diff options
| -rw-r--r-- | drivers/bios_emulator/atibios.c | 198 | ||||
| -rw-r--r-- | drivers/bios_emulator/besys.c | 4 | ||||
| -rw-r--r-- | include/bios_emul.h | 8 |
3 files changed, 152 insertions, 58 deletions
diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c index 3b2ed6e109..93b815ccb4 100644 --- a/drivers/bios_emulator/atibios.c +++ b/drivers/bios_emulator/atibios.c @@ -46,8 +46,11 @@ * BIOS in u-boot. ****************************************************************************/ #include <common.h> -#include "biosemui.h" +#include <bios_emul.h> +#include <errno.h> #include <malloc.h> +#include <vbe.h> +#include "biosemui.h" /* Length of the BIOS image */ #define MAX_BIOSLEN (128 * 1024L) @@ -59,17 +62,54 @@ static u32 saveBaseAddress14; static u32 saveBaseAddress18; static u32 saveBaseAddress20; +static void atibios_set_vesa_mode(RMREGS *regs, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + debug("VBE: Setting VESA mode %#04x\n", vesa_mode); + /* request linear framebuffer mode */ + vesa_mode |= (1 << 14); + /* request clearing of framebuffer */ + vesa_mode &= ~(1 << 15); + regs->e.eax = VESA_SET_MODE; + regs->e.ebx = vesa_mode; + BE_int86(0x10, regs, regs); + + int offset = 0x2000; + void *buffer = (void *)(M.mem_base + offset); + + u16 buffer_seg = (((unsigned long)offset) >> 4) & 0xff00; + u16 buffer_adr = ((unsigned long)offset) & 0xffff; + regs->e.eax = VESA_GET_MODE_INFO; + regs->e.ebx = 0; + regs->e.ecx = vesa_mode; + regs->e.edx = 0; + regs->e.esi = buffer_seg; + regs->e.edi = buffer_adr; + BE_int86(0x10, regs, regs); + memcpy(mode_info->mode_info_block, buffer, + sizeof(struct vbe_mode_info)); + mode_info->valid = true; + + vesa_mode |= (1 << 14); + /* request clearing of framebuffer */ + vesa_mode &= ~(1 << 15); + regs->e.eax = VESA_SET_MODE; + regs->e.ebx = vesa_mode; + BE_int86(0x10, regs, regs); +} + /**************************************************************************** PARAMETERS: pcidev - PCI device info for the video card on the bus to boot -VGAInfo - BIOS emulator VGA info structure +vga_info - BIOS emulator VGA info structure REMARKS: This function executes the BIOS POST code on the controller. We assume that at this stage the controller has its I/O and memory space enabled and that all other controllers are in a disabled state. ****************************************************************************/ -static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, + int vesa_mode, struct vbe_mode_info *mode_info) { RMREGS regs; RMSREGS sregs; @@ -84,13 +124,16 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev); /*Setup the X86 emulator for the VGA BIOS*/ - BE_setVGA(VGAInfo); + BE_setVGA(vga_info); /*Execute the BIOS POST code*/ BE_callRealMode(0xC000, 0x0003, ®s, &sregs); /*Cleanup and exit*/ - BE_getVGA(VGAInfo); + BE_getVGA(vga_info); + + if (vesa_mode != -1) + atibios_set_vesa_mode(®s, vesa_mode, mode_info); } /**************************************************************************** @@ -244,60 +287,61 @@ REMARKS: Loads and POST's the display controllers BIOS, directly from the BIOS image we can extract over the PCI bus. ****************************************************************************/ -static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int vesa_mode, + struct vbe_mode_info *mode_info) { - u32 BIOSImageLen; - uchar *mappedBIOS; - uchar *copyOfBIOS; - - /*Allocate memory to store copy of BIOS from display controller*/ - if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) { - printf("videoboot: Video ROM failed to map!\n"); - return false; - } + u32 bios_image_len; + uchar *mapped_bios; + uchar *copy_of_bios; + + if (bios_rom) { + copy_of_bios = bios_rom; + bios_image_len = bios_len; + } else { + /* + * Allocate memory to store copy of BIOS from display + * controller + */ + mapped_bios = PCI_mapBIOSImage(pcidev); + if (mapped_bios == NULL) { + printf("videoboot: Video ROM failed to map!\n"); + return false; + } - BIOSImageLen = mappedBIOS[2] * 512; + bios_image_len = mapped_bios[2] * 512; - if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) { - printf("videoboot: Out of memory!\n"); - return false; + copy_of_bios = malloc(bios_image_len); + if (copy_of_bios == NULL) { + printf("videoboot: Out of memory!\n"); + return false; + } + memcpy(copy_of_bios, mapped_bios, bios_image_len); + PCI_unmapBIOSImage(pcidev, mapped_bios); } - memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen); - PCI_unmapBIOSImage(pcidev, mappedBIOS); - - /*Save information in VGAInfo structure*/ - VGAInfo->function = PCI_FUNC(pcidev); - VGAInfo->device = PCI_DEV(pcidev); - VGAInfo->bus = PCI_BUS(pcidev); - VGAInfo->pcidev = pcidev; - VGAInfo->BIOSImage = copyOfBIOS; - VGAInfo->BIOSImageLen = BIOSImageLen; + /*Save information in vga_info structure*/ + vga_info->function = PCI_FUNC(pcidev); + vga_info->device = PCI_DEV(pcidev); + vga_info->bus = PCI_BUS(pcidev); + vga_info->pcidev = pcidev; + vga_info->BIOSImage = copy_of_bios; + vga_info->BIOSImageLen = bios_image_len; /*Now execute the BIOS POST for the device*/ - if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) { + if (copy_of_bios[0] != 0x55 || copy_of_bios[1] != 0xAA) { printf("videoboot: Video ROM image is invalid!