diff options
99 files changed, 2617 insertions, 1915 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 8a52ccfc58..575a7ec7a2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -551,6 +551,10 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu> meesc ARM926EJS (AT91SAM9263 SoC) +Sedji Gaouaou<sedji.gaouaou@atmel.com> + at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC) + at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC) + Marius Gröger <mag@sysgo.de> impa7 ARM720T (EP7211) @@ -579,24 +579,26 @@ LIST_ARM_CORTEX_A8=" \ ## AT91 Systems ######################################################################### -LIST_at91=" \ - afeb9260 \ - at91cap9adk \ - at91rm9200dk \ - at91rm9200ek \ - at91sam9260ek \ - at91sam9261ek \ - at91sam9263ek \ - at91sam9g20ek \ - at91sam9rlek \ - cmc_pu2 \ - csb637 \ - kb9202 \ - meesc \ - mp2usb \ - m501sk \ - pm9261 \ - pm9263 \ +LIST_at91=" \ + afeb9260 \ + at91cap9adk \ + at91rm9200dk \ + at91rm9200ek \ + at91sam9260ek \ + at91sam9261ek \ + at91sam9263ek \ + at91sam9g10ek \ + at91sam9g20ek \ + at91sam9m10g45ek \ + at91sam9rlek \ + cmc_pu2 \ + csb637 \ + kb9202 \ + meesc \ + mp2usb \ + m501sk \ + pm9261 \ + pm9263 \ " ######################################################################### @@ -849,6 +851,7 @@ LIST_sh4=" \ sh7763rdp \ sh7785lcr \ ap325rxa \ + espt \ " LIST_sh=" \ @@ -352,7 +352,7 @@ GEN_UBOOT = \ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(GEN_UBOOT) ifeq ($(CONFIG_KALLSYMS),y) - smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\0"}'` ; \ + smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o $(GEN_UBOOT) $(obj)common/system_map.o endif @@ -2752,12 +2752,22 @@ at91sam9xeek_config : unconfig at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ -at91sam9261ek_config : unconfig - @mkdir -p $(obj)include +at91sam9261ek_config \ +at91sam9g10ek_nandflash_config \ +at91sam9g10ek_dataflash_cs0_config \ +at91sam9g10ek_dataflash_cs3_config \ +at91sam9g10ek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9g10,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9G10 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ + fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ - elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ else \ @@ -2809,6 +2819,31 @@ meesc_config : unconfig pm9261_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 +at91sam9m10g45ek_nandflash_config \ +at91sam9m10g45ek_dataflash_config \ +at91sam9m10g45ek_dataflash_cs0_config \ +at91sam9m10g45ek_config \ +at91sam9g45ekes_nandflash_config \ +at91sam9g45ekes_dataflash_config \ +at91sam9g45ekes_dataflash_cs0_config \ +at91sam9g45ekes_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9m10,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9M10G45 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ + fi; + + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + else \ + echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 + pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 @@ -3538,18 +3573,14 @@ sh7763rdp_config : unconfig xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) sh7785lcr_32bit_config \ sh7785lcr_config : unconfig - @ >include/config.h - @echo "#define CONFIG_SH7785LCR 1" >> include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/renesas/sh7785lcr + @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h @if [ "$(findstring 32bit, $@)" ] ; then \ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ - cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \ - $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ - else \ - cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \ - $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ fi @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas @@ -3558,6 +3589,11 @@ ap325rxa_config : unconfig @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas +espt_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 espt + #======================================================================== # SPARC #======================================================================== @@ -3636,7 +3672,6 @@ clobber: clean @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f - @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f ifeq ($(OBJTREE),$(SRCTREE)) mrproper \ diff --git a/api_examples/.gitignore b/api_examples/.gitignore index 272816f70d..d7b18dcef5 100644 --- a/api_examples/.gitignore +++ b/api_examples/.gitignore @@ -1,7 +1,2 @@ -crc32.c -ctype.c demo demo.bin -ppcstring.S -string.c -vsprintf.c diff --git a/api_examples/Makefile b/api_examples/Makefile index 4c01437443..2a30bef69d 100644 --- a/api_examples/Makefile +++ b/api_examples/Makefile @@ -29,74 +29,56 @@ endif include $(TOPDIR)/config.mk -ELF-$(CONFIG_API) += demo -BIN-$(CONFIG_API) += demo.bin -ELF := $(ELF-y) -BIN := $(BIN-y) - -#CFLAGS += -v - -COBJS-$(CONFIG_API) += $(ELF:=.o) -SOBJS-$(CONFIG_API) += crt0.o +# Resulting ELF and binary exectuables will be named demo and demo.bin +OUTPUT-$(CONFIG_API) = $(obj)demo +OUTPUT = $(OUTPUT-y) + +# Source files located in the api_examples directory +SOBJ_FILES-$(CONFIG_API) += crt0.o +COBJ_FILES-$(CONFIG_API) += demo.o +COBJ_FILES-$(CONFIG_API) += glue.o +COBJ_FILES-$(CONFIG_API) += libgenwrap.o + +# Source files which exist outside the api_examples directory +EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/crc32.o +EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/ctype.o +EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/string.o +EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/vsprintf.o ifeq ($(ARCH),ppc) -SOBJS-$(CONFIG_API) += ppcstring.o +EXT_SOBJ_FILES-$(CONFIG_API) += lib_ppc/ppcstring.o endif -COBJS := $(COBJS-y) -SOBJS := $(SOBJS-y) - -LIB = $(obj)libglue.a -LIBCOBJS-$(CONFIG_API) += glue.o crc32.o ctype.o string.o vsprintf.o \ - libgenwrap.o -LIBCOBJS := $(LIBCOBJS-y) -LIBOBJS = $(addprefix $(obj),$(SOBJS) $(LIBCOBJS)) +# Create a list of source files so their dependencies can be auto-generated +SRCS += $(addprefix $(SRCTREE)/,$(EXT_COBJ_FILES-y:.o=.c)) +SRCS += $(addprefix $(SRCTREE)/,$(EXT_SOBJ_FILES-y:.o=.S)) +SRCS += $(addprefix $(SRCTREE)/api_examples/,$(COBJ_FILES-y:.o=.c)) +SRCS += $(addprefix $(SRCTREE)/api_examples/,$(SOBJ_FILES-y:.o=.S)) -SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(SOBJS:.o=.S) -OBJS := $(addprefix $(obj),$(COBJS)) -ELF := $(addprefix $(obj),$(ELF)) -BIN := $(addprefix $(obj),$(BIN)) +# Create a list of object files to be compiled +OBJS += $(addprefix $(obj),$(SOBJ_FILES-y)) +OBJS += $(addprefix $(obj),$(COBJ_FILES-y)) +OBJS += $(addprefix $(obj),$(notdir $(EXT_COBJ_FILES-y))) +OBJS += $(addprefix $(obj),$(notdir $(EXT_SOBJ_FILES-y))) gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) CPPFLAGS += -I.. -all: $(obj).depend $(OBJS) $(LIB) $(ELF) $(BIN) +all: $(obj).depend $(OUTPUT) ######################################################################### -$(LIB): $(obj).depend $(LIBOBJS) - $(AR) $(ARFLAGS) $@ $(LIBOBJS) - -$(ELF): -$(obj)%: $(obj)%.o $(LIB) - $(LD) $(obj)crt0.o -Ttext $(LOAD_ADDR) \ - -o $@ $< $(LIB) \ - -L$(gcclibdir) -lgcc - -$(BIN): -$(obj)%.bin: $(obj)% - $(OBJCOPY) -O binary $< $@ 2>/dev/null -$(obj)crc32.c: - @rm -f $(obj)crc32.c - ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c +$(OUTPUT): $(OBJS) + $(LD) -Ttext $(LOAD_ADDR) -o $@ $^ -L$(gcclibdir) -lgcc + $(OBJCOPY) -O binary $@ $(OUTPUT).bin 2>/dev/null -$(obj)ctype.c: - @rm -f $(obj)ctype.c - ln -s $(src)../lib_generic/ctype.c $(obj)ctype.c +# Rule to build generic library C files +$(obj)%.o: $(SRCTREE)/lib_generic/%.c + $(CC) -g $(CFLAGS) -c -o $@ $< -$(obj)string.c: - @rm -f $(obj)string.c - ln -s $(src)../lib_generic/string.c $(obj)string.c - -$(obj)vsprintf.c: - @rm -f $(obj)vsprintf.c - ln -s $(src)../lib_generic/vsprintf.c $(obj)vsprintf.c - -ifeq ($(ARCH),ppc) -$(obj)ppcstring.S: - @rm -f $(obj)ppcstring.S - ln -s $(src)../lib_ppc/ppcstring.S $(obj)ppcstring.S -endif +# Rule to build architecture-specific library assembly files +$(obj)%.o: $(SRCTREE)/lib_$(ARCH)/%.S + $(CC) -g $(CFLAGS) -c -o $@ $< ######################################################################### diff --git a/board/armltd/versatile/Makefile b/board/armltd/versatile/Makefile index 044a429899..80a2c7e21c 100644 --- a/board/armltd/versatile/Makefile +++ b/board/armltd/versatile/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := versatile.o flash.o +COBJS := versatile.o SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/armltd/versatile/flash.c b/board/armltd/versatile/flash.c deleted file mode 100644 index 3bdc895ece..0000000000 --- a/board/armltd/versatile/flash.c +++ /dev/null @@ -1,514 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#define