");
-	if (nodeoffset >= 0) {
-		tmp[0] = cpu_to_be32(bd->bi_memstart);
-		tmp[1] = cpu_to_be32(bd->bi_memsize);
-		fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
+#if defined(CONFIG_OF_FLAT_TREE)
+	u32 *p;
+	int len;
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
 	}
-
+#endif
 	ft_cpu_setup(blob, bd);
-
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
 #endif
 }
-#endif /* CONFIG_OF_BOARD_SETUP */
+#endif
diff --git a/board/mpc8360emds/Makefile b/board/freescale/mpc832xemds/Makefile
index 5ec7a871d4..ea52484c06 100644
--- a/board/mpc8360emds/Makefile
+++ b/board/freescale/mpc832xemds/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o pci.o
+COBJS	:= $(BOARD).o pci.o ../common/pq-mds-pib.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/mpc832xemds/config.mk b/board/freescale/mpc832xemds/config.mk
index 6c3eca7534..6c3eca7534 100644
--- a/board/mpc832xemds/config.mk
+++ b/board/freescale/mpc832xemds/config.mk
diff --git a/board/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c
index 772da678f0..6ba25d4644 100644
--- a/board/mpc832xemds/mpc832xemds.c
+++ b/board/freescale/mpc832xemds/mpc832xemds.c
@@ -29,6 +29,11 @@
 #endif
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
 #endif
 
 const qe_iop_conf_t qe_iop_conf_tab[] = {
@@ -86,6 +91,14 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int board_early_init_r(void)
+{
+#ifdef CONFIG_PQ_MDS_PIB
+	pib_init();
+#endif
+	return 0;
+}
+
 int fixed_sdram(void);
 
 long int initdram(int board_type)
@@ -101,8 +114,6 @@ long int initdram(int board_type)
 
 	msize = fixed_sdram();
 
-	puts("\n   DDR RAM: ");
-
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
 }
@@ -155,22 +166,22 @@ int checkboard(void)
 	return 0;
 }
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_OF_FLAT_TREE)
 	u32 *p;
 	int len;
 
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
 	p = ft_get_prop(blob, "/memory/reg", &len);
 	if (p != NULL) {
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
+#endif
+	ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
 }
 #endif
diff --git a/board/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c
index d0a407ae8a..6bc35c70f2 100644
--- a/board/mpc832xemds/pci.c
+++ b/board/freescale/mpc832xemds/pci.c
@@ -20,6 +20,8 @@
 #include <i2c.h>
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
 #endif
 
 #include <asm/fsl_i2c.h>
@@ -129,7 +131,6 @@ void pci_init_board(void)
 	volatile pcictrl83xx_t *pci_ctrl;
 	volatile pciconf83xx_t *pci_conf;
 
-	u8 val8, orig_i2c_bus;
 	u16 reg16;
 	u32 val32;
 	u32 dev;
@@ -198,43 +199,6 @@ void pci_init_board(void)
 	    PIWAR_IWS_2G;
 
 	/*
-	 * Assign PIB PMC slot to desired PCI bus
-	 */
-
-	/* Switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
-	i2c_set_bus_num(1);
-
-	val8 = 0;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-
-	val8 = 0xf9;		/* PMC2, PMC3 slot to PCI bus */
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-	asm("eieio");
-
-	/* Reset to original I2C bus */
-	i2c_set_bus_num(orig_i2c_bus);
-
-	/*
 	 * Release PCI RST Output signal
 	 */
 	udelay(2000);
@@ -290,8 +254,6 @@ void pci_init_board(void)
 	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
 	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
 
-	printf("PCI 32bit bus on PMC2 & PMC3\n");
-
 	/*
 	 * Hose scan.
 	 */
@@ -299,7 +261,27 @@ void pci_init_board(void)
 }
 #endif				/* CONFIG_PCISLAVE */
 
