diff options
| -rw-r--r-- | MAINTAINERS | 5 | ||||
| -rwxr-xr-x | MAKEALL | 1 | ||||
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | board/blackstamp/.gitignore | 1 | ||||
| -rw-r--r-- | board/blackstamp/Makefile | 57 | ||||
| -rw-r--r-- | board/blackstamp/blackstamp.c | 46 | ||||
| -rw-r--r-- | board/blackstamp/config.mk | 32 | ||||
| -rw-r--r-- | board/blackstamp/u-boot.lds.S | 143 | ||||
| -rw-r--r-- | include/configs/blackstamp.h | 275 |
9 files changed, 562 insertions, 2 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 0b3ea1aecb..d75598d381 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -888,6 +888,11 @@ Blackfin Team <u-boot-devel@blackfin.uclinux.org> BF537-minotaur BF537 BF537-srv1 BF537 +Wojtek Skulski <skulski@pas.rochester.edu> +Benjamin Matthews <mben12@gmail.com> + + BLACKSTAMP BF532 + ######################################################################### # End of MAINTAINERS list # ######################################################################### @@ -809,6 +809,7 @@ LIST_blackfin=" \ bf538f-ezkit \ bf548-ezkit \ bf561-ezkit \ + blackstamp \ cm-bf527 \ cm-bf533 \ cm-bf537e \ @@ -3394,7 +3394,7 @@ BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537 # Misc third party boards -BFIN_BOARDS += bf537-minotaur bf537-srv1 +BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp $(BFIN_BOARDS:%=%_config) : unconfig @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) @@ -3570,7 +3570,7 @@ clean: $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \ $(obj)board/bf5{33,37}-stamp/u-boot.lds \ - $(obj)board/bf537-{minotaur,pnav,srv1}/u-boot.lds \ + $(obj)board/{bf537-{minotaur,pnav,srv1},blackstamp}/u-boot.lds \ $(obj)board/{,t}cm-bf5{27,33,37e,48,61}/u-boot.lds \ $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h diff --git a/board/blackstamp/.gitignore b/board/blackstamp/.gitignore new file mode 100644 index 0000000000..945f324549 --- /dev/null +++ b/board/blackstamp/.gitignore @@ -0,0 +1 @@ +/u-boot.lds diff --git a/board/blackstamp/Makefile b/board/blackstamp/Makefile new file mode 100644 index 0000000000..1b217288b9 --- /dev/null +++ b/board/blackstamp/Makefile @@ -0,0 +1,57 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := $(BOARD).o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +$(obj)u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c new file mode 100644 index 0000000000..b671899e06 --- /dev/null +++ b/board/blackstamp/blackstamp.c @@ -0,0 +1,46 @@ +/* + * U-boot - blackstamp.c BlackStamp board specific routines + * Most code stolen from boards/bf533-stamp/bf533-stamp.c + * Edited to the BlackStamp by Ben Matthews for UR LLE + * + * Copyright (c) 2005-2009 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + printf("Board: BlackStamp\n"); + printf("Support: http://blackfin.uclinux.org/gf/project/blackstamp/\n"); + return 0; +} + +phys_size_t initdram(int board_type) +{ + gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; + return gd->bd->bi_memsize; +} + +#ifdef SHARED_RESOURCES +void swap_to(int device_id) +{ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); + SSYNC(); + if (device_id == ETHERNET) + bfin_write_FIO_FLAG_S(PF0); + else if (device_id == FLASH) + bfin_write_FIO_FLAG_C(PF0); + else + printf("Unknown device to switch\n"); + SSYNC(); +} +#endif diff --git a/board/blackstamp/config.mk b/board/blackstamp/config.mk new file mode 100644 index 0000000000..f4a5a80283 --- /dev/null +++ b/board/blackstamp/config.mk @@ -0,0 +1,32 @@ +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# This is not actually used for Blackfin boards so do not change it +#TEXT_BASE = do-not-use-me + +LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds + +# Set some default LDR flags based on boot mode. +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/blackstamp/u-boot.lds.S b/board/blackstamp/u-boot.lds.S new file mode 100644 index 0000000000..8ddfa81dad --- /dev/null +++ b/board/blackstamp/u-boot.lds.S @@ -0,0 +1,143 @@ +/* + * U-boot - u-boot.lds.S + * + * Copyright (c) 2005-2008 