summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/davinci/common/misc.c13
-rw-r--r--board/davinci/common/misc.h1
-rw-r--r--board/davinci/dvevm/dvevm.c2
-rw-r--r--board/davinci/schmoogie/schmoogie.c2
-rw-r--r--board/davinci/sffsdr/sffsdr.c2
-rw-r--r--board/davinci/sonata/sonata.c2
-rw-r--r--cpu/arm926ejs/davinci/Makefile2
-rw-r--r--cpu/arm926ejs/davinci/cpu.c131
-rw-r--r--include/asm-arm/arch-davinci/hardware.h5
-rw-r--r--include/configs/davinci_dvevm.h1
-rw-r--r--include/configs/davinci_schmoogie.h1
-rw-r--r--include/configs/davinci_sffsdr.h4
-rw-r--r--include/configs/davinci_sonata.h1
13 files changed, 138 insertions, 29 deletions
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index cfab729bbb..ffdc20b93a 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -28,6 +28,7 @@
#include <net.h>
#include <asm/arch/hardware.h>
+
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
@@ -38,18 +39,6 @@ int dram_init(void)
return(0);
}
-static int dv_get_pllm_output(uint32_t pllm)
-{
- return (pllm + 1) * (CONFIG_SYS_HZ_CLOCK / 1000000);
-}
-
-void dv_display_clk_infos(void)
-{
- printf("ARM Clock: %dMHz\n", dv_get_pllm_output(REG(PLL1_PLLM)) / 2);
- printf("DDR Clock: %dMHz\n", dv_get_pllm_output(REG(PLL2_PLLM)) /
- ((REG(PLL2_DIV2) & 0x1f) + 1) / 2);
-}
-
#ifdef CONFIG_DRIVER_TI_EMAC
/* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
index 5d29784403..316159a2f7 100644
--- a/board/davinci/common/misc.h
+++ b/board/davinci/common/misc.h
@@ -24,7 +24,6 @@
extern int eth_hw_init(void);
-void dv_display_clk_infos(void);
int dvevm_read_mac_address(uint8_t *buf);
void dv_configure_mac_address(uint8_t *rom_enetaddr);
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
index 162a5dcea8..8f386331e6 100644
--- a/board/davinci/dvevm/dvevm.c
+++ b/board/davinci/dvevm/dvevm.c
@@ -69,8 +69,6 @@ int misc_init_r(void)
uint8_t video_mode;
uint8_t eeprom_enetaddr[6];
- dv_display_clk_infos();
-
/* Read Ethernet MAC address from EEPROM if available. */
if (dvevm_read_mac_address(eeprom_enetaddr))
dv_configure_mac_address(eeprom_enetaddr);
diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c
index d6dfef5817..6e0f591335 100644
--- a/board/davinci/schmoogie/schmoogie.c
+++ b/board/davinci/schmoogie/schmoogie.c
@@ -104,8 +104,6 @@ int misc_init_r(void)
0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
};
- dv_display_clk_infos();
-
/* Set serial number from UID chip */
if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index 7d855fb836..7f4ee361bb 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -131,8 +131,6 @@ int misc_init_r(void)
/* EMIF-A CS3 configuration for FPGA. */
REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
- dv_display_clk_infos();
-
/* Configure I2C switch (PCA9543) to enable channel 0. */
i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
index 155fb549c0..a0bea05177 100644
--- a/board/davinci/sonata/sonata.c
+++ b/board/davinci/sonata/sonata.c
@@ -66,8 +66,6 @@ int misc_init_r(void)
{
uint8_t eeprom_enetaddr[6];
- dv_display_clk_infos();
-
/* Read Ethernet MAC address from EEPROM if available. */
if (dvevm_read_mac_address(eeprom_enetaddr))
dv_configure_mac_address(eeprom_enetaddr);
diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile
index 480f19f557..6eaa89c614 100644
--- a/cpu/arm926ejs/davinci/Makefile
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
-COBJS-y += timer.o psc.o
+COBJS-y += cpu.o timer.o psc.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += ether.o lxt972.o dp83848.o
diff --git a/cpu/arm926ejs/davinci/cpu.c b/cpu/arm926ejs/davinci/cpu.c
new file mode 100644
index 0000000000..29aead6f4f
--- /dev/null
+++ b/cpu/arm926ejs/davinci/cpu.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2009 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL 0x100
+#define PLLC_PLLM 0x110
+#define PLLC_PREDIV 0x114
+#define PLLC_PLLDIV1 0x118
+#define PLLC_PLLDIV2 0x11c
+#define PLLC_PLLDIV3 0x120
+#define PLLC_POSTDIV 0x128
+#define PLLC_BPDIV 0x12c
+#define PLLC_PLLDIV4 0x160
+#define PLLC_PLLDIV5 0x164
+#define PLLC_PLLDIV6 0x168
+#define PLLC_PLLDIV8 0x170
+#define PLLC_PLLDIV9 0x174
+
+#define BIT(x) (1 << (x))
