diff options
-rw-r--r-- | arch/arm/Kconfig | 5 | ||||
-rw-r--r-- | board/siemens/common/board.c | 4 | ||||
-rw-r--r-- | board/siemens/draco/Kconfig | 16 | ||||
-rw-r--r-- | board/siemens/draco/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/siemens/draco/board.c | 39 | ||||
-rw-r--r-- | board/siemens/draco/mux.c | 2 | ||||
-rw-r--r-- | configs/etamin_defconfig | 18 | ||||
-rw-r--r-- | include/configs/draco.h | 1 | ||||
-rw-r--r-- | include/configs/etamin.h | 257 | ||||
-rw-r--r-- | include/configs/pxm2.h | 1 | ||||
-rw-r--r-- | include/configs/rastaban.h | 1 | ||||
-rw-r--r-- | include/configs/rut.h | 1 | ||||
-rw-r--r-- | include/configs/siemens-am33x-common.h | 5 | ||||
-rw-r--r-- | include/configs/thuban.h | 1 |
14 files changed, 348 insertions, 4 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 26ccf62829..e75c4c0fa6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -361,6 +361,11 @@ config TARGET_RASTABAN select CPU_V7 select SUPPORT_SPL +config TARGET_ETAMIN + bool "Support etamin" + select CPU_V7 + select SUPPORT_SPL + config TARGET_PXM2 bool "Support pxm2" select CPU_V7 diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index c127f6ca27..9cafcea53a 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -83,8 +83,12 @@ int board_init(void) #ifdef CONFIG_FACTORYSET factoryset_read_eeprom(CONFIG_SYS_I2C_EEPROM_ADDR); #endif + gpmc_init(); +#ifdef CONFIG_NAND_CS_INIT + board_nand_cs_init(); +#endif #ifdef CONFIG_VIDEO board_video_init(); #endif diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig index 819d187087..a699c7d46f 100644 --- a/board/siemens/draco/Kconfig +++ b/board/siemens/draco/Kconfig @@ -45,3 +45,19 @@ config SYS_CONFIG_NAME default "rastaban" endif + +if TARGET_ETAMIN + +config SYS_BOARD + default "draco" + +config SYS_VENDOR + default "siemens" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "etamin" + +endif diff --git a/board/siemens/draco/MAINTAINERS b/board/siemens/draco/MAINTAINERS index 484dd739c1..e9107f08bf 100644 --- a/board/siemens/draco/MAINTAINERS +++ b/board/siemens/draco/MAINTAINERS @@ -4,6 +4,7 @@ S: Maintained F: board/siemens/draco/ F: include/configs/draco.h F: configs/draco_defconfig +F: configs/etamin_defconfig F: include/configs/thuban.h F: configs/thuban_defconfig F: include/configs/rastaban.h diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index 41bdef0f6b..d8869a09dd 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -24,6 +24,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> #include <asm/io.h> #include <asm/emif.h> #include <asm/gpio.h> @@ -33,6 +34,7 @@ #include <watchdog.h> #include "board.h" #include "../common/factoryset.h" +#include <nand.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,6 +42,7 @@ DECLARE_GLOBAL_DATA_PTR; static struct draco_baseboard_id __attribute__((section(".data"))) settings; #if DDR_PLL_FREQ == 303 +#if !defined(CONFIG_TARGET_ETAMIN) /* Default@303MHz-i0 */ const struct ddr3_data ddr3_default = { 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F, @@ -48,6 +51,16 @@ const struct ddr3_data ddr3_default = { "default name @303MHz \0", "default marking \0", }; +#else +/* etamin board */ +const struct ddr3_data ddr3_default = { + 0x33524444, 0x56312e36, 0x0080, 0x0000, 0x003A, 0x0010, 0x009F, + 0x0050, 0x0888A39B, 0x266D7FDA, 0x501F86AF, 0x00100206, 0x61A44BB2, + 0x0000093B, 0x0000018A, + "test-etamin \0", + "generic-8Gbit \0", +}; +#endif #elif DDR_PLL_FREQ == 400 /* Default@400MHz-i0 */ const struct ddr3_data ddr3_default = { @@ -210,6 +223,7 @@ struct ctrl_ioregs draco_ddr3_ioregs = { draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = settings.ddr3.emif_ddr_phy_ctlr_1; draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; + draco_ddr3_emif_reg_data.sdram_config2 = 0x08000000; draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; @@ -251,6 +265,10 @@ int board_late_init(void) nand_curr_device = 0; omap_nand_switch_ecc(1, ecc_type); +#ifdef CONFIG_TARGET_ETAMIN + nand_curr_device = 1; + omap_nand_switch_ecc(1, ecc_type); +#endif #ifdef CONFIG_FACTORYSET /* Set ASN in environment*/ if (factory_dat.asn[0] != 0) { @@ -326,7 +344,7 @@ int board_eth_init(bd_t *bis) } static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc, - char *const argv[]) + char *const argv[]) { /* Reset SMSC LAN9303 switch for default configuration */ gpio_request(GPIO_LAN9303_NRST, "nRST"); @@ -346,4 +364,23 @@ U_BOOT_CMD( #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ +#ifdef CONFIG_NAND_CS_INIT +/* GPMC definitions for