diff options
| -rw-r--r-- | drivers/misc/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/rockchip-efuse.c | 161 |
3 files changed, 175 insertions, 0 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index ecca159d14..92f348f409 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -20,6 +20,19 @@ config ALTERA_SYSID Select this to enable a sysid for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera. +config ROCKCHIP_EFUSE + bool "Rockchip e-fuse support" + depends on MISC + help + Enable (read-only) access for the e-fuse block found in Rockchip + SoCs: accesses can either be made using byte addressing and a length + or through child-nodes that are generated based on the e-fuse map + retrieved from the DTS. + + This driver currently supports the RK3399 only, but can easily be + extended (by porting the read function from the Linux kernel sources) + to support other recent Rockchip devices. + config CMD_CROS_EC bool "Enable crosec command" depends on CROS_EC diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 4543cd647e..ea64677c33 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -50,3 +50,4 @@ obj-$(CONFIG_PCA9551_LED) += pca9551_led.o obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o obj-$(CONFIG_QFW) += qfw.o +obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o diff --git a/drivers/misc/rockchip-efuse.c b/drivers/misc/rockchip-efuse.c new file mode 100644 index 0000000000..423d24c26e --- /dev/null +++ b/drivers/misc/rockchip-efuse.c @@ -0,0 +1,161 @@ +/* + * eFuse driver for Rockchip devices + * + * Copyright 2017, Theobroma Systems Design und Consulting GmbH + * Written by Philipp Tomsich <philipp.tomsich@theobroma-systems.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <command.h> +#include <display_options.h> +#include <dm.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <misc.h> + +#define RK3399_A_SHIFT 16 +#define RK3399_A_MASK 0x3ff +#define RK3399_NFUSES 32 +#define RK3399_BYTES_PER_FUSE 4 +#define RK3399_STROBSFTSEL BIT(9) +#define RK3399_RSB BIT(7) +#define RK3399_PD BIT(5) +#define RK3399_PGENB BIT(3) +#define RK3399_LOAD BIT(2) +#define RK3399_STROBE BIT(1) +#define RK3399_CSB BIT(0) + +struct rockchip_efuse_regs { + u32 ctrl; /* 0x00 efuse control register */ + u32 dout; /* 0x04 efuse data out register */ + u32 rf; /* 0x08 efuse redundancy bit used register */ + u32 _rsvd0; + u32 jtag_pass; /* 0x10 JTAG password */ + u32 strobe_finish_ctrl; + /* 0x14 efuse strobe finish control register */ +}; + +struct rockchip_efuse_platdata { + void __iomem *base; + struct clk *clk; +}; + +#if defined(DEBUG) +static int dump_efuses(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + /* + * N.B.: This function is tailored towards the RK3399 and assumes that + * there's always 32 fuses x 32 bits (i.e. 128 bytes of data) to + * be read. + */ + + struct udevice *dev; + u8 fuses[128]; + int ret; + + /* retrieve the device */ + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_GET_DRIVER(rockchip_efuse), &dev); + if (ret) { + printf("%s: no misc-device found\n", __func__); + return 0; + } + + ret = misc_read(dev, 0, &fuses, sizeof(fuses)); + if (ret) { + printf("%s: misc_read failed\n", __func__); + return 0; + } + + printf("efuse-contents:\n"); + print_buffer(0, fuses, 1, 128, 16); + + return 0; +} + +U_BOOT_CMD( + rk3399_dump_efuses, 1, 1, dump_efuses, + "Dump the content of the efuses", + "" +); +#endif + +static int rockchip_rk3399_efuse_read(struct udevice *dev, int offset, + void *buf, int size) +{ + struct rockchip_efuse_platdata *plat = dev_get_platdata(dev); + struct rockchip_efuse_regs *efuse = + (struct rockchip_efuse_regs *)plat->base; + + unsigned int addr_start, addr_end, addr_offset; + u32 out_value; + u8 bytes[RK3399_NFUSES * RK3399_BYTES_PER_FUSE]; + int i = 0; + u32 addr; + + addr_start = offset / RK3399_BYTES_PER_FUSE; + addr_offset = offset % RK3399_BYTES_PER_FUSE; + addr_end = DIV_ROUND_UP(offset + size, RK3399_BYTES_PER_FUSE); + + /* cap to the size of the efuse block */ + if (addr_end > RK3399_NFUSES) + addr_end = RK3399_NFUSES; + + writel(RK3399_LOAD | RK3399_PGENB | RK3399_STROBSFTSEL | RK3399_RSB, + &efuse->ctrl); + udelay(1); + for (addr = addr_start; addr < addr_end; addr++) { + setbits_le32(&efuse->ctrl, + RK3399_STROBE | (addr << RK3399_A_SHIFT)); + udelay(1); + out_value = readl(&efuse->dout); + clrbits_le32(&efuse->ctrl, RK3399_STROBE); + udelay(1); + + memcpy(&bytes[i], &out_value, RK3399_BYTES_PER_FUSE); + i += RK3399_BYTES_PER_FUSE; + } + + /* Switch to standby mode */ + writel(RK3399_PD | RK3399_CSB, &efuse->ctrl); + + memcpy(buf, bytes + addr_offset, size); + + return 0; +} + +static int rockchip_efuse_read(struct udevice *dev, int offset, + void *buf, int size) +{ + return rockchip_rk3399_efuse_read(dev, offset, buf, size); +} + +static const struct misc_ops rockchip_efuse_ops = { + .read = rockchip_efuse_read, +}; + +static int rockchip_efuse_ofdata_to_platdata(struct udevice *dev) +{ + struct rockchip_efuse_platdata *plat = dev_get_platdata(dev); + + plat->base = (void *)devfdt_get_addr(dev); + return 0; +} + +static const struct udevice_id rockchip_efuse_ids[] = { + { .compatible = "rockchip,rk3399-efuse" }, + {} +}; + +U_BOOT_DRIVER(rockchip_efuse) = { + .name = "rockchip_efuse", + .id = UCLASS_MISC, + .of_match = rockchip_efuse_ids, + .ofdata_to_platdata = rockchip_efuse_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct rockchip_efuse_platdata), + .ops = &rockchip_efuse_ops, +}; |