+
+/* SOC-specific pll info */
+#ifdef CONFIG_SOC_DM355
+#define ARM_PLLDIV PLLC_PLLDIV1
+#define DDR_PLLDIV PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DM644X
+#define ARM_PLLDIV PLLC_PLLDIV2
+#define DSP_PLLDIV PLLC_PLLDIV1
+#define DDR_PLLDIV PLLC_PLLDIV2
+#endif
+
+#ifdef CONFIG_SOC_DM6447
+#define ARM_PLLDIV PLLC_PLLDIV2
+#define DSP_PLLDIV PLLC_PLLDIV1
+#define DDR_PLLDIV PLLC_PLLDIV1
+#endif
+
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+
+static unsigned pll_div(volatile void *pllbase, unsigned offset)
+{
+ u32 div;
+
+ div = REG(pllbase + offset);
+ return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
+}
+
+static inline unsigned pll_prediv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+ /* this register read seems to fail on pll0 */
+ if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+ return 8;
+ else
+ return pll_div(pllbase, PLLC_PREDIV);
+#endif
+ return 1;
+}
+
+static inline unsigned pll_postdiv(volatile void *pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+ return pll_div(pllbase, PLLC_POSTDIV);
+#elif defined(CONFIG_SOC_DM6446)
+ if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
+ return pll_div(pllbase, PLLC_POSTDIV);
+#endif
+ return 1;
+}
+
+static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
+{
+ volatile void *pllbase = (volatile void *) pll_addr;
+ unsigned base = CONFIG_SYS_HZ_CLOCK / 1000;
+
+ /* the PLL might be bypassed */
+ if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
+ base /= pll_prediv(pllbase);
+ base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
+ base /= pll_postdiv(pllbase);
+ }
+ return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
+}
+
+int print_cpuinfo(void)
+{
+ /* REVISIT fetch and display CPU ID and revision information
+ * too ... that will matter as more revisions appear.
+ */
+ printf("Cores: ARM %d MHz",
+ pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
+
+#ifdef DSP_PLLDIV
+ printf(", DSP %d MHz",
+ pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
+#endif
+
+ printf("\nDDR: %d MHz\n",
+ /* DDR PHY uses an x2 input clock */
+ pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
+ / 2);
+ return 0;
+}
+
+#endif
+
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
index a28cfb4ae0..99324e45c7 100644
--- a/include/asm-arm/arch-davinci/hardware.h
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -175,11 +175,6 @@ void davinci_errata_workarounds(void);
#define PSC_SILVER_BULLET (0x01c41a20)
-/* Some PLL defines */
-#define PLL1_PLLM (0x01c40910)
-#define PLL2_PLLM (0x01c40d10)
-#define PLL2_DIV2 (0x01c40d1c)
-
/* Miscellania... */
#define VBPR (0x20000020)
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 9be10f76cf..e936ba87be 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -52,6 +52,7 @@
#define DV_EVM
#define CONFIG_SYS_NAND_SMALLPAGE
#define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
/*===================*/
/* SoC Configuration */
/*===================*/
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index d5e77f8e17..6612cb3cbb 100644
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -27,6 +27,7 @@
#define SCHMOOGIE
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_SYS_USE_NAND
+#define CONFIG_DISPLAY_CPUINFO
/*===================*/
/* SoC Configuration */
/*===================*/
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index 4be5b7e488..6c1dc117de 100644
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -28,8 +28,8 @@
#define SFFSDR
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_USE_DSPLINK /* This is to prevent U-Boot from
- * powering ON the DSP. */
+#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */
+#define CONFIG_DISPLAY_CPUINFO
/* SoC Configuration */
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index a6bf8259bd..893729c6f2 100644
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -52,6 +52,7 @@
#define SONATA_BOARD
#define CONFIG_SYS_NAND_SMALLPAGE
#define CONFIG_SYS_USE_NOR
+#define CONFIG_DISPLAY_CPUINFO
/*===================*/
/* SoC Configuration */
/*===================*/
generated by cgit (git 2.34.1) at 2024-12-25 03:25:50 +0000