FLASH_PORT_WIDTH32 -#undef FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - - -/* Flash Organization Structure */ -typedef struct OrgDef { - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgIntel_28F256K3[] = { - {256, 128 * 1024}, /* 256 * 128kBytes sectors */ -}; - - -/*----------------------------------------------------------------------- - * Functions - */ -unsigned long flash_init (void); -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -void flash_print_info (flash_info_t * info); -void flash_unprotect_sectors (FPWV * addr); -int flash_erase (flash_info_t * info, int s_first, int s_last); -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); - -/*----------------------------------------------------------------------- - */ - -static void flash_vpp(int on) -{ - unsigned int tmp; - - tmp = *(unsigned int *)(VERSATILE_FLASHCTRL); - - if (on) - tmp |= VERSATILE_FLASHPROG_FLVPPEN; - else - tmp &= ~VERSATILE_FLASHPROG_FLVPPEN; - - *(unsigned int *)(VERSATILE_FLASHCTRL) = tmp; -} - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_vpp(1); - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - flash_vpp(0); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - OrgDef *pOrgDef; - - pOrgDef = OrgIntel_28F256K3; - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - if (i > 255) { - info->start[i] = base + (i * 0x8000); - info->protect[i] = 0; - } else { - info->start[i] = base + - (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F256L18T: - printf ("FLASH 28F256L18T\n"); - break; - case FLASH_28F256K3: - printf ("FLASH 28F256K3\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) (INTEL_ID_28F256L18T): - info->flash_id += FLASH_28F256L18T; - info->sector_count = 259; - info->size = 0x02000000; - break; /* => 32 MB */ - - case (FPW)(INTEL_ID_28F256K3): - info->flash_id += FLASH_28F256K3; - info->sector_count = 256; - info->size = 0x02000000; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/* unprotects a sector for write and erase - * on some intel parts, this unprotects the entire chip, but it - * wont hurt to call this additional times per sector... - */ -void flash_unprotect_sectors (FPWV * addr) -{ -#define PD_FINTEL_WSMS_READY_MASK 0x0080 - - *addr = (FPW) 0x00500050; /* clear status register */ - - /* this sends the clear lock bit command */ - *addr = (FPW) 0x00600060; - *addr = (FPW) 0x00D000D0; -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - flash_vpp(1); - - start = get_timer (0); - last = start; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - flash_unprotect_sectors (addr); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer_masked () > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; - } - } - - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - printf (" done\n"); - } - } - - flash_vpp(0); - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - flash_vpp(1); - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - flash_vpp(0); - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - flash_vpp(0); - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - flash_vpp(0); - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - rc = write_data (info, wp, SWAP (data)); - - flash_vpp(0); - - return rc; -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr); - return (2); - } - - flash_vpp(1); - - flash_unprotect_sectors (addr); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - flash_vpp(0); - return (1); - } - } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - flash_vpp(0); - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 0817e60154..2f6b599a6b 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void) csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* Configure SMC CS3 for NAND/SmartMedia */ +#ifdef CONFIG_AT91SAM9G10EK + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); +#else at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); @@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void) AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); +#endif at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | @@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void) static void at91sam9261ek_dm9000_hw_init(void) { /* Configure SMC CS2 for DM9000 */ +#ifdef CONFIG_AT91SAM9G10EK + at91_sys_write(AT91_SMC_SETUP(2), + AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(2), + AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) | + AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8)); + at91_sys_write(AT91_SMC_CYCLE(2), + AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20)); + at91_sys_write(AT91_SMC_MODE(2), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | + AT91_SMC_TDF_(1)); +#else at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); @@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void) AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); +#endif /* Configure Reset signal as output */ at91_set_gpio_output(AT91_PIN_PC10, 0); @@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void) at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); +#ifdef CONFIG_AT91SAM9G10EK + gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE; +#else gd->fb_base = AT91SAM9261_SRAM_BASE; +#endif } #ifdef CONFIG_LCD_INFO @@ -207,8 +238,13 @@ int board_init(void) /* Enable Ctrlc */ console_init_f(); +#ifdef CONFIG_AT91SAM9G10EK + /* arch number of AT91SAM9G10EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; +#else /* arch number of AT91SAM9261EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile new file mode 100644 index 0000000000..4caf1e416d --- /dev/null +++ b/board/atmel/at91sam9m10g45ek/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += at91sam9m10g45ek.o +COBJS-y += led.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c new file mode 100644 index 0000000000..45a14a95f2 --- /dev/null +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -0,0 +1,334 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/sizes.h> +#include <asm/arch/at91sam9g45.h> +#include <asm/arch/at91sam9_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +#ifdef CONFIG_CMD_NAND +static void at91sam9m10g45ek_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(3)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} +#endif + +#ifdef CONFIG_MACB +static void at91sam9m10g45ek_macb_hw_init(void) +{ + unsigned long rstc; + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PA15) => PHY normal mode (not Test mode) + * ERX0 (PA12) => PHY ADDR0 + * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA12) | + pin_to_mask(AT91_PIN_PA13), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + + rstc = at91_sys_read(AT91_RSTC_MR); + + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0D << 8)) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + + /* Wait for end hardware reset */ + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (rstc) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA12) | + pin_to_mask(AT91_PIN_PA13), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_macb_hw_init(); +} +#endif + +#ifdef CONFIG_LCD + +vidinfo_t panel_info = { + vl_col: 480, + vl_row: 272, + vl_clk: 9000000, + vl_sync: ATMEL_LCDC_INVLINE_NORMAL | + ATMEL_LCDC_INVFRAME_NORMAL, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 45, + vl_left_margin: 1, + vl_right_margin:1, + vl_vsync_len: 1, + vl_upper_margin:40, + vl_lower_margin:1, + mmio: AT91SAM9G45_LCDC_BASE, +}; + + +void lcd_enable(void) +{ + at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_A_periph(AT91_PIN_PE6, 0); /* power down */ +} + +static void at91sam9m10g45ek_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ + at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ + + at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ + at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ + at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ + at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ + at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ + at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ + at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC); + + gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; +} + +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf ("%s\n", U_BOOT_VERSION); + lcd_printf ("(C) 2008 ATMEL Corp\n"); + lcd_printf ("at91support@atmel.com\n"); + lcd_printf ("%s CPU at %s MHz\n", + AT91_CPU_NAME, + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20 ); +} +#endif /* CONFIG_LCD_INFO */ +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9M10G45EK-Board */ +#ifdef CONFIG_AT91SAM9M10G45EK + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; +#elif defined