Analog Device Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/blackfin.h> +#undef ALIGN +#undef ENTRY +#undef bfin + +/* If we don't actually load anything into L1 data, this will avoid + * a syntax error. If we do actually load something into L1 data, + * we'll get a linker memory load error (which is what we'd want). + * This is here in the first place so we can quickly test building + * for different CPU's which may lack non-cache L1 data. + */ +#ifndef L1_DATA_B_SRAM +# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE +# define L1_DATA_B_SRAM_SIZE 0 +#endif + +OUTPUT_ARCH(bfin) + +MEMORY +{ + ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN + l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE + l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE +} + +ENTRY(_start) +SECTIONS +{ + .text : + { + cpu/blackfin/start.o (.text .text.*) + +#ifdef ENV_IS_EMBEDDED + /* WARNING - the following is hand-optimized to fit within + * the sector before the environment sector. If it throws + * an error during compilation remove an object here to get + * it linked after the configuration sector. + */ + + cpu/blackfin/traps.o (.text .text.*) + cpu/blackfin/interrupt.o (.text .text.*) + cpu/blackfin/serial.o (.text .text.*) + common/dlmalloc.o (.text .text.*) + lib_generic/crc32.o (.text .text.*) + + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o (.text .text.*) +#endif + + __initcode_start = .; + cpu/blackfin/initcode.o (.text .text.*) + __initcode_end = .; + + *(.text .text.*) + } >ram + + .rodata : + { + . = ALIGN(4); + *(.rodata .rodata.*) + *(.rodata1) + *(.eh_frame) + . = ALIGN(4); + } >ram + + .data : + { + . = ALIGN(256); + *(.data .data.*) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } >ram + + .u_boot_cmd : + { + ___u_boot_cmd_start = .; + *(.u_boot_cmd) + ___u_boot_cmd_end = .; + } >ram + + .text_l1 : + { + . = ALIGN(4); + __stext_l1 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l1 = .; + } >l1_code AT>ram + __stext_l1_lma = LOADADDR(.text_l1); + + .data_l1 : + { + . = ALIGN(4); + __sdata_l1 = .; + *(.l1.data) + *(.l1.bss) + . = ALIGN(4); + __edata_l1 = .; + } >l1_data AT>ram + __sdata_l1_lma = LOADADDR(.data_l1); + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss .bss.*) + *(COMMON) + __bss_end = .; + } >ram +} diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h new file mode 100644 index 0000000000..f61e5b7f9c --- /dev/null +++ b/include/configs/blackstamp.h @@ -0,0 +1,275 @@ +/* + * U-boot - Configuration file for BlackStamp board + * Configuration by Ben Matthews for UR LLE using bf533-stamp.h + * as a template + * See http://blackfin.uclinux.org/gf/project/blackstamp/ + */ + +#ifndef __CONFIG_BLACKSTAMP_H__ +#define __CONFIG_BLACKSTAMP_H__ + +#include <asm/blackfin-config-pre.h> + +/* + * Debugging: Set these options if you're having problems + */ +/* + * #define CONFIG_DEBUG_EARLY_SERIAL + * #define DEBUG + * #define CONFIG_DEBUG_DUMP + * #define CONFIG_DEBUG_DUMP_SYMS +*/ +#define CONFIG_PANIC_HANG 0 + +/* CPU Options + * Be sure to set the Silicon Revision Correctly + */ +#define CONFIG_BFIN_CPU bf532-0.5 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 + +/* FLASH/ETHERNET uses the same address range + * Depending on what you have the CPLD doing + * this probably isn't needed + */ +#define SHARED_RESOURCES 1 + +/* Is I2C bit-banged? */ +#undef CONFIG_SOFT_I2 + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 25000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 16 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 3 + +/* + * Network settings + */ + +#ifdef CONFIG_DRIVER_SMC91111 +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME blackstamp +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs +#define CONFIG_SYS_AUTOLOAD "no" + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ +#endif + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x40000 +#define ENV_IS_EMBEDDED_CUSTOM + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_SYS_MALLOC_LEN (384 << 