diff options
-rw-r--r-- | arch/arm/dts/imx7d-pico.dtsi | 4 | ||||
-rw-r--r-- | board/technexion/pico-imx7d/pico-imx7d.c | 38 | ||||
-rw-r--r-- | board/technexion/pico-imx7d/spl.c | 38 | ||||
-rw-r--r-- | configs/pico-hobbit-imx7d_defconfig | 1 | ||||
-rw-r--r-- | configs/pico-imx7d_defconfig | 1 | ||||
-rw-r--r-- | configs/pico-pi-imx7d_defconfig | 1 |
6 files changed, 45 insertions, 38 deletions
diff --git a/arch/arm/dts/imx7d-pico.dtsi b/arch/arm/dts/imx7d-pico.dtsi index d1a4079570..9f1fe683db 100644 --- a/arch/arm/dts/imx7d-pico.dtsi +++ b/arch/arm/dts/imx7d-pico.dtsi @@ -8,6 +8,10 @@ / { + aliases { + mmc0 = &usdhc3; + }; + /* Will be filled by the bootloader */ memory@80000000 { device_type = "memory"; diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 3b9be45587..e63b19df6e 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -13,10 +13,8 @@ #include <asm/mach-imx/mxc_i2c.h> #include <asm/io.h> #include <common.h> -#include <fsl_esdhc.h> #include <i2c.h> #include <miiphy.h> -#include <mmc.h> #include <netdev.h> #include <usb.h> #include <power/pmic.h> @@ -28,9 +26,6 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) - #define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) #define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) @@ -126,20 +121,6 @@ static iomux_v3_cfg_t const uart5_pads[] = { MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { - MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - #ifdef CONFIG_FEC_MXC static iomux_v3_cfg_t const fec1_pads[] = { MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), @@ -224,25 +205,6 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); } -static struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC3_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - /* Assume uSDHC3 emmc is always present */ - return 1; -} - -int board_mmc_init(bd_t *bis) -{ - imx_iomux_v3_setup_multiple_pads( - usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -} - int board_early_init_f(void) { setup_iomux_uart(); diff --git a/board/technexion/pico-imx7d/spl.c b/board/technexion/pico-imx7d/spl.c index 8c3443875d..92a46463db 100644 --- a/board/technexion/pico-imx7d/spl.c +++ b/board/technexion/pico-imx7d/spl.c @@ -5,11 +5,15 @@ * Author: Richard Hu <richard.hu@technexion.com> */ +#include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> +#include <asm/arch/mx7-pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch-mx7/mx7-ddr.h> +#include <asm/mach-imx/iomux-v3.h> #include <asm/gpio.h> +#include <fsl_esdhc.h> #include <spl.h> #if defined(CONFIG_SPL_BUILD) @@ -119,4 +123,38 @@ void board_init_f(ulong dummy) void reset_cpu(ulong addr) { } + +#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ + PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static struct fsl_esdhc_cfg usdhc_cfg[1] = { + {USDHC3_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + /* Assume uSDHC3 emmc is always present */ + return 1; +} + +int board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} #endif diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig index 8738f0bc29..c75532e9a6 100644 --- a/configs/pico-hobbit-imx7d_defconfig +++ b/configs/pico-hobbit-imx7d_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y +CONFIG_DM_MMC=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig index 54d7da8768..818032ef18 100644 --- a/configs/pico-imx7d_defconfig +++ b/configs/pico-imx7d_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_BOOTMENU=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7=y CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_DFU=y diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig index 662492aae1..926e70e9f6 100644 --- a/configs/pico-pi-imx7d_defconfig +++ b/configs/pico-pi-imx7d_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y +CONFIG_DM_MMC=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y |