CONFIG_AT91SAM9G45EKES + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES; +#endif + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + at91sam9m10g45ek_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91_spi0_hw_init(1 << 0); +#endif +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 4); +#endif + +#ifdef CONFIG_MACB + at91sam9m10g45ek_macb_hw_init(); +#endif + +#ifdef CONFIG_LCD + at91sam9m10g45ek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00); +#endif + return rc; +} + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 2; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch(slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PB18, 0); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PB3, 0); + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch(slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PB18, 1); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PB3, 1); + break; + } +} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk new file mode 100644 index 0000000000..7fe9d03138 --- /dev/null +++ b/board/atmel/at91sam9m10g45ek/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x73f00000 diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c new file mode 100644 index 0000000000..ff59a2d5d3 --- /dev/null +++ b/board/atmel/at91sam9m10g45ek/led.c @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9g45.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE); + + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); +} diff --git a/board/espt/Makefile b/board/espt/Makefile new file mode 100644 index 0000000000..c79cba8566 --- /dev/null +++ b/board/espt/Makefile @@ -0,0 +1,50 @@ +# +# Copyright (C) 2009 Renesas Solutions Corp. +# Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +# +# board/espt/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := espt.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/espt/config.mk b/board/espt/config.mk new file mode 100644 index 0000000000..006b4326fa --- /dev/null +++ b/board/espt/config.mk @@ -0,0 +1,9 @@ +# +# board/espt/config.mk +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 diff --git a/board/espt/espt.c b/board/espt/espt.c new file mode 100644 index 0000000000..29308587d9 --- /dev/null +++ b/board/espt/espt.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2009 Renesas Solutions Corp. + * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * board/espt/espt.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: ESPT-GIGA\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; + printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state(unsigned short value) +{ +} diff --git a/board/espt/lowlevel_init.S b/board/espt/lowlevel_init.S new file mode 100644 index 0000000000..7d5d72e123 --- /dev/null +++ b/board/espt/lowlevel_init.S @@ -0,0 +1,334 @@ +/* + * Copyright (C) 2009 Renesas Solutions Corp. + * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * board/espt/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/processor.h> +#include <asm/macro.h> + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + + write32 WDTCSR_A, WDTCSR_D + + write32 WDTST_A, WDTST_D + + write32 WDTBST_A, WDTBST_D + + write32 CCR_A, CCR_CACHE_ICI_D + + write32 MMUCR_A, MMU_CONTROL_TI_D + + write32 MSTPCR0_A, MSTPCR0_D + + write32 MSTPCR1_A, MSTPCR1_D + + write32 RAMCR_A, RAMCR_D + + /* + * Setting infomation from + * original ESPT-GIGA bootloader register + */ + write32 MMSEL_A, MMSEL_D + + /* dummy */ + mov.l @r1, r2 + mov.l @r1, r2 + synco + + write32 BCR_A, BCR_D + + write32 CS0BCR_A, CS0BCR_D + + write32 CS0WCR_A, CS0WCR_D + + /* + * DDR-SDRAM setting + */ + + /* set DDR-SDRAM dummy read */ + write32 MMSEL_A, MMSEL_D + + mov.l MMSEL_A, r0 + synco + mov.l @r0, r1 + synco + + mov.l CS0_A, r0 + synco + mov.l @r0, r1 + synco + + /* set DDR-SDRAM bus/endian etc */ + write32 MIM_U_A, MIM_U_D + + write32 MIM_L_A, MIM_L_D0 + + write32 SDR_L_A, SDR_L_A_D0 + + write32 STR_L_A, STR_L_A_D0 + + /* DDR-SDRAM access control */ + write32 MIM_L_A, MIM_L_D1 + + write32 SCR_L_A, SCR_L_A_D0 + + write32 SCR_L_A, SCR_L_A_D1 + + write32 EMRS_A, EMRS_D + + write32 MRS1_A, MRS1_D + + write32 MIM_U_A, MIM_U_D + + write32 MIM_L_A, MIM_L_A_D2 + + write32 SCR_L_A, SCR_L_A_D2 + + write32 SCR_L_A, SCR_L_A_D2 + + write32 MRS2_A, MRS2_D + + /* wait 200us */ + wait_timer REPEAT_R3 + + /* GPIO setting */ + write16 PSEL0_A, PSEL0_D + + write16 PSEL1_A, PSEL1_D + + write16 PSEL2_A, PSEL2_D + + write16 PSEL3_A, PSEL3_D + + write16 PSEL4_A, PSEL4_D + + write8 PADR_A, PADR_D + + write16 PACR_A, PACR_D + + write8 PBDR_A, PBDR_D + + write16 PBCR_A, PBCR_D + + write8 PCDR_A, PCDR_D + + write16 PCCR_A, PCCR_D + + write8 PDDR_A, PDDR_D + + write16 PDCR_A, PDCR_D + + write16 PECR_A, PECR_D + + write16 PFCR_A, PFCR_D + + write16 PGCR_A, PGCR_D + + write16 PHCR_A, PHCR_D + + write16 PICR_A, PICR_D + + write8 PJDR_A, PJDR_D + + write16 PJCR_A, PJCR_D + + /* wait 50us */ + wait_timer REPEAT_R3 + + write8 PKDR_A, PKDR_D + + write16 PKCR_A, PKCR_D + + write16 PLCR_A, PLCR_D + + write16 PMCR_A, PMCR_D + + write16 PNCR_A, PNCR_D + + write16 POCR_A, POCR_D + + + /* ICR0 ,ICR1 */ + write32 ICR0_A, ICR0_D + + write32 ICR1_A, ICR1_D + + /* USB Host */ + write32 USB_USBHSC_A, USB_USBHSC_D + + write32 CCR_A, CCR_CACHE_D_2 + + rts + nop + + .align 2 + +/* GPIO Crontrol Register */ +PACR_A: .long 0xFFEF0000 +PBCR_A: .long 0xFFEF0002 +PCCR_A: .long 0xFFEF0004 +PDCR_A: .long 0xFFEF0006 +PECR_A: .long 0xFFEF0008 +PFCR_A: .long 0xFFEF000A +PGCR_A: .long 0xFFEF000C +PHCR_A: .long 0xFFEF000E +PICR_A: .long 0xFFEF0010 +PJCR_A: .long 0xFFEF0012 +PKCR_A: .long 0xFFEF0014 +PLCR_A: .long 0xFFEF0016 +PMCR_A: .long 0xFFEF0018 +PNCR_A: .long 0xFFEF001A +POCR_A: .long 0xFFEF001C + +/* GPIO Data Register */ +PADR_A: .long 0xFFEF0020 +PBDR_A: .long 0xFFEF0022 +PCDR_A: .long 0xFFEF0024 +PDDR_A: .long 0xFFEF0026 +PJDR_A: .long 0xFFEF0032 +PKDR_A: .long 0xFFEF0034 + +/* GPIO Set data */ +PADR_D: .long 0x00000000 +PACR_D: .long 0x00001400 +PBDR_D: .long 0x00000000 +PBCR_D: .long 0x0000555A +PCDR_D: .long 0x00000000 +PCCR_D: .long 0x00005555 +PDDR_D: .long 0x00000000 +PDCR_D: .long 0x00000155 +PECR_D: .long 0x00000000 +PFCR_D: .long 0x00000000 +PGCR_D: .long 0x00000000 +PHCR_D: .long 0x00000000 +PICR_D: .long 0x00000800 +PJDR_D: .long 0x00000006 +PJCR_D: .long 0x00005A57 +PKDR_D: .long 0x00000000 +PKCR_D: .long 0x0000FFF9 +PLCR_D: .long 0x0000C330 +PMCR_D: .long 0x0000FFFF +PNCR_D: .long 0x00000242 +POCR_D: .long 0x00000000 + +/* Pin Select */ +PSEL0_A: .long 0xFFEF0070 +PSEL1_A: .long 0xFFEF0072 +PSEL2_A: .long 0xFFEF0074 +PSEL3_A: .long 0xFFEF0076 +PSEL4_A: .long 0xFFEF0078 +PSEL0_D: .long 0x0001 +PSEL1_D: .long 0x2400 +PSEL2_D: .long 0x0000 +PSEL3_D: .long 0x2421 +PSEL4_D: .long 0x0000 + +MMSEL_A: .long 0xFE600020 +BCR_A: .long 0xFF801000 +CS0BCR_A: .long 0xFF802000 +CS0WCR_A: .long 0xFF802008 +ICR0_A: .long 0xFFD00000 +ICR1_A: .long 0xFFD0001C + +MMSEL_D: .long 0xA5A50000 +BCR_D: .long 0x05000000 +CS0BCR_D: .long 0x232306F0 +CS0WCR_D: .long 0x00011104 +ICR0_D: .long 0x80C00000 +ICR1_D: .long 0x00020000 + +/* RWBT Address */ +WDTST_A: .long 0xFFCC0000 +WDTCSR_A: .long 0xFFCC0004 +WDTBST_A: .long 0xFFCC0008 +/* RWBT Data */ +WDTST_D: .long 0x5A000FFF +WDTCSR_D: .long 0xA5000000 +WDTBST_D: .long 0x55000000 + +/* Cache Address */ +CCR_A: .long 0xFF00001C +MMUCR_A: .long 0xFF000010 +RAMCR_A: .long 0xFF000074 + +/* Cache Data */ +CCR_CACHE_ICI_D:.long 0x00000800 +CCR_CACHE_D_2: .long 0x00000103 +MMU_CONTROL_TI_D:.long 0x00000004 +RAMCR_D: .long 0x00000200 + +/* Low power mode control Address */ +MSTPCR0_A: .long 0xFFC80030 +MSTPCR1_A: .long 0xFFC80038 +/* Low power mode control Data */ +MSTPCR0_D: .long 0x00000000 +MSTPCR1_D: .long 0x00000000 + +REPEAT0_R3: .long 0x00002000 +REPEAT_R3: .long 0x00000200 +CS0_A: .long 0xA8000000 + +MIM_U_A: .long 0xFE800008 +MIM_L_A: .long 0xFE80000C +SCR_U_A: .long 0xFE800010 +SCR_L_A: .long 0xFE800014 +STR_U_A: .long 0xFE800018 +STR_L_A: .long 0xFE80001C +SDR_U_A: .long 0xFE800030 +SDR_L_A: .long 0xFE800034 +EMRS_A: .long 0xFE902000 +MRS1_A: .long 0xFE900B08 +MRS2_A: .long 0xFE900308 + +MIM_U_D: .long 0x00000000 +MIM_L_D0: .long 0x04100008 +MIM_L_D1: .long 0x02EE0009 +MIM_L_D2: .long 0x02EE0209 + +SDR_L_A_D0: .long 0x00000300 +STR_L_A_D0: .long 0x00010040 +MIM_L_A_D1: .long 0x04100009 +SCR_L_A_D0: .long 0x00000003 +SCR_L_A_D1: .long 0x00000002 +MIM_L_A_D2: .long 0x04100209 +SCR_L_A_D2: .long 0x00000004 + +SCR_L_NORMAL: .long 0x00000000 +SCR_L_NOP: .long 0x00000001 +SCR_L_PALL: .long 0x00000002 +SCR_L_CKE_EN: .long 0x00000003 +SCR_L_CBR: .long 0x00000004 + +STR_L_D: .long 0x000F3980 +SDR_L_D: .long 0x00000400 +EMRS_D: .long 0x00000000 +MRS1_D: .long 0x00000000 +MRS2_D: .long 0x00000000 + +/* USB */ +USB_USBHSC_A: .long 0xFFEC80F0 +USB_USBHSC_D: .long 0x00000000 diff --git a/board/ms7720se/u-boot.lds b/board/ms7720se/u-boot.lds deleted file mode 100644 index 1f9b79290b..0000000000 --- a/board/ms7720se/u-boot.lds +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> - * - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x8C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh3/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/ms7722se/u-boot.lds b/board/ms7722se/u-boot.lds deleted file mode 100644 index 7b0fb67990..0000000000 --- a/board/ms7722se/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x8C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss (NOLOAD) : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds deleted file mode 100644 index 7b0fb67990..0000000000 --- a/board/ms7750se/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x8C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss (NOLOAD) : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h index 8f0838c0ab..f06ee5be46 100644 --- a/board/omap3/pandora/pandora.h +++ b/board/omap3/pandora/pandora.h @@ -107,15 +107,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1))\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1))\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0))\ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ @@ -154,26 +145,26 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ /*GPIO based game buttons*/\ - MUX_VAL(CP(CAM_XCLKA), (IEN | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M4)) /*GPIO_97 - L2*/\ - MUX_VAL(CP(CAM_FLD), (IEN | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTU | DIS | M4)) /*GPIO_99 - MENU*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTU | DIS | M4)) /*GPIO_100 - START*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTU | DIS | M4)) /*GPIO_101 - Y*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTU | DIS | M4)) /*GPIO_102 - L1*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTU | DIS | M4)) /*GPIO_105 - R1*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTU | DIS | M4)) /*GPIO_106 - B*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTU | DIS | M4)) /*GPIO_107 - R2*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTU | DIS | M4)) /*GPIO_109 - X*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTU | DIS | M4)) /*GPIO_110 - UP*/\ - MUX_VAL(CP(CAM_XCLKB), (IEN | PTU | DIS | M4)) /*GPIO_111 - A*/\ + MUX_VAL(CP(CAM_XCLKA), (IEN | PTD | DIS | M4)) /*GPIO_96 - LEFT*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTD | DIS | M4)) /*GPIO_97 - L2*/\ + MUX_VAL(CP(CAM_FLD), (IEN | PTD | DIS | M4)) /*GPIO_98 - RIGHT*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M4)) /*GPIO_99 - MENU*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M4)) /*GPIO_100 - START*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M4)) /*GPIO_101 - Y*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M4)) /*GPIO_102 - L1*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M4)) /*GPIO_103 - DOWN*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M4)) /*GPIO_104 - SELECT*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M4)) /*GPIO_105 - R1*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M4)) /*GPIO_106 - B*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M4)) /*GPIO_107 - R2*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M4)) /*GPIO_109 - X*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M4)) /*GPIO_110 - UP*/\ + MUX_VAL(CP(CAM_XCLKB), (IEN | PTD | DIS | M4)) /*GPIO_111 - A*/\ /*Audio Interface To External DAC (Headphone, Speakers)*/\ MUX_VAL(CP(MCBSP2_FSX), (IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\ MUX_VAL(CP(MCBSP2_CLKX), (IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | DIS | M0)) /*McBSP_CLKS*/\ MUX_VAL(CP(MCBSP2_DR), (IDIS | PTD | DIS | M4)) /*GPIO_118*/\ /* - nPOWERDOWN_DAC*/\ /*Expansion card 1*/\ @@ -219,13 +210,13 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\ MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*McBSP4_FSX*/\ /*GPIO definitions for muxed pins on AV connector*/\ - MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)) /*GPIO_144,*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTD | EN | M4)) /*GPIO_144,*/\ /*UART2_CTS*/\ - MUX_VAL(CP(UART2_RTS), (IEN | PTU | DIS | M4)) /*GPIO_145,*/\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)) /*GPIO_145,*/\ /*UART2_RTS*/\ - MUX_VAL(CP(UART2_TX), (IEN | PTU | EN | M4)) /*GPIO_146,*/\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)) /*GPIO_146,*/\ /*UART2_TX*/\ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147,*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)) /*GPIO_147,*/\ /*UART2_RX*/\ /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ @@ -240,30 +231,26 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ /* - LED_WIFI*/\ /*Switches*/\ - MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | DIS | M4)) /*GPIO_176*/\ /* - nHOLD_SWITCH*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTU | DIS | M4)) /*GPIO_108*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M4)) /*GPIO_108*/\ /* - nLID_SWITCH*/\ /*External IRQs*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M4)) /*GPIO_94*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTD | DIS | M4)) /*GPIO_94*/\ /* - nTOUCH_IRQ*/\ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M4)) /*GPIO_21*/\ /* - WIFI_IRQ*/\ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M4)) /*GPIO_161*/\ /* - nIRQ_NUB1*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTU | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\ /* - nIRQ_NUB2*/\ /*Various other stuff*/\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M4)) /*GPIO_95*/\ - /* - nTOUCH_BUSY*/\ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | DIS | M4)) /*GPIO_163*/\ /* - nOC_USB5*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ - /* - START_ADC*/\ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M4)) /*GPIO_22*/\ /* - MSECURE*/\ - MUX_VAL(CP(CAM_STROBE), (IEN | PTU | DIS | M4)) /*GPIO_126*/\ - /* - HP_DETECT*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M4)) /*GPIO_115*/\ + /* - POP_OVERHEAT*/\ /*External Resets and Enables*/\ MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_14*/\ /* - nHDPHN_SHUTDOWN*/\ @@ -275,16 +262,15 @@ const omap3_sysinfo sysinfo = { /* - nLCD_RESET*/\ MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ /* - RESET_NUBS*/\ - MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M4)) /*GPIO_164*/\ /* - EN_USB_5V*/\ - /*Unused*/\ - MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) /*HDQ_SIO - NC*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL - NC*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA - NC*/\ + /*Spare GPIOs*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTD | EN | M4)) /*GPIO_58*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTD | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTD | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M4)) /*GPIO_95*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | EN | M4)) /*GPIO_167*/\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) /*GPIO_170*/\ /*HS USB OTG Port (connects to HSUSB0)*/\ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ @@ -338,8 +324,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8*/\ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\ /*JTAG*/\ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ @@ -412,6 +396,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ #endif diff --git a/board/renesas/MigoR/u-boot.lds b/board/renesas/MigoR/u-boot.lds deleted file mode 100644 index c004b83853..0000000000 --- a/board/renesas/MigoR/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x8C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/renesas/ap325rxa/u-boot.lds b/board/renesas/ap325rxa/u-boot.lds deleted file mode 100644 index 94bacca37c..0000000000 --- a/board/renesas/ap325rxa/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x88000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x88000000 + (128*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/renesas/r2dplus/u-boot.lds b/board/renesas/r2dplus/u-boot.lds deleted file mode 100644 index e1c15b0c4b..0000000000 --- a/board/renesas/r2dplus/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007,2008 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x0C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/renesas/r7780mp/u-boot.lds b/board/renesas/r7780mp/u-boot.lds deleted file mode 100644 index f32d0b86f7..0000000000 --- a/board/renesas/r7780mp/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007,2008 