diff options
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr2.c | 44 |
1 files changed, 0 insertions, 44 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 2475ed95ec..3ac2cdcf7f 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -111,8 +111,6 @@ #define NUMMEMWORDS 8 #define NUMLOOPS 64 /* memory test loops */ -#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */ - /* * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory * region. Right now the cache should still be disabled in U-Boot because of the @@ -2268,39 +2266,6 @@ static void program_ecc(unsigned long *dimm_populated, return; } -#ifdef CONFIG_ECC_ERROR_RESET -/* - * Check for ECC errors and reset board upon any error here - * - * On the Katmai 440SPe eval board, from time to time, the first - * lword write access after DDR2 initializazion with ECC checking - * enabled, leads to an ECC error. I couldn't find a configuration - * without this happening. On my board with the current setup it - * happens about 1 from 10 times. - * - * The ECC modules used for testing are: - * - Kingston ValueRAM KVR667D2E5/512 (tested with 1 and 2 DIMM's) - * - * This has to get fixed for the Katmai and tested for the other - * board (440SP/440SPe) that will eventually use this code in the - * future. - * - * 2007-03-01, sr - */ -static void check_ecc(void) -{ - u32 val; - - mfsdram(SDRAM_ECCCR, val); - if (val != 0) { - printf("\nECC error: MCIF0_ECCES=%08lx MQ0_ESL=%08lx address=%08lx\n", - val, mfdcr(0x4c), mfdcr(0x4e)); - printf("ECC error occured, resetting board...\n"); - do_reset(NULL, 0, 0, NULL); - } -} -#endif - static void wait_ddr_idle(void) { u32 val; @@ -2375,15 +2340,6 @@ static void program_ecc_addr(unsigned long start_address, sync(); eieio(); wait_ddr_idle(); - -#ifdef CONFIG_ECC_ERROR_RESET - /* - * One write to 0 is enough to trigger this ECC error - * (see description above) - */ - out_be32(0, 0x12345678); - check_ecc(); -#endif } } #endif |