diff options
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/psci.c | 16 | ||||
| -rw-r--r-- | arch/arm/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts | 139 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/prcm.h | 2 | ||||
| -rw-r--r-- | board/sunxi/MAINTAINERS | 5 | ||||
| -rw-r--r-- | configs/orangepi_zero_plus2_h3_defconfig | 19 |
6 files changed, 177 insertions, 7 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c index 2c5d99e9ac..5b689004e8 100644 --- a/arch/arm/cpu/armv7/sunxi/psci.c +++ b/arch/arm/cpu/armv7/sunxi/psci.c @@ -75,7 +75,7 @@ static void __secure __mdelay(u32 ms) isb(); } -static void __secure clamp_release(u32 __maybe_unused *clamp) +static void __secure clamp_release(void __maybe_unused *clamp) { #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \ defined(CONFIG_MACH_SUN8I_H3) || \ @@ -90,7 +90,7 @@ static void __secure clamp_release(u32 __maybe_unused *clamp) #endif } -static void __secure clamp_set(u32 __maybe_unused *clamp) +static void __secure clamp_set(void __maybe_unused *clamp) { #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \ defined(CONFIG_MACH_SUN8I_H3) || \ @@ -99,22 +99,28 @@ static void __secure clamp_set(u32 __maybe_unused *clamp) #endif } -static void __secure sunxi_power_switch(u32 *clamp, u32 *pwroff, bool on, +static void __secure sunxi_power_switch(void *clamp, void *pwroff_ptr, bool on, int cpu) { + u32 pwroff; + + memcpy(&pwroff, pwroff_ptr, sizeof(u32)); + if (on) { /* Release power clamp */ clamp_release(clamp); /* Clear power gating */ - clrbits_le32(pwroff, BIT(cpu)); + clrbits_le32(&pwroff, BIT(cpu)); } else { /* Set power gating */ - setbits_le32(pwroff, BIT(cpu)); + setbits_le32(&pwroff, BIT(cpu)); /* Activate power clamp */ clamp_set(clamp); } + + memcpy(pwroff_ptr, &pwroff, sizeof(u32)); } #ifdef CONFIG_MACH_SUN8I_R40 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 3dc9c4d41c..88c750a646 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -522,7 +522,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb + sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v40-bananapi-m2-berry.dtb diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts new file mode 100644 index 0000000000..f2f7b7a925 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun8i-h3.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi Zero Plus2 H3"; + compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + post-power-on-delay-ms = <200>; + }; +}; + +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h index 58a36895e6..767d1ff98d 100644 --- a/arch/arm/include/asm/arch-sunxi/prcm.h +++ b/arch/arm/include/asm/arch-sunxi/prcm.h @@ -202,7 +202,7 @@ #ifndef __ASSEMBLY__ #include <linux/compiler.h> -struct __packed sunxi_prcm_reg { +struct sunxi_prcm_reg { u32 cpus_cfg; /* 0x000 */ u8 res0[0x8]; /* 0x004 */ u32 apb0_ratio; /* 0x00c */ diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index a2adf89b5d..4a89bb0e7b 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -405,6 +405,11 @@ M: Jagan Teki <jagan@amarulasolutions.com> S: Maintained F: configs/orangepi_zero_plus2_defconfig +ORANGEPI ZERO PLUS 2 H3 BOARD +M: Diego Rondini <diego.rondini@kynetics.com> +S: Maintained +F: configs/orangepi_zero_plus2_h3_defconfig + ORANGEPI PC 2 BOARD M: Andre Przywara <andre.przywara@arm.com> S: Maintained diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig new file mode 100644 index 0000000000..3000a97e73 --- /dev/null +++ b/configs/orangepi_zero_plus2_h3_defconfig @@ -0,0 +1,19 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=672 +# CONFIG_DRAM_ODT_EN is not set +CONFIG_MMC0_CD_PIN="PH13" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_USE_PREBOOT=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-zero-plus2" +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y |