-#ifdef CONFIG_OF_FLAT_TREE
+#if defined(CONFIG_OF_LIBFDT)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int err;
+	int tmp[2];
+
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(hose[0].first_busno);
+		tmp[1] = cpu_to_be32(hose[0].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
+	}
+}
+#elif defined(CONFIG_OF_FLAT_TREE)
 void
 ft_pci_setup(void *blob, bd_t *bd)
 {
diff --git a/board/mpc832xemds/Makefile b/board/freescale/mpc8349emds/Makefile
index 5ec7a871d4..5ec7a871d4 100644
--- a/board/mpc832xemds/Makefile
+++ b/board/freescale/mpc8349emds/Makefile
diff --git a/board/mpc8349emds/config.mk b/board/freescale/mpc8349emds/config.mk
index edf64d1508..edf64d1508 100644
--- a/board/mpc8349emds/config.mk
+++ b/board/freescale/mpc8349emds/config.mk
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 521d1bbd4e..39c0916276 100644
--- a/board/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -34,6 +34,8 @@
 #endif
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
 #endif
 
 int fixed_sdram(void);
@@ -68,8 +70,6 @@ long int initdram (int board_type)
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
-	puts("Initializing\n");
-
 	/* DDR SDRAM - Main SODIMM */
 	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
@@ -88,7 +88,7 @@ long int initdram (int board_type)
 	 */
 	ddr_enable_ecc(msize * 1024 * 1024);
 #endif
-	puts("   DDR RAM: ");
+
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
 }
@@ -189,9 +189,6 @@ void sdram_init(void)
 	volatile lbus83xx_t *lbc= &immap->lbus;
 	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
 
-	puts("\n   SDRAM on Local Bus: ");
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
 	/*
 	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
 	 */
@@ -253,26 +250,25 @@ void sdram_init(void)
 #else
 void sdram_init(void)
 {
-	puts("   SDRAM on Local Bus is NOT available!\n");
 }
 #endif
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_OF_FLAT_TREE)
 	u32 *p;
 	int len;
 
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
 	p = ft_get_prop(blob, "/memory/reg", &len);
 	if (p != NULL) {
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
+#endif
+	ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
 }
 #endif
diff --git a/board/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c
index d6a12b82a4..ae94a2f384 100644
--- a/board/mpc8349emds/pci.c
+++ b/board/freescale/mpc8349emds/pci.c
@@ -25,6 +25,12 @@
 #include <pci.h>
 #include <asm/mpc8349_pci.h>
 #include <i2c.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -382,7 +388,40 @@ pci_init_board(void)
 
 }
 
-#ifdef CONFIG_OF_FLAT_TREE
+#if defined(CONFIG_OF_LIBFDT)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int err;
+	int tmp[2];
+
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
+	}
+#ifdef CONFIG_MPC83XX_PCI2
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
+		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
+	}
+#endif
+}
+#elif defined(CONFIG_OF_FLAT_TREE)
 void
 ft_pci_setup(void *blob, bd_t *bd)
 {
diff --git a/board/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile
index 31bcdb8642..31bcdb8642 100644
--- a/board/mpc8349itx/Makefile
+++ b/board/freescale/mpc8349itx/Makefile
diff --git a/board/mpc8349itx/config.mk b/board/freescale/mpc8349itx/config.mk
index 79f1765fa1..79f1765fa1 100644
--- a/board/mpc8349itx/config.mk
+++ b/board/freescale/mpc8349itx/config.mk
diff --git a/board/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 178b1d36fb..c82f7847a2 100644
--- a/board/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -39,6 +39,8 @@
 #endif
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
 #endif
 
 #ifndef CONFIG_SPD_EEPROM
@@ -74,7 +76,7 @@ int fixed_sdram(void)
 
 	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
 	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
-	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR;
+	im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1;
 	im->ddr.sdram_mode =
 	    (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
 	im->ddr.sdram_interval =
@@ -160,7 +162,6 @@ long int initdram(int board_type)
 		ddr_enable_ecc(msize * 1048576);
 #endif
 
-	puts("   DDR RAM: ");
 	/* return total bus RAM size(bytes) */
 	return msize * 1024 * 1024;
 }
@@ -385,22 +386,22 @@ int misc_init_r(void)
 	return rc;
 }
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_OF_FLAT_TREE)
 	u32 *p;
 	int len;
 
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-
 	p = ft_get_prop(blob, "/memory/reg", &len);
 	if (p != NULL) {
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
+#endif
+	ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
 }
 #endif
diff --git a/board/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
index e81ad27356..5ca094d4cb 100644
--- a/board/mpc8349itx/pci.c
+++ b/board/freescale/mpc8349itx/pci.c
@@ -31,6 +31,8 @@
 #include <i2c.h>
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#elif defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -332,8 +334,40 @@ void pci_init_board(void)
 #endif
 }
 
