summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/Kconfig12
-rw-r--r--arch/arm/cpu/armv8/Kconfig1
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/fsl-ls1028a-rdb.dts88
-rw-r--r--board/freescale/ls1028a/Kconfig26
-rw-r--r--board/freescale/ls1028a/MAINTAINERS10
-rw-r--r--board/freescale/ls1028a/Makefile8
-rw-r--r--board/freescale/ls1028a/README79
-rw-r--r--board/freescale/ls1028a/ddr.c20
-rw-r--r--board/freescale/ls1028a/ls1028a.c193
-rw-r--r--configs/ls1028ardb_tfa_defconfig61
-rw-r--r--include/configs/ls1028a_common.h200
-rw-r--r--include/configs/ls1028ardb.h77
13 files changed, 776 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 00be3d1721..0c9b035352 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1262,6 +1262,17 @@ config TARGET_LS1012AFRDM
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
+config TARGET_LS1028ARDB
+ bool "Support ls1028ardb"
+ select ARCH_LS1028A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ help
+ Support for Freescale LS1028ARDB platform
+ The LS1028A Development System (RDB) is a high-performance
+ development platform that supports the QorIQ LS1028A
+ Layerscape Architecture processor.
+
config TARGET_LS1088ARDB
bool "Support ls1088ardb"
select ARCH_LS1088A
@@ -1666,6 +1677,7 @@ source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
source "board/freescale/ls1088a/Kconfig"
+source "board/freescale/ls1028a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 7405c3a4a1..54831f7905 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -104,6 +104,7 @@ config PSCI_RESET
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
!TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
!TARGET_LS1012AFRWY && \
+ !TARGET_LS1028ARDB && \
!TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
!TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
!TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0ec7bc987d..8855a01438 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -329,6 +329,7 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2088a-rdb-qspi.dtb \
fsl-ls1088a-rdb.dtb \
fsl-ls1088a-qds.dtb \
+ fsl-ls1028a-rdb.dtb \
fsl-lx2160a-rdb.dtb \
fsl-lx2160a-qds.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
new file mode 100644
index 0000000000..932cfa2275
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1028ARDB device tree source
+ *
+ * Copyright 2019 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+ model = "NXP Layerscape 1028a RDB Board";
+ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
+};
+
+&dspi0 {
+ status = "okay";
+};
+
+&dspi1 {
+ status = "okay";
+};
+
+&dspi2 {
+ status = "okay";
+};
+
+&esdhc0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig
new file mode 100644
index 0000000000..bbfd4dd07d
--- /dev/null
+++ b/board/freescale/ls1028a/Kconfig
@@ -0,0 +1,26 @@
+if TARGET_LS1028ARDB
+
+config SYS_BOARD
+ default "ls1028a"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls1028ardb"
+
+config EMMC_BOOT
+ bool "Support for booting from EMMC"
+ default n
+
+config SYS_TEXT_BASE
+ default 0x96000000 if SD_BOOT || EMMC_BOOT
+ default 0x82000000 if TFABOOT
+ default 0x20100000
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS
new file mode 100644
index 0000000000..135454cfd6
--- /dev/null
+++ b/board/freescale/ls1028a/MAINTAINERS
@@ -0,0 +1,10 @@
+LS1028ARDB BOARD
+M: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
+M: Rai Harninder <harninder.rai@nxp.com>
+M: Rajesh Bhagat <rajesh.bhagat@nxp.com>
+M: Tang Yuantian <andy.tang@nxp.com>
+S: Maintained
+F: board/freescale/ls1028a/
+F: include/configs/ls1028a_common.h
+F: include/configs/ls1028ardb.h
+F: configs/ls1028ardb_tfa_defconfig
diff --git a/board/freescale/ls1028a/Makefile b/board/freescale/ls1028a/Makefile
new file mode 100644
index 0000000000..9bc144cbfe
--- /dev/null
+++ b/board/freescale/ls1028a/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2019 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls1028a.o
+obj-y += ddr.o
diff --git a/board/freescale/ls1028a/README b/board/freescale/ls1028a/README
new file mode 100644
index 0000000000..94a390c917
--- /dev/null
+++ b/board/freescale/ls1028a/README
@@ -0,0 +1,79 @@
+Overview
+--------
+The LS1028A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports ARM SoC LS1028A and its
+derivatives.