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x08000000 + (128*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/renesas/sh7763rdp/u-boot.lds b/board/renesas/sh7763rdp/u-boot.lds deleted file mode 100644 index b1a967d480..0000000000 --- a/board/renesas/sh7763rdp/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyrigth (c) 2007,2008 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - /* - Base address of internal SDRAM is 0x0C000000. - Although size of SDRAM can be either 16 or 32 MBytes, - we assume 16 MBytes (ie ignore upper half if the full - 32 MBytes is present). - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x8C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/renesas/sh7785lcr/Makefile b/board/renesas/sh7785lcr/Makefile index b1b538c9d8..b8e43f7d6d 100644 --- a/board/renesas/sh7785lcr/Makefile +++ b/board/renesas/sh7785lcr/Makefile @@ -18,7 +18,7 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a COBJS := sh7785lcr.o selfcheck.o rtl8169_mac.o SOBJS := lowlevel_init.o diff --git a/board/renesas/sh7785lcr/lowlevel_init.S b/board/renesas/sh7785lcr/lowlevel_init.S index 97920df47a..7faad95ffd 100644 --- a/board/renesas/sh7785lcr/lowlevel_init.S +++ b/board/renesas/sh7785lcr/lowlevel_init.S @@ -233,35 +233,6 @@ DBSC2_DBRFCNT0_D: .long 0x00010000 WAIT_200US: .long 33333 /*------- GPIO -------*/ -#define GPIO_BASE 0xffe70000 -PACR_A: .long GPIO_BASE + 0x00 -PBCR_A: .long GPIO_BASE + 0x02 -PCCR_A: .long GPIO_BASE + 0x04 -PDCR_A: .long GPIO_BASE + 0x06 -PECR_A: .long GPIO_BASE + 0x08 -PFCR_A: .long GPIO_BASE + 0x0a -PGCR_A: .long GPIO_BASE + 0x0c -PHCR_A: .long GPIO_BASE + 0x0e -PJCR_A: .long GPIO_BASE + 0x10 -PKCR_A: .long GPIO_BASE + 0x12 -PLCR_A: .long GPIO_BASE + 0x14 -PMCR_A: .long GPIO_BASE + 0x16 -PNCR_A: .long GPIO_BASE + 0x18 -PPCR_A: .long GPIO_BASE + 0x1a -PQCR_A: .long GPIO_BASE + 0x1c -PRCR_A: .long GPIO_BASE + 0x1e -PEPUPR_A: .long GPIO_BASE + 0x48 -PHPUPR_A: .long GPIO_BASE + 0x4e -PJPUPR_A: .long GPIO_BASE + 0x50 -PKPUPR_A: .long GPIO_BASE + 0x52 -PLPUPR_A: .long GPIO_BASE + 0x54 -PMPUPR_A: .long GPIO_BASE + 0x56 -PNPUPR_A: .long GPIO_BASE + 0x58 -PPUPR1_A: .long GPIO_BASE + 0x60 -PPUPR2_A: .long GPIO_BASE + 0x62 -P1MSELR_A: .long GPIO_BASE + 0x80 -P2MSELR_A: .long GPIO_BASE + 0x82 - PACR_D: .long 0x0000 PBCR_D: .long 0x0000 PCCR_D: .long 0x0000 @@ -291,6 +262,35 @@ PPUPR2_D: .long 0xff00 P1MSELR_D: .long 0x3780 P2MSELR_D: .long 0x0000 +#define GPIO_BASE 0xffe70000 +PACR_A: .long GPIO_BASE + 0x00 +PBCR_A: .long GPIO_BASE + 0x02 +PCCR_A: .long GPIO_BASE + 0x04 +PDCR_A: .long GPIO_BASE + 0x06 +PECR_A: .long GPIO_BASE + 0x08 +PFCR_A: .long GPIO_BASE + 0x0a +PGCR_A: .long GPIO_BASE + 0x0c +PHCR_A: .long GPIO_BASE + 0x0e +PJCR_A: .long GPIO_BASE + 0x10 +PKCR_A: .long GPIO_BASE + 0x12 +PLCR_A: .long GPIO_BASE + 0x14 +PMCR_A: .long GPIO_BASE + 0x16 +PNCR_A: .long GPIO_BASE + 0x18 +PPCR_A: .long GPIO_BASE + 0x1a +PQCR_A: .long GPIO_BASE + 0x1c +PRCR_A: .long GPIO_BASE + 0x1e +PEPUPR_A: .long GPIO_BASE + 0x48 +PHPUPR_A: .long GPIO_BASE + 0x4e +PJPUPR_A: .long GPIO_BASE + 0x50 +PKPUPR_A: .long GPIO_BASE + 0x52 +PLPUPR_A: .long GPIO_BASE + 0x54 +PMPUPR_A: .long GPIO_BASE + 0x56 +PNPUPR_A: .long GPIO_BASE + 0x58 +PPUPR1_A: .long GPIO_BASE + 0x60 +PPUPR2_A: .long GPIO_BASE + 0x62 +P1MSELR_A: .long GPIO_BASE + 0x80 +P2MSELR_A: .long GPIO_BASE + 0x82 + /*------- LBSC -------*/ PASCR_A: .long 0xff000070 PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */ diff --git a/board/renesas/sh7785lcr/u-boot_29bit b/board/renesas/sh7785lcr/u-boot_29bit deleted file mode 100644 index 231769f3b3..0000000000 --- a/board/renesas/sh7785lcr/u-boot_29bit +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(.rodata) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/board/renesas/sh7785lcr/u-boot_32bit b/board/renesas/sh7785lcr/u-boot_32bit deleted file mode 100644 index 446fb930f8..0000000000 --- a/board/renesas/sh7785lcr/u-boot_32bit +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyrigth (c) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") -OUTPUT_ARCH(sh) -ENTRY(_start) - -SECTIONS -{ - . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024); - - PROVIDE (reloc_dst = .); - - PROVIDE (_ftext = .); - PROVIDE (_fcode = .); - PROVIDE (_start = .); - - .text : - { - cpu/sh4/start.o (.text) - . = ALIGN(8192); - common/env_embedded.o (.ppcenv) - . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) - . = ALIGN(8192); - *(.text) - . = ALIGN(4); - } =0xFF - PROVIDE (_ecode = .); - .rodata : - { - *(.rodata) - . = ALIGN(4); - } - PROVIDE (_etext = .); - - - PROVIDE (_fdata = .); - .data : - { - *(.data) - . = ALIGN(4); - } - PROVIDE (_edata = .); - - PROVIDE (_fgot = .); - .got : - { - *(.got) - . = ALIGN(4); - } - PROVIDE (_egot = .); - - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); - } - PROVIDE (__u_boot_cmd_end = .); - - PROVIDE (reloc_dst_end = .); - /* _reloc_dst_end = .; */ - - PROVIDE (bss_start = .); - PROVIDE (__bss_start = .); - .bss : - { - *(.bss) - . = ALIGN(4); - } - PROVIDE (bss_end = .); - - PROVIDE (_end = .); -} diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index bbca3892c9..05893f5be5 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -395,11 +395,13 @@ static int ubi_volume_read(char *volume, char *buf, size_t size) return err ? err : count_save - size; } -static int ubi_dev_scan(struct mtd_info *info, char *ubidev) +static int ubi_dev_scan(struct mtd_info *info, char *ubidev, + const char *vid_header_offset) { struct mtd_device *dev; struct part_info *part; struct mtd_partition mtd_part; + char ubi_mtd_param_buffer[80]; u8 pnum; int err; @@ -413,7 +415,11 @@ static int ubi_dev_scan(struct mtd_info *info, char *ubidev) mtd_part.offset = part->offset; add_mtd_partitions(info, &mtd_part, 1); - err = ubi_mtd_param_parse(buffer, NULL); + strcpy(ubi_mtd_param_buffer, buffer); + if (vid_header_offset) + sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum, + vid_header_offset); + err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL); if (err) { del_mtd_partitions(info); return err; @@ -450,6 +456,7 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) char mtd_dev[16]; struct mtd_device *dev; struct part_info *part; + const char *vid_header_offset = NULL; u8 pnum; /* Print current partition */ @@ -497,8 +504,11 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ubi_dev.selected = 1; + if (argc > 3) + vid_header_offset = argv[3]; strcpy(ubi_dev.part_name, argv[2]); - err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name); + err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name, + vid_header_offset); if (err) { printf("UBI init error %d\n", err); ubi_dev.selected = 0; @@ -594,8 +604,9 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(ubi, 6, 1, do_ubi, "ubi commands", - "part [part]" - " - Show or set current partition\n" + "part [part] [offset]\n" + " - Show or set current partition (with optional VID" + " header offset)\n" "ubi info [l[ayout]]" " - Display volume and ubi layout information\n" "ubi create[vol] volume [size] [type]" diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c index d9f60d51ed..ed0e9db2ac 100644 --- a/common/cmd_ubifs.c +++ b/common/cmd_ubifs.c @@ -47,6 +47,10 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) char *vol_name; int ret; + if (argc != 2) { + cmd_usage(cmdtp); + return 1; + } vol_name = argv[1]; debug("Using volume %s\n", vol_name); @@ -88,6 +92,7 @@ int do_ubifs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { char *filename; + char *endp; int ret; u32 addr; u32 size = 0; @@ -98,15 +103,25 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } if (argc < 3) { - printf("Usage:\n%s\n", cmdtp->usage); + cmd_usage(cmdtp); return -1; } - addr = simple_strtoul(argv[1], NULL, 16); + addr = simple_strtoul(argv[1], &endp, 16); + if (endp == argv[1]) { + cmd_usage(cmdtp); + return 1; + } + filename = argv[2]; - if (argc == 4) - size = simple_strtoul(argv[3], NULL, 16); + if (argc == 4) { + size = simple_strtoul(argv[3], &endp, 16); + if (endp == argv[3]) { + cmd_usage(cmdtp); + return 1; + } + } debug("Loading file '%s' to address 0x%08x (size %d)\n", filename, addr, size); ret = ubifs_load(filename, addr, size); @@ -119,7 +134,8 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ubifsmount, 2, 0, do_ubifs_mount, "mount UBIFS volume", - "" + "<volume-name>\n" + " - mount 'volume-name' volume" ); U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls, diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile index 3da89f4fba..4f467be91c 100644 --- a/cpu/arm926ejs/at91/Makefile +++ b/cpu/arm926ejs/at91/Makefile @@ -29,8 +29,11 @@ COBJS-$(CONFIG_AT91CAP9) += at91cap9_devices.o