10) + +/* + * Command settings + */ + +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_ENV_OVERWRITE 1 + +#include <config_cmd_default.h> + +#ifdef CONFIG_DRIVER_SMC91111 +# define CONFIG_CMD_DHCP +# define CONFIG_CMD_PING +#else +# undef CONFIG_CMD_NET +#endif + +#ifdef CONFIG_SOFT_I2C +# define CONFIG_CMD_I2C +#endif + +#define CONFIG_CMD_BOOTLDR +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CPLBINFO +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SF +#define CONFIG_CMD_ELF + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTARGS \ + "root=/dev/mtdblock0 rw " \ + "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \ + "earlyprintk=" \ + "serial," \ + "uart" MK_STR(CONFIG_UART_CONSOLE) "," \ + MK_STR(CONFIG_BAUDRATE) " " \ + "console=ttyBF0," MK_STR(CONFIG_BAUDRATE) + +#if defined(CONFIG_CMD_NET) +# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) +# define UBOOT_ENV_FILE "u-boot.bin" +# else +# define UBOOT_ENV_FILE "u-boot.ldr" +# endif +# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +# ifdef CONFIG_SPI +# define UBOOT_ENV_UPDATE \ + "eeprom write $(loadaddr) 0x0 $(filesize)" +# else +# define UBOOT_ENV_UPDATE \ + "sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \ + "sf erase 0 0x40000;" \ + "sf write $(loadaddr) 0 $(filesize)" +# endif +# else +# define UBOOT_ENV_UPDATE \ + "protect off 0x20000000 0x2003FFFF;" \ + "erase 0x20000000 0x2003FFFF;" \ + "cp.b $(loadaddr) 0x20000000 $(filesize)" +# endif +# define NETWORK_ENV_SETTINGS \ + "ubootfile=" UBOOT_ENV_FILE "\0" \ + "update=" \ + "tftp $(loadaddr) $(ubootfile);" \ + UBOOT_ENV_UPDATE \ + "\0" \ + "addip=set bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \ + "$(hostname):eth0:off" \ + "\0" \ + "ramargs=set bootargs " CONFIG_BOOTARGS "\0" \ + "ramboot=" \ + "tftp $(loadaddr) uImage;" \ + "run ramargs;" \ + "run addip;" \ + "bootm" \ + "\0" \ + "nfsargs=set bootargs " \ + "root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \ + "\0" \ + "nfsboot=" \ + "tftp $(loadaddr) vmImage;" \ + "run nfsargs;" \ + "run addip;" \ + "bootm" \ + "\0" +#else +# define NETWORK_ENV_SETTINGS +#endif + +/* + * Console settings + */ +#define CONFIG_BAUDRATE 57600 +#define CONFIG_LOADS_ECHO 1 +#define CONFIG_UART_CONSOLE 0 + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + * Located on the expansion connector on pins 86/85 + * Note these pins are arbitrarily chosen because we aren't using + * them yet. You can (and probably should) change these values! + */ +#ifdef CONFIG_SOFT_I2C + +#define PF_SCL PF9 +#define PF_SDA PF8 + +#define I2C_INIT do { *pFIO_DIR |= PF_SCL; SSYNC(); } while (0) +#define I2C_ACTIVE do { *pFIO_DIR |= PF_SDA; *pFIO_INEN &= ~PF_SDA; SSYNC(); } while (0) +#define I2C_TRISTATE do { *pFIO_DIR &= ~PF_SDA; *pFIO_INEN |= PF_SDA; SSYNC(); } while (0) +#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0) +#define I2C_SDA(bit) \ + do { \ + if (bit) \ + *pFIO_FLAG_S = PF_SDA; \ + else \ + *pFIO_FLAG_C = PF_SDA; \ + SSYNC(); \ + } while (0) +#define I2C_SCL(bit) \ + do { \ + if (bit) \ + *pFIO_FLAG_S = PF_SCL; \ + else \ + *pFIO_FLAG_C = PF_SCL; \ + SSYNC(); \ + } while (0) +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_SYS_I2C_SLAVE 0xFE +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_RTC_BFIN 1 + +/* + * Serial Flash Infomation + */ +#define CONFIG_BFIN_SPI +/* For the M25P64 SCK Should be Kept < 20Mhz */ +#define CONFIG_ENV_SPI_MAX_HZ 20000000 +#define CONFIG_SF_DEFAULT_HZ 20000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +/* + * FLASH organization and environment definitions + */ + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3 +#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983 +#define CONFIG_EBIU_SDRRC_VAL 0x268 +#define CONFIG_EBIU_SDGCTL_VAL 0x911109 + +/* Even though Rev C boards have Parallel Flash + * We aren't supporting it. Newer versions of the + * hardware don't support Parallel Flash at all. + */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_FLASH + +#include <asm/blackfin-config-post.h> + +#endif |