+
+LS1028A SoC Overview
+--------------------------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+
+RDB Default Switch Settings (1: ON; 0: OFF)
+-------------------------------------------
+For XSPI NOR boot (default)
+SW2: 1111_1000
+SW3: 1111_0000
+SW5: 0011_1001
+
+For SD Boot
+SW2: 1000_1000
+SW3: 1111_0000
+SW5: 0011_1001
+
+For eMMC Boot
+SW2: 1001_1000
+SW3: 1111_0000
+SW5: 0011_1001
+
+LS1028ARDB board Overview
+-------------------------
+Processor
+ Two Arm Cortex- A72 processor cores:
+ - Based on 64-bit ARMv8 architecture
+ - Up to 1.3 GHz operation
+ - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
+ data cache
+ - Arranged as a single cluster of two cores sharing a single 1 MB L2
+ cache
+DDR memory
+ - Five onboard 1G x8 discrete memory modules (Four data byte lanes
+ ECC)
+ - 32-bit data and 4-bit ECC
+ - One chip select
+ - Data transfer rates of up to 1.6 GT/s
+ - Single-bit error correction and double-bit error detection ECC (4-bit
+ check word across 32-bit data)
+High-speed serial ports(SerDes)
+ - Lane 0: Supports one 1 GbE RJ45 SGMII, connected through the
+ Qualcomm AR8033 PHY
+ - Lane 1: Supports four 1.25 GbE RJ45 QSGMII, each connected
+ through the NXP F104S8A PHY
+ - Lane 2: Connects to one PCIe M.2 Key-E slot to support PCIe Gen3
+ (8 Gbit/s) cards
+ - Lane 3: Connects to one PCIe M.2 Key-E slot or one SATA M.2 Key-B
+ slot through a register mux to support either PCIe Gen 3 (8 Gbit/s) or
+ SATA Gen 3 cards (6 Gbit/s) at a time
+eSDHC
+ - eSDHC1, eSDHC2
+SPI
+ - Connects to two mikroBUS sockets to support mikro-click modules,
+ such as Bluetooth 4.0, 2.4 GHz IEEE 802.15.4 radio transceiver, near
+ field communications (NFC) controller
+Octal SPI (XSPI)
+ - One 256 MB onboard XSPI serial NOR flash memory
+ - One 512 MB onboard XSPI serial NAND flash memory
+ - Supports a QSPI emulator for offboard QSPI emulation
+I2C
+ - All system devices are accessed via I2C1, which is multiplexed on
+ I2C multiplexer PCA9848 to isolate address conflicts and reduce
+ capacitive load
+ - I2C1 is used for EEPROMs, RTC, INA220 current-power sensor,
+ thermal monitor, PCIe/SATA M.2 connectors and mikro-click modules
+ 1 and 2
+CAN
+ - The two CAN DB9 ports can support CAN FD fast phase at data rates of
+ up to 5 Mbit/s
+Serial audio interface(SAI)
+ - Audio codec SGTL5000 provides headphone and audio LINEOUT for
+ stereo speakers
+ - IEEE1588 interface to support audio on SAI4
diff --git a/board/freescale/ls1028a/ddr.c b/board/freescale/ls1028a/ddr.c
new file mode 100644
index 0000000000..74d3af5c35
--- /dev/null
+++ b/board/freescale/ls1028a/ddr.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int fsl_initdram(void)
+{
+ gd->ram_size = tfa_get_dram_size();
+
+ if (!gd->ram_size)
+ gd->ram_size = fsl_ddr_sdram_size();
+
+ return 0;
+}
diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c
new file mode 100644
index 0000000000..e3666c34b6
--- /dev/null
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fsl_ddr.h>
+#include <asm/io.h>
+#include <hwconfig.h>
+#include <fdt_support.h>
+#include <linux/libfdt.h>
+#include <environment.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#include <i2c.h>
+#include <asm/arch/soc.h>
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/arch/ppa.h>
+#endif
+#include <fsl_immap.h>
+#include <netdev.h>
+
+#include <fdtdec.h>
+#include <miiphy.h>
+#include "../common/qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+#ifdef CONFIG_ENV_IS_NOWHERE
+ gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+ ppa_init();
+#endif
+
+#ifndef CONFIG_SYS_EARLY_PCI_INIT
+ pci_init();
+#endif
+
+#if defined(CONFIG_TARGET_LS1028ARDB)
+ u8 val = I2C_MUX_CH_DEFAULT;
+