\n"); return false; } - PCI_doBIOSPOST(pcidev, VGAInfo); + PCI_doBIOSPOST(pcidev, vga_info, vesa_mode, mode_info); /*Reset the size of the BIOS image to the final size*/ - VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512; + vga_info->BIOSImageLen = copy_of_bios[2] * 512; return true; } -/**************************************************************************** -PARAMETERS: -pcidev - PCI device info for the video card on the bus to boot -pVGAInfo - Place to return VGA info structure is requested -cleanUp - true to clean up on exit, false to leave emulator active - -REMARKS: -Boots the PCI/AGP video card on the bus using the Video ROM BIOS image -and the X86 BIOS emulator module. -****************************************************************************/ -int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) +int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop) { BE_VGAInfo *VGAInfo; @@ -307,28 +351,70 @@ int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) /*Initialise the x86 BIOS emulator*/ if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) { printf("videoboot: Out of memory!\n"); - return false; + return -ENOMEM; } memset(VGAInfo, 0, sizeof(*VGAInfo)); BE_init(0, 65536, VGAInfo, 0); + *vga_infop = VGAInfo; - /*Post all the display controller BIOS'es*/ - if (!PCI_postController(pcidev, VGAInfo)) - return false; + return 0; +} - /*Cleanup and exit the emulator if requested. If the BIOS emulator - is needed after booting the card, we will not call BE_exit and - leave it enabled for further use (ie: VESA driver etc). +void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)) +{ + X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func); +} + +int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + /*Post all the display controller BIOS'es*/ + if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info, + vesa_mode, mode_info)) + return -EINVAL; + + /* + * Cleanup and exit the emulator if requested. If the BIOS emulator + * is needed after booting the card, we will not call BE_exit and + * leave it enabled for further use (ie: VESA driver etc). */ - if (cleanUp) { + if (clean_up) { BE_exit(); - if (VGAInfo->BIOSImage) - free(VGAInfo->BIOSImage); - free(VGAInfo); - VGAInfo = NULL; + if (vga_info->BIOSImage) + free(vga_info->BIOSImage); + free(vga_info); + vga_info = NULL; } - /*Return VGA info pointer if the caller requested it*/ + + return 0; +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus to boot +pVGAInfo - Place to return VGA info structure is requested +cleanUp - true to clean up on exit, false to leave emulator active + +REMARKS: +Boots the PCI/AGP video card on the bus using the Video ROM BIOS image +and the X86 BIOS emulator module. +****************************************************************************/ +int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up) +{ + BE_VGAInfo *VGAInfo; + int ret; + + ret = biosemu_setup(pcidev, &VGAInfo); + if (ret) + return false; + ret = biosemu_run(pcidev, NULL, 0, VGAInfo, clean_up, -1, NULL); + if (ret) + return false; + + /* Return VGA info pointer if the caller requested it*/ if (pVGAInfo) *pVGAInfo = VGAInfo; + return true; } diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c index 70c472a16b..8e29a9eafe 100644 --- a/drivers/bios_emulator/besys.c +++ b/drivers/bios_emulator/besys.c @@ -713,9 +713,9 @@ through to the real hardware if we don't need to special case it. void X86API BE_outl(X86EMU_pioAddr port, u32 val) { #if !defined(CONFIG_X86EMU_RAW_IO) - if (IS_PCI_PORT(port)) + if (IS_PCI_PORT(port)) { PCI_outp(port, val, REG_WRITE_DWORD); - else if (port < 0x100) { + } else if (port < 0x100) { DB(printf("WARN: INVALID outl.%04X <- %08X\n", (u16) port,val);) LOG_outpd(port, val); } else diff --git a/include/bios_emul.h b/include/bios_emul.h index f4c4d1d443..3643b82b3a 100644 --- a/include/bios_emul.h +++ b/include/bios_emul.h @@ -55,4 +55,12 @@ void bios_run_on_x86(pci_dev_t pcidev, unsigned long addr, int vesa_mode, */ void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void)); +void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)); + +int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo); + +int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info); + #endif |