COBJS-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o COBJS-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o COBJS-$(CONFIG_AT91SAM9261) += at91sam9261_devices.o +COBJS-$(CONFIG_AT91SAM9G10) += at91sam9261_devices.o COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o +COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91_LED) += led.o COBJS-y += clock.o COBJS-y += cpu.o diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c new file mode 100644 index 0000000000..98d90f2514 --- /dev/null +++ b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -0,0 +1,175 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +void at91_serial0_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US0); +} + +void at91_serial1_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US1); +} + +void at91_serial2_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PD6, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD7, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US2); +} + +void at91_serial3_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);; +} + +void at91_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_serial0_hw_init(); +#endif + +#ifdef CONFIG_USART1 + at91_serial1_hw_init(); +#endif + +#ifdef CONFIG_USART2 + at91_serial2_hw_init(); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_serial3_hw_init(); +#endif +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI0); + + if (cs_mask & (1 << 0)) { + at91_set_A_periph(AT91_PIN_PB3, 0); + } + if (cs_mask & (1 << 1)) { + at91_set_B_periph(AT91_PIN_PB18, 0); + } + if (cs_mask & (1 << 2)) { + at91_set_B_periph(AT91_PIN_PB19, 0); + } + if (cs_mask & (1 << 3)) { + at91_set_B_periph(AT91_PIN_PD27, 0); + } + if (cs_mask & (1 << 4)) { + at91_set_gpio_output(AT91_PIN_PB3, 0); + } + if (cs_mask & (1 << 5)) { + at91_set_gpio_output(AT91_PIN_PB18, 0); + } + if (cs_mask & (1 << 6)) { + at91_set_gpio_output(AT91_PIN_PB19, 0); + } + if (cs_mask & (1 << 7)) { + at91_set_gpio_output(AT91_PIN_PD27, 0); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */ + at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ + at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI1); + + if (cs_mask & (1 << 0)) { + at91_set_A_periph(AT91_PIN_PB17, 0); + } + if (cs_mask & (1 << 1)) { + at91_set_B_periph(AT91_PIN_PD28, 0); + } + if (cs_mask & (1 << 2)) { + at91_set_A_periph(AT91_PIN_PD18, 0); + } + if (cs_mask & (1 << 3)) { + at91_set_A_periph(AT91_PIN_PD19, 0); + } + if (cs_mask & (1 << 4)) { + at91_set_gpio_output(AT91_PIN_PB17, 0); + } + if (cs_mask & (1 << 5)) { + at91_set_gpio_output(AT91_PIN_PD28, 0); + } + if (cs_mask & (1 << 6)) { + at91_set_gpio_output(AT91_PIN_PD18, 0); + } + if (cs_mask & (1 << 7)) { + at91_set_gpio_output(AT91_PIN_PD19, 0); + } + +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */ +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */ +#endif +} +#endif diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c index 9f03468b6c..574f48824c 100644 --- a/cpu/arm926ejs/at91/clock.c +++ b/cpu/arm926ejs/at91/clock.c @@ -183,15 +183,23 @@ int at91_clock_init(unsigned long main_clock) * For now, assume this parentage won't change. */ mckr = at91_sys_read(AT91_PMC_MCKR); +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + /* plla divisor by 2 */ + plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); +#endif freq = mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_CSS); + freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ #if defined(CONFIG_AT91RM9200) mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ #elif defined(CONFIG_AT91SAM9G20) mck_rate_hz = (mckr & AT91_PMC_MDIV) ? - freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ + freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) - freq /= 2; /* processor clock division */ + freq /= 2; /* processor clock division */ +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + mck_rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ? + freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ #else mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ #endif diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 414565cb65..03b6c86349 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -303,11 +303,11 @@ void cpu_init_f (volatile immap_t * im) struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; /* Configure interface. */ - setbits_be32((void *)ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); + setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); /* Wait for clock to stabilize */ do { - temp = in_be32((void *)ehci->control); + temp = in_be32(&ehci->control); udelay(1000); } while (!(temp & PHY_CLK_VALID)); #endif diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 31ca85dc55..4b5d636bd1 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -87,6 +87,20 @@ DECLARE_GLOBAL_DATA_PTR; */ int __pci_pre_init(struct pci_controller *hose) { +#if defined (CONFIG_405EP) + /* + * Enable the internal PCI arbiter by default. + * + * On 405EP CPUs the internal arbiter can be controlled + * by the I2C strapping EEPROM. If you want to do so + * or if you want to disable the arbiter pci_pre_init() + * must be reimplemented without enabling the arbiter. + * The arbiter is enabled in this place because of + * compatibility reasons. + */ + mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN); +#endif /* CONFIG_405EP */ + return 1; } int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); @@ -323,8 +337,15 @@ void pci_405gp_init(struct pci_controller *hose) } #endif -#if defined(CONFIG_405EP) /* on ppc405ep vendor id is not set */ - pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, 0x1014); /* IBM */ +#if defined(CONFIG_405EP) + /* + * on ppc405ep vendor/device id is not set + * The user manual says 0x1014 (IBM) / 0x0156 (405GP!) + * are the correct values. + */ + pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM); + pci_write_config_word(PCIDEVID_405GP, + PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP); #endif /* diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 577d33fead..bbd795de2a 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -174,11 +174,6 @@ cpu_init_f (void) * Set EMAC noise filter bits */ mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE); - - /* - * Enable the internal PCI arbiter - */ - mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ #if defined(CONFIG_SYS_4xx_GPIO_TABLE) diff --git a/board/renesas/rsk7203/u-boot.lds b/cpu/sh2/u-boot.lds index bd4a550c9e..6db5a00913 100644 --- a/board/renesas/rsk7203/u-boot.lds +++ b/cpu/sh2/u-boot.lds @@ -28,15 +28,9 @@ ENTRY(_start) SECTIONS { /* - * Base address of internal SDRAM is 0x0C000000. - * - * NOTE: This address must match with the definition of - *TEXT_BASE in config.mk (in this directory). + * entry and reloct_dst will be provided via ldflags */ - - . = 0x0C000000 + (8*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); + . = .; PROVIDE (_ftext = .); PROVIDE (_fcode = .); diff --git a/board/mpr2/u-boot.lds b/cpu/sh3/u-boot.lds index deae344a99..1e55b832f5 100644 --- a/board/mpr2/u-boot.lds +++ b/cpu/sh3/u-boot.lds @@ -34,16 +34,9 @@ ENTRY(_start) SECTIONS { /* - Base address of internal SDRAM is 0x8C000000. - U-Boot resides in the last 256 kB of the 64 MB. - - NOTE: This address must match with the definition of - TEXT_BASE in config.mk (in this directory). - - */ - . = 0x8C000000 + (64*1024*1024) - (256*1024); - - PROVIDE (reloc_dst = .); + * entry and reloct_dst will be provided via ldflags + */ + . = .; PROVIDE (_ftext = .); PROVIDE (_fcode = .); diff --git a/board/renesas/sh7785lcr/u-boot.lds b/cpu/sh4/u-boot.lds index 255ab374f9..bff9f43c10 100644 --- a/board/renesas/sh7785lcr/u-boot.lds +++ b/cpu/sh4/u-boot.lds @@ -1,7 +1,9 @@ /* - * Copyrigth (c) 2007 + * Copyright (C) 2007 * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright (C) 2008-2009 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> * * See file CREDITS for list of people who contributed to this * project. @@ -28,9 +30,10 @@ ENTRY(_start) SECTIONS { - . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024); - - PROVIDE (reloc_dst = .); + /* + * entry and reloct_dst will be provided via ldflags + */ + . = .; PROVIDE (_ftext = .); PROVIDE (_fcode = .); @@ -85,7 +88,7 @@ SECTIONS PROVIDE (bss_start = .); PROVIDE (__bss_start = .); - .bss : + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); diff --git a/doc/README.at91 b/doc/README.at91 index 4a2c56bd9e..84b5595a92 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -27,7 +27,7 @@ Environment variables ------------------------------------------------------------------------------ -AT91SAM9261EK +AT91SAM9261EK, AT91SAM9G10EK ------------------------------------------------------------------------------ Memory map @@ -75,6 +75,26 @@ Environment variables ------------------------------------------------------------------------------ +AT91SAM9M10G45EK +------------------------------------------------------------------------------ + +Memory map + 0x20000000 - 23FFFFFF SDRAM (64 MB) + 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12) + +Environment variables + + U-Boot environment variables can be stored at different places: + - Dataflash on SPI chip select 0 (dataflash card) + - Nand flash. + + You can choose your storage location at config step (here for at91sam9m10g45ek) : + make at91sam9m10g45ek_config - use data flash (spi cs0) (default) + make at91sam9m10g45ek_nandflash_config - use nand flash + make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0) + + +------------------------------------------------------------------------------ AT91SAM9RLEK ------------------------------------------------------------------------------ diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index d0732f53fa..81ac5d318a 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -835,14 +835,19 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest, break; case CFI_CMDSET_AMD_EXTENDED: case CFI_CMDSET_AMD_STANDARD: -#ifdef CONFIG_FLASH_CFI_LEGACY - case CFI_CMDSET_AMD_LEGACY: -#endif sect = find_sector(info, dest); flash_unlock_seq (info, sect); flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE); sect_found = 1; break; +#ifdef CONFIG_FLASH_CFI_LEGACY + case CFI_CMDSET_AMD_LEGACY: + sect = find_sector(info, dest); + flash_unlock_seq (info, 0); + flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE); + sect_found = 1; + break; +#endif } switch (info->portwidth) { diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index c1325b905d..a5680e80ee 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -40,6 +40,7 @@ COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o +COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c new file mode 100644 index 0000000000..376378ed3f --- /dev/null +++ b/drivers/mtd/nand/kirkwood_nand.c @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/kirkwood.h> +#include <nand.h> + +/* NAND Flash Soc registers */ +struct kwnandf_registers { + u32 rd_params; /* 0x10418 */ + u32 wr_param; /* 0x1041c */ + u8 pad[0x10470 - 0x1041c - 4]; + u32 ctrl; /* 0x10470 */ +}; + +static struct kwnandf_registers *nf_reg = + (struct kwnandf_registers *)KW_NANDF_BASE; + +/* + * hardware specific access to control-lines/bits + */ +#define NAND_ACTCEBOOT_BIT 0x02 + +static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *nc = mtd->priv; + u32 offs; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + offs = (1 << 0); /* Commands with A[1:0] == 01 */ + else if (ctrl & NAND_ALE) + offs = (1 << 1); /* Addresses with A[1:0] == 10 */ + else + return; + + writeb(cmd, nc->IO_ADDR_W + offs); +} + +void kw_nand_select_chip(struct mtd_info *mtd, int chip) +{ + u32 data; + + data = readl(&nf_reg->ctrl); + data |= NAND_ACTCEBOOT_BIT; + writel(data, &nf_reg->ctrl); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING; + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = kw_nand_hwcontrol; + nand->chip_delay = 30; + nand->select_chip = kw_nand_select_chip; + return 0; +} diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 6de0a04410..c1843539f9 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -447,14 +447,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ + defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ + defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index ec1d689b35..940d4a8b91 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o +COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index bf148c4e24..c674929725 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -41,15 +41,15 @@ int ehci_hcd_init(void) struct usb_ehci *ehci; ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; - hccr = (struct ehci_hccr *)((uint32_t)ehci->caplength); + hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); /* Set to Host mode */ - setbits_le32((void *)ehci->usbmode, CM_HOST); + setbits_le32(&ehci->usbmode, CM_HOST); - out_be32((void *)ehci->snoop1, SNOOP_SIZE_2GB); - out_be32((void *)ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); + out_be32(&ehci->snoop1, SNOOP_SIZE_2GB); + out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); /* Init phy */ if (!strcmp(getenv("usb_phy_type"), "utmi")) @@ -58,13 +58,13 @@ int ehci_hcd_init(void) out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI); /* Enable interface. */ - setbits_be32((void *)ehci->control, USB_EN); + setbits_be32(&ehci->control, USB_EN); - out_be32((void *)ehci->prictrl, 0x0000000c); - out_be32((void *)ehci->age_cnt_limit, 0x00000040); - out_be32((void *)ehci->sictrl, 0x00000001); + out_be32(&ehci->prictrl, 0x0000000c); + out_be32(&ehci->age_cnt_limit, 0x00000040); + out_be32(&ehci->sictrl, 0x00000001); - in_le32((void *)ehci->usbmode); + in_le32(&ehci->usbmode); return 0; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index bbd547b3e3..423ea5d814 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -716,7 +716,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, goto unknown; } /* unblock posted writes */ - ehci_readl(&hcor->or_usbcmd); + (void) ehci_readl(&hcor->or_usbcmd); break; case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): reg = ehci_readl(status_reg); @@ -745,7 +745,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, } ehci_writel(status_reg, reg); /* unblock posted write */ - ehci_readl(&hcor->or_usbcmd); + (void) ehci_readl(&hcor->or_usbcmd); break; default: debug("Unknown request\n"); diff --git a/drivers/usb/host/ehci-kirkwood.c b/drivers/usb/host/ehci-kirkwood.c new file mode 100644 index 0000000000..64997b85ce --- /dev/null +++ b/drivers/usb/host/ehci-kirkwood.c @@ -0,0 +1,108 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <usb.h> +#include "ehci.h" +#include "ehci-core.h" +#include <asm/arch/kirkwood.h> + +#define rdl(off) readl(KW_USB20_BASE + (off)) +#define wrl(off, val) writel((val), KW_USB20_BASE + (off)) + +#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) +#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) +#define USB_TARGET_DRAM 0x0 + +/* + * USB 2.0 Bridge Address Decoding registers setup + */ +static void usb_brg_adrdec_setup(void) +{ + int i; + u32 size, attrib; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + + /* Enable DRAM bank */ + switch (i) { + case 0: + attrib = KWCPU_ATTR_DRAM_CS0; + break; + case 1: + attrib = KWCPU_ATTR_DRAM_CS1; + break; + case 2: + attrib = KWCPU_ATTR_DRAM_CS2; + break; + case 3: + attrib = KWCPU_ATTR_DRAM_CS3; + break; + default: + /* invalide bank, disable access */ + attrib = 0; + break; + } + + size = kw_sdram_bs(i); + if ((size) && (attrib)) + wrl(USB_WINDOW_CTRL(i), + KWCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM, + attrib, KWCPU_WIN_ENABLE)); + else + wrl(USB_WINDOW_CTRL(i), KWCPU_WIN_DISABLE); + + wrl(USB_WINDOW_BASE(i), kw_sdram_bar(i)); + } +} + +/* + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(void) +{ + usb_brg_adrdec_setup(); + + hccr = (struct ehci_hccr *)(KW_USB20_BASE + 0x100); + hcor = (struct ehci_hcor *)((uint32_t) hccr + + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + debug("Kirkwood-ehci: init hccr %x and hcor %x hc_length %d\n", + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + return 0; +} + +/* + * Destroy the appropriate control structures corresponding + * the the EHCI host controller. + */ +int ehci_hcd_stop(void) +{ + return 0; +} + diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index b81c5365ec..f9da3f0b29 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -307,10 +307,4 @@ extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt); extern void write_fifo(u8 ep, u32 length, void *fifo_data); extern void read_fifo(u8 ep, u32 length, void *fifo_data); -/* extern functions */ -extern inline void musb_writew(u32 offset, u16 value); -extern inline void musb_writeb(u32 offset, u8 value); -extern inline u16 musb_readw(u32 offset); -extern inline u8 musb_readb(u32 offset); - #endif /* __MUSB_HDRC_DEFS_H__ */ diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index 352a0d4eb0..19d978b245 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -111,6 +111,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask) { u16 csr; int result = 1; + int timeout = CONFIG_MUSB_TIMEOUT; while (result > 0) { csr = readw(&musbr->txcsr); @@ -152,7 +153,17 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask) } break; } + + /* Check the timeout */ + if (--timeout) + udelay(1); + else { + dev->status = USB_ST_CRC_ERR; + result = -1; + break; + } } + return result; } @@ -162,6 +173,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask) static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep) { u16 csr; + int timeout = CONFIG_MUSB_TIMEOUT; do { if (check_stall(ep, 1)) { @@ -174,6 +186,15 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep) dev->status = USB_ST_CRC_ERR; return 0; } + + /* Check the timeout */ + if (--timeout) + udelay(1); + else { + dev->status = USB_ST_CRC_ERR; + return -1; + } + } while (csr & MUSB_TXCSR_TXPKTRDY); return 1; } @@ -184,6 +205,7 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep) static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep) { u16 csr; + int timeout = CONFIG_MUSB_TIMEOUT; do { if (check_stall(ep, 0)) { @@ -196,6 +218,15 @@ static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep) dev->status = USB_ST_CRC_ERR; return 0; } + + /* Check the timeout */ + if (--timeout) + udelay(1); + else { + dev->status = USB_ST_CRC_ERR; + return -1; + } + } while (!