-#endif				/* CONFIG_PCI */
-#ifdef CONFIG_OF_FLAT_TREE
+#if defined(CONFIG_OF_LIBFDT)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int err;
+	int tmp[2];
+
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
+	}
+#ifdef CONFIG_MPC83XX_PCI2
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
+		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
+	}
+#endif
+}
+#elif defined(CONFIG_OF_FLAT_TREE)
 void
 ft_pci_setup(void *blob, bd_t *bd)
 {
@@ -355,3 +389,4 @@ ft_pci_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_PCI */
diff --git a/board/mpc8349emds/Makefile b/board/freescale/mpc8360emds/Makefile
index 5ec7a871d4..ea52484c06 100644
--- a/board/mpc8349emds/Makefile
+++ b/board/freescale/mpc8360emds/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o pci.o
+COBJS	:= $(BOARD).o pci.o ../common/pq-mds-pib.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/mpc8360emds/config.mk b/board/freescale/mpc8360emds/config.mk
index 9ace8860cf..9ace8860cf 100644
--- a/board/mpc8360emds/config.mk
+++ b/board/freescale/mpc8360emds/config.mk
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 3fa093d1d5..e050cd4395 100644
--- a/board/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -29,7 +29,9 @@
 #include <ft_build.h>
 #elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
-#include <libfdt_env.h>
+#endif
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
 #endif
 
 const qe_iop_conf_t qe_iop_conf_tab[] = {
@@ -107,6 +109,14 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int board_early_init_r(void)
+{
+#ifdef CONFIG_PQ_MDS_PIB
+	pib_init();
+#endif
+	return 0;
+}
+
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
@@ -139,7 +149,7 @@ long int initdram(int board_type)
 	 * Initialize SDRAM if it is on local bus.
 	 */
 	sdram_init();
-	puts("   DDR RAM: ");
+
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
 }
@@ -224,8 +234,6 @@ void sdram_init(void)
 	volatile lbus83xx_t *lbc = &immap->lbus;
 	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
 
-	puts("\n   SDRAM on Local Bus: ");
-	print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 	/*
 	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
 	 */
@@ -281,36 +289,13 @@ void sdram_init(void)
 #else
 void sdram_init(void)
 {
-	puts("SDRAM on Local Bus is NOT available!\n");
 }
 #endif
 
-#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
-     && defined(CONFIG_OF_BOARD_SETUP)
-
-/*
- * Prototypes of functions that we use.
- */
-void ft_cpu_setup(void *blob, bd_t *bd);
-
-#ifdef CONFIG_PCI
-void ft_pci_setup(void *blob, bd_t *bd);
-#endif
-
-void
-ft_board_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
 {
-#if defined(CONFIG_OF_LIBFDT)
-	int nodeoffset;
-	int tmp[2];
-
-	nodeoffset = fdt_find_node_by_path(blob, "/memory");
-	if (nodeoffset >= 0) {
-		tmp[0] = cpu_to_be32(bd->bi_memstart);
-		tmp[1] = cpu_to_be32(bd->bi_memsize);
-		fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
-	}
-#else
+#if defined(CONFIG_OF_FLAT_TREE)
 	u32 *p;
 	int len;
 
@@ -320,10 +305,9 @@ ft_board_setup(void *blob, bd_t *bd)
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
 #endif
-
+	ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
 #endif
-	ft_cpu_setup(blob, bd);
 }
-#endif /* CONFIG_OF_x */
+#endif
diff --git a/board/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c
index 8f904710ca..cf7ef90443 100644
--- a/board/mpc8360emds/pci.c
+++ b/board/freescale/mpc8360emds/pci.c
@@ -22,7 +22,6 @@
 #include <ft_build.h>
 #elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
-#include <libfdt_env.h>
 #endif
 
 #include <asm/fsl_i2c.h>
@@ -132,7 +131,6 @@ void pci_init_board(void)
 	volatile pcictrl83xx_t *pci_ctrl;
 	volatile pciconf83xx_t *pci_conf;
 