+ i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1);
+#endif
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+ i2c_early_init_f();
+#endif
+
+ fsl_lsch3_early_init_f();
+ return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+ puts("\nDDR ");
+ print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+ print_ddr_info(0);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+
+ ft_cpu_setup(blob, bd);
+
+ /* fixup DT for the two GPP DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+#ifdef CONFIG_RESV_RAM
+ /* reduce size if reserved memory is within this bank */
+ if (gd->arch.resv_ram >= base[0] &&
+ gd->arch.resv_ram < base[0] + size[0])
+ size[0] = gd->arch.resv_ram - base[0];
+ else if (gd->arch.resv_ram >= base[1] &&
+ gd->arch.resv_ram < base[1] + size[1])
+ size[1] = gd->arch.resv_ram - base[1];
+#endif
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_QIXIS
+int checkboard(void)
+{
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+#endif
+ u8 sw;
+
+ int clock;
+ char *board;
+ char buf[64] = {0};
+ static const char *freq[6] = {"100.00", "125.00", "156.25",
+ "161.13", "322.26", "100.00 SS"};
+
+ cpu_name(buf);
+ /* find the board details */
+ sw = QIXIS_READ(id);
+
+ switch (sw) {
+ case 0x46:
+ board = "QDS";
+ break;
+ case 0x47:
+ board = "RDB";
+ break;
+ case 0x49:
+ board = "HSSI";
+ break;
+ default:
+ board = "unknown";
+ break;
+ }
+
+ sw = QIXIS_READ(arch);
+ printf("Board: %s-%s, Version: %c, boot from ",
+ buf, board, (sw & 0xf) + 'A' - 1);
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+#ifdef CONFIG_TFABOOT
+ if (src == BOOT_SOURCE_SD_MMC) {
+ puts("SD\n");
+ } else if (src == BOOT_SOURCE_SD_MMC2) {
+ puts("eMMC\n");
+ } else {
+#endif
+#ifdef CONFIG_SD_BOOT
+ puts("SD\n");
+#elif defined(CONFIG_EMMC_BOOT)
+ puts("eMMC\n");
+#else
+ switch (sw) {
+ case 0:
+ case 4:
+ printf("NOR\n");
+ break;
+ case 1:
+ printf("NAND\n");
+ break;
+ default:
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+ break;
+ }
+#endif
+#ifdef CONFIG_TFABOOT
+ }
+#endif
+
+ printf("FPGA: v%d (%s)\n", QIXIS_READ(scver), board);
+ puts("SERDES1 Reference : ");
+
+ sw = QIXIS_READ(brdcfg[2]);
+#ifdef CONFIG_TARGET_LS1028ARDB
+ clock = (sw >> 6) & 3;
+#else
+ clock = (sw >> 4) & 0xf;
+#endif
+
+ printf("Clock1 = %sMHz ", freq[clock]);
+#ifdef CONFIG_TARGET_LS1028ARDB
+ clock = (sw >> 4) & 3;
+#else
+ clock = sw & 0xf;
+#endif
+ printf("Clock2 = %sMHz\n", freq[clock]);
+
+ return 0;
+}
+#endif
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
new file mode 100644
index 0000000000..dd27f657be
--- /dev/null
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -0,0 +1,61 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1028ARDB=y
+CONFIG_SYS_FSL_SDHC_CLK_DIV=1
+CONFIG_TFABOOT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-rdb"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SATA_CEVA=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
new file mode 100644
index 0000000000..0db86396e9
--- /dev/null
+++ b/include/configs/ls1028a_common.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __L1028A_COMMON_H
+#define __L1028A_COMMON_H
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LAYERSCAPE
+#define CONFIG_MP
+
+#include <asm/arch/stream_id_lsch3.h>
+#include <asm/arch/config.h>
+#include <asm/arch/soc.h>
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL
+#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
+
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+/*
+ * SMP Definitinos
+ */
+#define CPU_RELEASE_ADDR secondary_boot_func
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY 25000000 /* 25MHz */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
+
+/* I2C */
+#define CONFIG_SYS_I2C