second nand cs1 */ +static const u32 gpmc_nand_config[] = { + ETAMIN_NAND_GPMC_CONFIG1, + ETAMIN_NAND_GPMC_CONFIG2, + ETAMIN_NAND_GPMC_CONFIG3, + ETAMIN_NAND_GPMC_CONFIG4, + ETAMIN_NAND_GPMC_CONFIG5, + ETAMIN_NAND_GPMC_CONFIG6, + /*CONFIG7- computed as params */ +}; + +static void board_nand_cs_init(void) +{ + enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1], + 0x18000000, GPMC_SIZE_16M); +} +#endif + #include "../common/board.c" diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c index dbcc80b61f..38a484eb43 100644 --- a/board/siemens/draco/mux.c +++ b/board/siemens/draco/mux.c @@ -51,6 +51,7 @@ static struct module_pin_mux nand_pin_mux[] = { {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_csn1), MODE(0) | PULLUDEN | PULLUP_EN}, /* NAND_CS1 */ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ @@ -68,7 +69,6 @@ static struct module_pin_mux gpios_pin_mux[] = { {OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y3 GPIO2_28*/ {OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE}, /* Y7 GPIO2_27*/ /* Triacs initial HW Rev */ - {OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_30 Y0 */ {OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_28 Y1 */ {OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS}, /* 1_31 Y2 */ {OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS}, /* 0_11 Y3 */ diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig new file mode 100644 index 0000000000..6c747df66b --- /dev/null +++ b/configs/etamin_defconfig @@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_TARGET_ETAMIN=y +CONFIG_SPL=y +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" +CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_OF_LIBFDT=y diff --git a/include/configs/draco.h b/include/configs/draco.h index 5d866c4868..889178c283 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -73,6 +73,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=draco\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ diff --git a/include/configs/etamin.h b/include/configs/etamin.h new file mode 100644 index 0000000000..4919cfe353 --- /dev/null +++ b/include/configs/etamin.h @@ -0,0 +1,257 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ETAMIN_H +#define __CONFIG_ETAMIN_H + +#include "siemens-am33x-common.h" +/* NAND specific changes for etamin due to different page size */ +#undef CONFIG_SYS_NAND_PAGE_SIZE +#undef CONFIG_SYS_NAND_OOBSIZE +#undef CONFIG_SYS_NAND_BLOCK_SIZE +#undef CONFIG_SYS_NAND_ECCPOS +#undef CONFIG_SYS_NAND_U_BOOT_OFFS +#undef CONFIG_SYS_ENV_SECT_SIZE +#undef CONFIG_ENV_OFFSET +#undef CONFIG_NAND_OMAP_ECCSCHEME +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW + +#define CONFIG_ENV_OFFSET 0x980000 +#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_NAND_PAGE_SIZE 4096 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ + 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ + 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ + 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ + 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ + 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ + 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ + 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ + } + +#undef CONFIG_SYS_NAND_ECCSIZE +#undef CONFIG_SYS_NAND_ECCBYTES +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 26 + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 + +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +#undef CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_MAX_NAND_DEVICE 3 +#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */ +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ + CONFIG_SYS_NAND_BASE2} + +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +/* FWD Button = 27 + * SRV Button = 87 */ +#define BOARD_DFU_BUTTON_GPIO 27 +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ +/* In dfu mode keep led1 on */ +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "button_dfu1=87\0" \ + "led0=3,0,1\0" \ + "led1=4,0,0\0" \ + "led2=5,0,1\0" \ + "led3=87,0,1\0" \ + "led4=60,0,1\0" \ + "led5=63,0,1\0" + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + +#define CONFIG_BOARD_LATE_INIT + +/* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* use both define to compile a SPL compliance test */ +/* +#define CONFIG_SPL_CMT +#define CONFIG_SPL_CMT_DEBUG +*/ + +/* nedded by compliance test in read mode */ +#if defined(CONFIG_SPL_CMT) +#define CONFIG_SYS_DCACHE_OFF +#endif + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0xB80000 +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + + +#define CONFIG_DFU_MTD +#undef COMMON_ENV_DFU_ARGS +#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ + "setenv bootargs ${bootargs};" \ + "mtdparts default;" \ + "draco_led 1;" \ + "dfu 0 mtd 0;" \ + "draco_led 0;\0" \ + +#undef DFU_ALT_INFO_NAND_V2 +#define DFU_ALT_INFO_NAND_V2 \ + "spl mtddev;" \ + "spl.backup1 mtddev;" \ + "spl.backup2 mtddev;" \ + "spl.backup3 mtddev;" \ + "u-boot mtddev;" \ + "u-boot.env0 mtddev;" \ + "u-boot.env1 mtddev;" \ + "rootfs mtddevubi" \ + +#undef MTDIDS_NAME_STR +#define MTDIDS_NAME_STR "omap2-nand_concat" +#undef MTDIDS_DEFAULT +#define MTDIDS_DEFAULT "nand2=" MTDIDS_NAME_STR + +#undef MTDPARTS_DEFAULT_V2 +#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ + "512k(spl)," \ + "512k(spl.backup1)," \ + "512k(spl.backup2)," \ + "512k(spl.backup3)," \ + "7680k(u-boot)," \ + "2048k(u-boot.env0)," \ + "2048k(u-boot.env1)," \ + "2048k(mtdoops)," \ + "-(rootfs)" + +#undef MTDPARTS_DEFAULT +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + +#undef CONFIG_ENV_SETTINGS_NAND_V2 +#define CONFIG_ENV_SETTINGS_NAND_V2 \ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ + "fi;" \ + "if test -n ${B}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ + "fi;" \ + "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ + "ubi.mtd=rootfs,${ubi_off};" \ + "setenv bootargs ${bootargs} " \ + "root=${nand_root} noinitrd ${mtdparts} " \ + "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ + "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ + "=mtdoops\0" \ + COMMON_ENV_DFU_ARGS \ + "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ + COMMON_ENV_NAND_BOOT \ + "ubi part rootfs ${ubi_off};" \ + "ubifsmount ubi0:${nand_active_ubi_vol};" \ + "ubifsload ${kloadaddr} boot/${kernel_name};" \ + "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + COMMON_ENV_NAND_CMDS + +#ifndef CONFIG_SPL_BUILD + +#define CONFIG_NAND_CS_INIT +#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 +#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 +#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e +#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 +#define CONFIG_MTD_CONCAT + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=etamin\0" \ + "ubi_off=4096\0"\ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 + +#ifndef CONFIG_RESTORE_FLASH + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"run nand_boot_backup;" \ +"reset;" + + +#else +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_ETAMIN_H */ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 794650a51c..990fd84b32 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -61,6 +61,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=pxm2\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x500000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 6c8681ab4a..55be46bcf2 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -76,6 +76,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rastaban\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ diff --git a/include/configs/rut.h b/include/configs/rut.h index b0dcbd8c5a..aea8e217d0 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -56,6 +56,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rut\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x500000\0" \ "splashpos=m,m\0" \ "optargs=fixrtc --no-log consoleblank=0 \0" \ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index ae26dad4aa..5969541de6 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -159,6 +159,7 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) @@ -421,7 +422,7 @@ "setenv nand_src_addr ${nand_src_addr_B};" \ "fi;" \ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ - "ubi.mtd=9,2048;" \ + "ubi.mtd=9,${ubi_off};" \ "setenv bootargs ${bootargs} " \ "root=${nand_root} noinitrd ${mtdparts} " \ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ @@ -513,7 +514,7 @@ COMMON_ENV_DFU_ARGS \ "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ COMMON_ENV_NAND_BOOT \ - "ubi part rootfs 2048;" \ + "ubi part rootfs ${ubi_off};" \ "ubifsmount ubi0:${nand_active_ubi_vol};" \ "ubifsload ${kloadaddr} boot/${kernel_name};" \ "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ diff --git a/include/configs/thuban.h b/include/configs/thuban.h index a03f87c2fb..25ac2cba4b 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -69,6 +69,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=thuban\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ |