diff options
| -rw-r--r-- | board/freescale/common/ics307_clk.c | 69 | ||||
| -rw-r--r-- | board/freescale/common/ics307_clk.h | 4 | ||||
| -rw-r--r-- | board/freescale/common/ngpixis.c | 27 |
3 files changed, 99 insertions, 1 deletions
diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 89d8810f74..6acbc361a3 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -31,12 +31,81 @@ #include "pixis.h" #endif +/* define for SYS CLK or CLK1Frequency */ +#define TTL 1 +#define CLK2 0 +#define CRYSTAL 0 +#define MAX_VDW (511 + 8) +#define MAX_RDW (127 + 2) +#define MIN_VDW (4 + 8) +#define MIN_RDW (1 + 2) +#define NUM_OD_SETTING 8 +/* + * These defines cover the industrial temperature range part, + * for commercial, change below to 400000 and 55000, respectively + */ +#define MAX_VCO 360000 +#define MIN_VCO 60000 + /* decode S[0-2] to Output Divider (OD) */ static u8 ics307_s_to_od[] = { 10, 2, 8, 4, 5, 7, 3, 6 }; /* + * Find one solution to generate required frequency for SYSCLK + * out_freq: KHz, required frequency to the SYSCLK + * the result will be retuned with component RDW, VDW, OD, TTL, + * CLK2 and crystal + */ +unsigned long ics307_sysclk_calculator(unsigned long out_freq) +{ + const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ; + unsigned long vdw, rdw, odp, s_vdw = 0, s_rdw = 0, s_odp = 0, od; + unsigned long tmp_out, diff, result = 0; + int found = 0; + + for (odp = 0; odp < NUM_OD_SETTING; odp++) { + od = ics307_s_to_od[odp]; + if (od * out_freq < MIN_VCO || od * out_freq > MAX_VCO) + continue; + for (rdw = MIN_RDW; rdw <= MAX_RDW; rdw++) { + /* Calculate the VDW */ + vdw = out_freq * 1000 * od * rdw / (input_freq * 2); + if (vdw > MAX_VDW) + vdw = MAX_VDW; + if (vdw < MIN_VDW) + continue; + /* Calculate the temp out frequency */ + tmp_out = input_freq * 2 * vdw / (rdw * od * 1000); + diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out); + /* + * calculate the percent, the precision is 1/1000 + * If greater than 1/1000, continue + * otherwise, we think the solution is we required + */ + if (diff * 1000 / out_freq > 1) + continue; + else { + s_vdw = vdw; + s_rdw = rdw; + s_odp = odp; + found = 1; + break; + } + } + } + + if (found) + result = (s_rdw - 2) | (s_vdw - 8) << 7 | s_odp << 16 | + CLK2 << 19 | TTL << 21 | CRYSTAL << 22; + + debug("ICS307-02: RDW: %ld, VDW: %ld, OD: %d\n", s_rdw - 2, s_vdw - 8, + ics307_s_to_od[s_odp]); + return result; +} + +/* * Calculate frequency being generated by ICS307-02 clock chip based upon * the control bytes being programmed into it. */ diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h index db3dbc41f7..37579124bc 100644 --- a/board/freescale/common/ics307_clk.h +++ b/board/freescale/common/ics307_clk.h @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,8 +23,10 @@ #define __ICS_CLK_H_ 1 #ifndef __ASSEMBLY__ + extern unsigned long get_board_sys_clk(void); extern unsigned long get_board_ddr_clk(void); +extern unsigned long ics307_sysclk_calculator(unsigned long out_freq); #endif #endif /* __ICS_CLK_H_ */ diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index 765f0359bf..276ae3c5cf 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -156,9 +156,29 @@ static void pixis_dump_regs(void) } #endif +void pixis_sysclk_set(unsigned long sysclk) +{ + unsigned long freq_word; + u8 sclk0, sclk1, sclk2; + + freq_word = ics307_sysclk_calculator(sysclk); + sclk2 = freq_word & 0xff; + sclk1 = (freq_word >> 8) & 0xff; + sclk0 = (freq_word >> 16) & 0xff; + + /* set SYSCLK enable bit */ + PIXIS_WRITE(vcfgen0, 0x01); + + /* SYSCLK to required frequency */ + PIXIS_WRITE(sclk[0], sclk0); + PIXIS_WRITE(sclk[1], sclk1); + PIXIS_WRITE(sclk[2], sclk2); +} + int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned int i; + unsigned long sysclk; char *p_altbank = NULL; #ifdef DEBUG char *p_dump = NULL; @@ -182,6 +202,12 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) continue; } #endif + if (strcmp(argv[i], "sysclk") == 0) { + sysclk = simple_strtoul(argv[i + 1], NULL, 0); + i += 1; + pixis_sysclk_set(sysclk); + continue; + } unknown_param = argv[i]; } @@ -219,4 +245,5 @@ U_BOOT_CMD( #ifdef DEBUG "pixis_reset dump - display the PIXIS registers\n" #endif + "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n" ); |