-	u8 val8, orig_i2c_bus;
 	u16 reg16;
 	u32 val32;
 	u32 dev;
@@ -201,43 +199,6 @@ void pci_init_board(void)
 	    PIWAR_IWS_2G;
 
 	/*
-	 * Assign PIB PMC slot to desired PCI bus
-	 */
-
-	/* Switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
-	i2c_set_bus_num(1);
-
-	val8 = 0;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-
-	val8 = 0xf3;		/*PMC1, PMC2, PMC3 slot to PCI bus */
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-
-	val8 = 0;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-	asm("eieio");
-
-	/* Reset to original I2C bus */
-	i2c_set_bus_num(orig_i2c_bus);
-
-	/*
 	 * Release PCI RST Output signal
 	 */
 	udelay(2000);
@@ -293,8 +254,6 @@ void pci_init_board(void)
 	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
 	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
 
-	printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
-
 	/*
 	 * Hose scan.
 	 */
@@ -314,7 +273,12 @@ ft_pci_setup(void *blob, bd_t *bd)
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(hose[0].first_busno);
 		tmp[1] = cpu_to_be32(hose[0].last_busno);
-		err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
 	}
 }
 #elif defined(CONFIG_OF_FLAT_TREE)
diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
index 4cd447e097..86166ea443 100644
--- a/board/sbc8349/sbc8349.c
+++ b/board/sbc8349/sbc8349.c
@@ -64,8 +64,6 @@ long int initdram (int board_type)
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
-	puts("Initializing\n");
-
 	/* DDR SDRAM - Main SODIMM */
 	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
@@ -84,7 +82,6 @@ long int initdram (int board_type)
 	 */
 	ddr_enable_ecc(msize * 1024 * 1024);
 #endif
-	puts("   DDR RAM: ");
 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
 }
@@ -130,7 +127,7 @@ int fixed_sdram(void)
 #if defined(CONFIG_DDR_2T_TIMING)
 		| SDRAM_CFG_2T_EN
 #endif
-		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
+		| SDRAM_CFG_SDRAM_TYPE_DDR1;
 #if defined (CONFIG_DDR_32BIT)
 	/* for 32-bit mode burst length is 8 */
 	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index 9c35e22c8e..7d0b055484 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -114,7 +114,7 @@ long int initdram (int board_type)
 	/* enable DDR controller */
 	im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
 		SDRAM_CFG_SREN |
-		SDRAM_CFG_SDRAM_TYPE_DDR);
+		SDRAM_CFG_SDRAM_TYPE_DDR1);
 	SYNC;
 
 	/* size detection */
@@ -388,7 +388,7 @@ static void set_ddr_config(void) {
 	/* don't enable DDR controller yet */
 	im->ddr.sdram_cfg =
 		SDRAM_CFG_SREN |
-		SDRAM_CFG_SDRAM_TYPE_DDR;
+		SDRAM_CFG_SDRAM_TYPE_DDR1;
 	SYNC;
 
 	/* Set SDRAM mode */
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index adf8083010..e634f0a25b 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -35,12 +35,10 @@
 #include <ft_build.h>
 #elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
-#include <libfdt_env.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
-
 int checkcpu(void)
 {
 	volatile immap_t *immr;
@@ -333,9 +331,7 @@ void watchdog_reset (void)
  */
 static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
-	/*
-	 * Fix it up if it exists, don't create it if it doesn't exist.
-	 */
+	/* Fix it up if it exists, don't create it if it doesn't exist */
 	if (fdt_get_property(blob, nodeoffset, name, 0)) {
 		return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6);
 	}
@@ -345,9 +341,7 @@ static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd)
 /* second onboard ethernet port */
 static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
-	/*
-	 * Fix it up if it exists, don't create it if it doesn't exist.
-	 */
+	/* Fix it up if it exists, don't create it if it doesn't exist */
 	if (fdt_get_property(blob, nodeoffset, name, 0)) {
 		return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6);
 	}
@@ -358,9 +352,7 @@ static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd)
 /* third onboard ethernet port */
 static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
-	/*
-	 * Fix it up if it exists, don't create it if it doesn't exist.
-	 */
+	/* Fix it up if it exists, don't create it if it doesn't exist */
 	if (fdt_get_property(blob, nodeoffset, name, 0)) {
 		return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6);
 	}
@@ -371,9 +363,7 @@ static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd)
 /* fourth onboard ethernet port */
 static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
-	/*
-	 * Fix it up if it exists, don't create it if it doesn't exist.
-	 */
+	/* Fix it up if it exists, don't create it if it doesn't exist */
 	if (fdt_get_property(blob, nodeoffset, name, 0)) {
 		return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6);
 	}
@@ -384,9 +374,7 @@ static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd)
 static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	u32  tmp;
-	/*
-	 * Create or update the property.
-	 */
+	/* Create or update the property */
 	tmp = cpu_to_be32(bd->bi_busfreq);
 	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
 }
@@ -394,14 +382,38 @@ static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *b
 static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	u32  tmp;
-	/*
-	 * Create or update the property.
-	 */
+	/* Create or update the property */
 	tmp = cpu_to_be32(OF_TBCLK);
 	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
 }
 