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 128
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "board=ls1028ardb\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x00f00000\0" \
+ "kernel_addr=0x01000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x800000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernelheader_size=0x40000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
+ "kernelhdr_addr_sd=0x4000\0" \
+ "kernelhdr_size_sd=0x10\0" \
+ "console=ttyS0,115200\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1028ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "sd_bootcmd=echo Trying load from SD ..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "env exists secureboot && mmc read $kernelheader_addr_r " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "emmc_bootcmd=echo Trying load from EMMC ..;" \
+ "mmcinfo; mmc dev 1; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "env exists secureboot && mmc read $kernelheader_addr_r " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+
+#define SD_BOOTCOMMAND \
+ "run distro_bootcmd;run sd_bootcmd; " \
+ "env exists secureboot && esbc_halt;"
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+
+#ifndef CONFIG_CMDLINE_EDITING
+#define CONFIG_CMDLINE_EDITING 1
+#endif
+
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+/* MMC */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define OCRAM_NONSECURE_SIZE 0x00010000
+#define CONFIG_ENV_OFFSET 0x500000 /* 5MB */
+#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
+#define CONFIG_ENV_ADDR CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_SECT_SIZE 0x40000
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+/* MMC */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+/* I2C bus multiplexer */
+#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
+#define I2C_MUX_CH_DEFAULT 0x8
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+#endif /* __L1028A_COMMON_H */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
new file mode 100644
index 0000000000..10791be824
--- /dev/null
+++ b/include/configs/ls1028ardb.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __LS1028A_RDB_H
+#define __LS1028A_RDB_H
+
+#include "ls1028a_common.h"
+
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 100000000
+#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4)
+
+#define CONFIG_SYS_RTC_BUS_NUM 0
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_SIZE 0x2000
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define QIXIS_BASE 0x7fb00000
+#define QIXIS_BASE_PHYS QIXIS_BASE
+#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
+#define QIXIS_LBMAP_SWITCH 2
+#define QIXIS_LBMAP_MASK 0xe0
+#define QIXIS_LBMAP_SHIFT 0x5
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x00
+#define QIXIS_LBMAP_SD 0x00
+#define QIXIS_LBMAP_EMMC 0x00
+#define QIXIS_LBMAP_QSPI 0x00
+#define QIXIS_RCW_SRC_SD 0xf8
+#define QIXIS_RCW_SRC_EMMC 0xf9
+#define QIXIS_RCW_SRC_QSPI 0xff
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x11
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RST_FORCE_MEM 0x01
+
+#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
+#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+ CSPR_PORT_SIZE_8 | \
+ CSPR_MSEL_GPCM | \
+ CSPR_V)
+#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+ CSOR_NOR_NOR_MODE_AVD_NOR | \
+ CSOR_NOR_TRHZ_80)
+#endif
+
+/* SATA */
+#ifndef CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT2
+#endif
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#define SCSI_VEND_ID 0x1b4b
+#define SCSI_DEV_ID 0x9170
+#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
+
+#endif /* __LS1028A_RDB_H */
generated by cgit (git 2.34.1) at 2024-12-23 05:57:42 +0000