diff options
| -rw-r--r-- | README | 17 | ||||
| -rw-r--r-- | drivers/mtd/nand/Makefile | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/fsl_elbc_spl.c | 168 |
3 files changed, 183 insertions, 6 deletions
@@ -2727,7 +2727,8 @@ FIT uImage format: Include standard software ECC in the SPL CONFIG_SPL_NAND_SIMPLE - Support for drivers/mtd/nand/libnand.o in SPL binary + Support for NAND boot using simple NAND drivers that + expose the cmd_ctrl() interface. CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, @@ -2735,15 +2736,19 @@ FIT uImage format: CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE, CONFIG_SYS_NAND_ECCBYTES Defines the size and behavior of the NAND that SPL uses - to read U-Boot with CONFIG_SPL_NAND_SIMPLE + to read U-Boot CONFIG_SYS_NAND_U_BOOT_OFFS - Location in NAND for CONFIG_SPL_NAND_SIMPLE to read U-Boot - from. + Location in NAND to read U-Boot from + + CONFIG_SYS_NAND_U_BOOT_DST + Location in memory to load U-Boot to + + CONFIG_SYS_NAND_U_BOOT_SIZE + Size of image to load CONFIG_SYS_NAND_U_BOOT_START - Location in memory for CONFIG_SPL_NAND_SIMPLE to load U-Boot - to. + Entry point in loaded image to jump to CONFIG_SYS_NAND_HW_ECC_OOBFIRST Define this if you need to first read the OOB and then the diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index d8a2dfc398..28e52bd08e 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -78,6 +78,10 @@ COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o +else # minimal SPL drivers + +COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o + endif # drivers endif # nand diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c new file mode 100644 index 0000000000..50ff4fe93e --- /dev/null +++ b/drivers/mtd/nand/fsl_elbc_spl.c @@ -0,0 +1,168 @@ +/* + * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine + * + * (C) Copyright 2006-2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (c) 2008 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/fsl_lbc.h> +#include <nand.h> + +#define WINDOW_SIZE 8192 + +static void nand_wait(void) +{ + fsl_lbc_t *regs = LBC_BASE_ADDR; + + for (;;) { + uint32_t status = in_be32(®s->ltesr); + + if (status == 1) + return; + + if (status & 1) { + puts("read failed (ltesr)\n"); + for (;;); + } + } +} + +static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) +{ + fsl_lbc_t *regs = LBC_BASE_ADDR; + uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; + const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS; + const int block_shift = large ? 17 : 14; + const int block_size = 1 << block_shift; + const int page_size = large ? 2048 : 512; + const int bad_marker = large ? page_size + 0 : page_size + 5; + int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2; + int pos = 0; + char *dst = vdst; + + if (offs & (block_size - 1)) { + puts("bad offset\n"); + for (;;); + } + + if (large) { + fmr |= FMR_ECCM; + out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) | + (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); + out_be32(®s->fir, + (FIR_OP_CW0 << FIR_OP0_SHIFT) | + (FIR_OP_CA << FIR_OP1_SHIFT) | + (FIR_OP_PA << FIR_OP2_SHIFT) | + (FIR_OP_CW1 << FIR_OP3_SHIFT) | + (FIR_OP_RBW << FIR_OP4_SHIFT)); + } else { + out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT); + out_be32(®s->fir, + (FIR_OP_CW0 << FIR_OP0_SHIFT) | + (FIR_OP_CA << FIR_OP1_SHIFT) | + (FIR_OP_PA << FIR_OP2_SHIFT) | + (FIR_OP_RBW << FIR_OP3_SHIFT)); + } + + out_be32(®s->fbcr, 0); + clrsetbits_be32(®s->bank[0].br, BR_DECC, BR_DECC_CHK_GEN); + + while (pos < uboot_size) { + int i = 0; + out_be32(®s->fbar, offs >> block_shift); + + do { + int j; + unsigned int page_offs = (offs & (block_size - 1)) << 1; + + out_be32(®s->ltesr, ~0); + out_be32(®s->lteatr, 0); + out_be32(®s->fpar, page_offs); + out_be32(®s->fmr, fmr); + out_be32(®s->lsor, 0); + nand_wait(); + + page_offs %= WINDOW_SIZE; + + /* + * If either of the first two pages are marked bad, + * continue to the next block. + */ + if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) { + puts("skipping\n"); + offs = (offs + block_size) & ~(block_size - 1); + pos &= ~(block_size - 1); + break; + } + + for (j = 0; j < page_size; j++) + dst[pos + j] = buf[page_offs + j]; + + pos += page_size; + offs += page_size; + } while ((offs & (block_size - 1)) && (pos < uboot_size)); + } + + return 0; +} + +/* + * The main entry for NAND booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from NAND into SDRAM and starts it from there. + */ +void nand_boot(void) +{ + __attribute__((noreturn)) void (*uboot)(void); + /* + * Load U-Boot image from NAND into RAM + */ + nand_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (void *)CONFIG_SYS_NAND_U_BOOT_DST); + +#ifdef CONFIG_NAND_ENV_DST + nand_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST); + +#ifdef CONFIG_ENV_OFFSET_REDUND + nand_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); +#endif +#endif + +#ifdef CONFIG_SPL_FLUSH_IMAGE + /* + * Clean d-cache and invalidate i-cache, to + * make sure that no stale data is executed. + */ + flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); +#endif + + puts("transfering control\n"); + /* + * Jump to U-Boot image + */ + uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; + (*uboot)(); +} |