 
+static int fdt_set_clockfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
+{
+	u32  tmp;
+	/* Create or update the property */
+	tmp = cpu_to_be32(gd->core_clk);
+	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+#ifdef CONFIG_QE
+static int fdt_set_qe_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
+{
+	u32  tmp;
+	/* Create or update the property */
+	tmp = cpu_to_be32(gd->qe_clk);
+	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+static int fdt_set_qe_brgfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
+{
+	u32  tmp;
+	/* Create or update the property */
+	tmp = cpu_to_be32(gd->brg_clk);
+	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
+}
+#endif
+
 /*
  * Fixups to the fdt.
  */
@@ -420,6 +432,10 @@ static const struct {
 	},
 	{	"/cpus/" OF_CPU,
 		"clock-frequency",
+		fdt_set_clockfreq
+	},
+	{	"/" OF_SOC,
+		"bus-frequency",
 		fdt_set_busfreq
 	},
 	{	"/" OF_SOC "/serial@4500",
@@ -450,6 +466,15 @@ static const struct {
 		fdt_set_eth1
 	},
 #endif
+#ifdef CONFIG_QE
+	{	"/" OF_QE,
+		"brg-frequency",
+		fdt_set_qe_brgfreq
+	},
+	{	"/" OF_QE,
+		"bus-frequency",
+		fdt_set_qe_busfreq
+	},
 #ifdef CONFIG_UEC_ETH1
 #if CFG_UEC1_UCC_NUM == 0  /* UCC1 */
 	{	"/" OF_QE "/ucc@2000",
@@ -481,7 +506,7 @@ static const struct {
 		"local-mac-address",
 		fdt_set_eth1
 	},
-#elif CFG_UEC1_UCC_NUM == 3  /* UCC4 */
+#elif CFG_UEC2_UCC_NUM == 3  /* UCC4 */
 	{	"/" OF_QE "/ucc@3200",
 		"mac-address",
 		fdt_set_eth1
@@ -492,14 +517,16 @@ static const struct {
 	},
 #endif
 #endif /* CONFIG_UEC_ETH2 */
+#endif /* CONFIG_QE */
 };
 
 void
 ft_cpu_setup(void *blob, bd_t *bd)
 {
-	int  nodeoffset;
-	int  err;
-	int  j;
+	int nodeoffset;
+	int err;
+	int j;
+	int tmp[2];
 
 	for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
 		nodeoffset = fdt_find_node_by_path(blob, fixup_props[j].node);
@@ -508,15 +535,29 @@ ft_cpu_setup(void *blob, bd_t *bd)
 						    fixup_props[j].prop, bd);
 			if (err < 0)
 				debug("Problem setting %s = %s: %s\n",
-					fixup_props[j].node,
-					fixup_props[j].prop,
-					fdt_strerror(err));
+				      fixup_props[j].node, fixup_props[j].prop,
+				      fdt_strerror(err));
 		} else {
 			debug("Couldn't find %s: %s\n",
-				fixup_props[j].node,
-				fdt_strerror(nodeoffset));
+			      fixup_props[j].node, fdt_strerror(nodeoffset));
 		}
 	}
+
+	/* update, or add and update /memory node */
+	nodeoffset = fdt_find_node_by_path(blob, "/memory");
+	if (nodeoffset < 0) {
+		nodeoffset = fdt_add_subnode(blob, 0, "memory");
+		if (nodeoffset < 0)
+			debug("failed to add /memory node: %s\n",
+			      fdt_strerror(nodeoffset));
+	}
+	if (nodeoffset >= 0) {
+		fdt_setprop(blob, nodeoffset, "device_type",
+			    "memory", sizeof("memory"));
+		tmp[0] = cpu_to_be32(bd->bi_memstart);
+		tmp[1] = cpu_to_be32(bd->bi_memsize);
+		fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
+	}
 }
 #elif defined(CONFIG_OF_FLAT_TREE)
 void
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index 2298218870..5675afe971 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -28,7 +28,6 @@
 
 #if defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
-#include <libfdt_env.h>
 #elif defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
 #endif
@@ -184,7 +183,12 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
-		err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
 	}
 
 	if (pci_num_buses < 2)
@@ -194,7 +198,12 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
-		err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+		err = fdt_setprop(blob, nodeoffset, "bus-range",
+				  tmp, sizeof(tmp));
+
+		tmp[0] = cpu_to_be32(gd->pci_clk);
+		err = fdt_setprop(blob, nodeoffset, "clock-frequency",
+				  tmp, sizeof(tmp[0]));
 	}
 }
 #elif CONFIG_OF_FLAT_TREE
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 54f0c83d45..ee2d0385e4 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -34,6 +34,30 @@
 #include <asm/mmu.h>
 #include <spd_sdram.h>
 
+void board_add_ram_info(int use_default)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ddr83xx_t *ddr = &immap->ddr;
+
+	printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
+			   >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
+
+	if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
+		puts(", 32-bit");
+	else
+		puts(", 64-bit");
+
+	if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
+		puts(", ECC on)");
+	else
+		puts(", ECC off)");
+
+#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE)
+	puts("\nSDRAM: ");
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
+#endif
+}
+
 #ifdef CONFIG_SPD_EEPROM
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -109,7 +133,7 @@ long int spd_sdram()
 	unsigned int n_ranks;
 	unsigned int odt_rd_cfg, odt_wr_cfg;
 	unsigned char twr_clk, twtr_clk;
-	unsigned char sdram_type;
+	unsigned int sdram_type;
 	unsigned int memsize;
 	unsigned int law_size;
 	unsigned char caslat, caslat_ctrl;
@@ -137,7 +161,7 @@ long int spd_sdram()
 #endif
 	/* Check the memory type */
 	if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
-		printf("DDR: Module mem type is %02X\n", spd.mem_type);
+		debug("DDR: Module mem type is %02X\n", spd.mem_type);
 		return 0;
 	}
 
@@ -578,17 +602,17 @@ long int spd_sdram()
 			burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
 		else
 			burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
-		printf("\n   DDR DIMM: data bus width is 32 bit");
+		debug("\n   DDR DIMM: data bus width is 32 bit");
 	} else {
 		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
-		printf("\n   DDR DIMM: data bus width is 64 bit");
+		debug("\n   DDR DIMM: data bus width is 64 bit");
 	}
 
 	/* Is this an ECC DDR chip? */
 	if (spd.config == 0x02)
-		printf(" with ECC\n");
+		debug(" with ECC\n");
 	else
-		printf(" without ECC\n");
+		debug(" without ECC\n");
 
 	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
 	   Burst type is sequential
@@ -718,26 +742,26 @@ long int spd_sdram()
 	 * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
 	 */
 	if (spd.mem_type == SPD_MEMTYPE_DDR)
-		sdram_type = 2;
+		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
 	else
-		sdram_type = 3;
+		sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
 
 	sdram_cfg = (0
-		     | (1 << 31)			/* DDR enable */
-		     | (1 << 30)			/* Self refresh */
-		     | (sdram_type << 24)		/* SDRAM type */
+		     | SDRAM_CFG_MEM_EN		/* DDR enable */
+		     | SDRAM_CFG_SREN		/* Self refresh */
+		     | sdram_type		/* SDRAM type */
 		     );
 
 	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
 	if (spd.mod_attr & 0x02)
-		sdram_cfg |= 0x10000000;
+		sdram_cfg |= SDRAM_CFG_RD_EN;
 
 	/* The DIMM is 32bit width */
 	if (spd.dataw_lsb == 0x20) {
 		if (spd.mem_type == SPD_MEMTYPE_DDR)
-			sdram_cfg |= 0x000C0000;
+			sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
 		if (spd.mem_type == SPD_MEMTYPE_DDR2)
-			sdram_cfg |= 0x00080000;
+			sdram_cfg |= SDRAM_CFG_32_BE;
 	}
 
 	ddrc_ecc_enable = 0;
@@ -758,7 +782,7 @@ long int spd_sdram()
 	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
 	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
 #endif
-	printf("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
+	debug("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
 
 #if defined(CONFIG_DDR_2T_TIMING)
 	/*
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index bf30616548..cba57fadb9 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -351,6 +351,7 @@ int get_clocks(void)
 	gd->qe_clk = qe_clk;
 	gd->brg_clk = brg_clk;
 #endif
+	gd->pci_clk = pci_sync_in;
 	gd->cpu_clk = gd->core_clk;
 	gd->bus_clk = gd->csb_clk;
 	return 0;
diff --git a/include/common.h b/include/common.h
index 27a660a4d6..9a5a0ab798 100644
--- a/include/common.h
+++ b/include/common.h
@@ -434,6 +434,13 @@ int	checkdcache   (void);
 void	upmconfig     (unsigned int, unsigned int *, unsigned int);
 ulong	get_tbclk     (void);
 void	reset_cpu     (ulong addr);
+#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
+void ft_cpu_setup(void *blob, bd_t *bd);
+#ifdef CONFIG_PCI
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
+#endif
+
 
 /* $(CPU)/serial.c */
 int	serial_init   (void);
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index f92dce541f..96a4cd4311 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -113,12 +113,12 @@
 				/* 0x03200064 */
 #if defined(CONFIG_DDR_2T_TIMING)
 #define CFG_SDRAM_CFG		( SDRAM_CFG_SREN \
-				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
 				| SDRAM_CFG_2T_EN \
 				| SDRAM_CFG_DBW_32 )
 #else
 #define CFG_SDRAM_CFG		( SDRAM_CFG_SREN \
-				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
 				| SDRAM_CFG_32_BE )
 				/* 0x43080000 */
 #endif
@@ -228,7 +228,7 @@
 #define CFG_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 /* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f62ca2c42b..efc317288e 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -30,6 +30,8 @@
 #define CONFIG_MPC83XX		1	/* MPC83xx family */
 #define CONFIG_MPC832X		1	/* MPC832x CPU specific */
 #define CONFIG_MPC832XEMDS	1	/* MPC832XEMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM	/* QOC3 ATM card */
 
 /*
  * System Clock Setup
@@ -87,6 +89,7 @@
 #define CFG_SICRL		0x00000000
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * IMMR new address
@@ -315,7 +318,7 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 /* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 10af5f0bc8..030c621aef 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -339,7 +339,7 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 /* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 58ee13d3f3..b380a1ac93 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -296,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP
 
 /* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 4b32a140e8..094b66e7c9 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -32,6 +32,8 @@
 #define CONFIG_MPC83XX		1 /* MPC83XX family */
 #define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
 #define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
 
 /*
  * System Clock Setup
@@ -88,6 +90,7 @@
 #define CFG_SICRL		0x40000000
 
 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * IMMR new address
@@ -309,13 +312,13 @@
 /*
  * CS4 on Local Bus, to PIB
  */
-#define CFG_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_BR4_PRELIM	0xf8010801 /* CS4 base address at 0xf8010000 */
 #define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
 
 /*
  * CS5 on Local Bus, to PIB
  */
-#define CFG_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_BR5_PRELIM	0xf8008801 /* CS5 base address at 0xf8008000 */
 #define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
 
 /*
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 829dbf9387..4d32c6a376 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -705,8 +705,9 @@
 #define SDRAM_CFG_SREN			0x40000000
 #define SDRAM_CFG_ECC_EN		0x20000000
 #define SDRAM_CFG_RD_EN			0x10000000
-#define SDRAM_CFG_SDRAM_TYPE		0x03000000
-#define SDRAM_CFG_SDRAM_TYPE_DDR	0x02000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR1	0x02000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR2	0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_MASK	0x07000000
 #define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
 #define SDRAM_CFG_DYN_PWR		0x00200000
 #define SDRAM_CFG_32_BE			0x00080000