(csr & MUSB_RXCSR_RXPKTRDY)); return 1; } diff --git a/drivers/usb/musb/musb_hcd.h b/drivers/usb/musb/musb_hcd.h index bb83311b01..b7f571d037 100644 --- a/drivers/usb/musb/musb_hcd.h +++ b/drivers/usb/musb/musb_hcd.h @@ -30,6 +30,10 @@ extern unsigned char new[]; #endif +#ifndef CONFIG_MUSB_TIMEOUT +# define CONFIG_MUSB_TIMEOUT 100000 +#endif + /* This defines the endpoint number used for control transfers */ #define MUSB_CONTROL_EP 0 diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index a82955c1bf..9fe94c7e4c 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -89,6 +89,7 @@ #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ #define AT91SAM9_PMC_MDIV_6 (3 << 8) #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ #define AT91_PMC_PDIV_1 (0 << 12) diff --git a/include/asm-arm/arch-at91/at91sam9_matrix.h b/include/asm-arm/arch-at91/at91sam9_matrix.h index 913f374790..6d97189d27 100644 --- a/include/asm-arm/arch-at91/at91sam9_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9_matrix.h @@ -21,6 +21,8 @@ #include <asm/arch/at91sam9rl_matrix.h> #elif defined(CONFIG_AT91CAP9) #include <asm/arch/at91cap9_matrix.h> +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#include <asm/arch/at91sam9g45_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" #endif diff --git a/include/asm-arm/arch-at91/at91sam9g45.h b/include/asm-arm/arch-at91/at91sam9g45.h new file mode 100644 index 0000000000..0feed9c28b --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9g45.h @@ -0,0 +1,139 @@ +/* + * Chip-specific header file for the AT91SAM9M1x family + * + * Copyright (C) 2008 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_H +#define AT91SAM9G45_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Controller Interrupt */ +#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ +#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ +#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ +#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ +#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ +#define AT91SAM9G45_ID_US0 7 /* USART 0 */ +#define AT91SAM9G45_ID_US1 8 /* USART 1 */ +#define AT91SAM9G45_ID_US2 9 /* USART 2 */ +#define AT91SAM9G45_ID_US3 10 /* USART 3 */ +#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ +#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ +#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ +#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ +#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ +#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ +#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ +#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ +#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ +#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ +#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ +#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ +#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ +#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ +#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ +#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ +#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ +#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ +#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ +#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9G45_BASE_UDPHS 0xfff78000 +#define AT91SAM9G45_BASE_TC0 0xfff7c000 +#define AT91SAM9G45_BASE_TC1 0xfff7c040 +#define AT91SAM9G45_BASE_TC2 0xfff7c080 +#define AT91SAM9G45_BASE_MCI0 0xfff80000 +#define AT91SAM9G45_BASE_TWI0 0xfff84000 +#define AT91SAM9G45_BASE_TWI1 0xfff88000 +#define AT91SAM9G45_BASE_US0 0xfff8c000 +#define AT91SAM9G45_BASE_US1 0xfff90000 +#define AT91SAM9G45_BASE_US2 0xfff94000 +#define AT91SAM9G45_BASE_US3 0xfff98000 +#define AT91SAM9G45_BASE_SSC0 0xfff9c000 +#define AT91SAM9G45_BASE_SSC1 0xfffa0000 +#define AT91SAM9G45_BASE_SPI0 0xfffa4000 +#define AT91SAM9G45_BASE_SPI1 0xfffa8000 +#define AT91SAM9G45_BASE_AC97C 0xfffac000 +#define AT91SAM9G45_BASE_TSC 0xfffb0000 +#define AT91SAM9G45_BASE_ISI 0xfffb4000 +#define AT91SAM9G45_BASE_PWMC 0xfffb8000 +#define AT91SAM9G45_BASE_EMAC 0xfffbc000 +#define AT91SAM9G45_BASE_AES 0xfffc0000 +#define AT91SAM9G45_BASE_TDES 0xfffc4000 +#define AT91SAM9G45_BASE_SHA 0xfffc8000 +#define AT91SAM9G45_BASE_TRNG 0xfffcc000 +#define AT91SAM9G45_BASE_MCI1 0xfffd0000 +#define AT91SAM9G45_BASE_TC3 0xfffd4000 +#define AT91SAM9G45_BASE_TC4 0xfffd4040 +#define AT91SAM9G45_BASE_TC5 0xfffd4080 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9G45_BASE_US0 +#define AT91_USART1 AT91SAM9G45_BASE_US1 +#define AT91_USART2 AT91SAM9G45_BASE_US2 +#define AT91_USART3 AT91SAM9G45_BASE_US3 + +/* + * Internal Memory. + */ +#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ + +#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ + +#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ +#define AT91SAM9G45_HCI_BASE 0x00700000 /* USB Host controller (OHCI) */ +#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ +#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +/* + * Cpu Name + */ +#define AT91_CPU_NAME "AT91SAM9G45" + +#endif diff --git a/include/asm-arm/arch-at91/at91sam9g45_matrix.h b/include/asm-arm/arch-at91/at91sam9g45_matrix.h new file mode 100644 index 0000000000..1620e1baff --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9g45_matrix.h @@ -0,0 +1,153 @@ +/* + * Matrix-centric header file for the AT91SAM9M1x family + * + * Copyright (C) 2008 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_MATRIX_H +#define AT91SAM9G45_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) +#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ +#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) +#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) + +#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ +#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ +#define AT91C_VDEC_SEL_OFF (0 << 0) +#define AT91C_VDEC_SEL_ON (1 << 0) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) + +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ + +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) +#define AT91_MATRIX_WPSR_WPV (1 << 0) +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ + +#endif diff --git a/include/asm-arm/arch-at91/clk.h b/include/asm-arm/arch-at91/clk.h index 6aaf82eae2..f642dd9958 100644 --- a/include/asm-arm/arch-at91/clk.h +++ b/include/asm-arm/arch-at91/clk.h @@ -49,6 +49,11 @@ static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id) return get_mck_clk_rate(); } +static inline unsigned long get_spi_clk_rate(unsigned int dev_id) +{ + return get_mck_clk_rate(); +} + static inline unsigned long get_twi_clk_rate(unsigned int dev_id) { return get_mck_clk_rate(); diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index 870410645f..de06a1004b 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -23,7 +23,7 @@ #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 #define AT91_ID_UHP AT91SAM9260_ID_UHP #define AT91_PMC_UHP AT91SAM926x_PMC_UHP -#elif defined(CONFIG_AT91SAM9261) +#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) #include <asm/arch/at91sam9261.h> #define AT91_BASE_SPI AT91SAM9261_BASE_SPI0 #define AT91_ID_UHP AT91SAM9261_ID_UHP @@ -37,6 +37,12 @@ #include <asm/arch/at91sam9rl.h> #define AT91_BASE_SPI AT91SAM9RL_BASE_SPI #define AT91_ID_UHP AT91SAM9RL_ID_UHP +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#include <asm/arch/at91sam9g45.h> +#define AT91_BASE_EMAC AT91SAM9G45_BASE_EMAC +#define AT91_BASE_SPI AT91SAM9G45_BASE_SPI0 +#define AT91_ID_UHP AT91SAM9G45_ID_UHPHS +#define AT91_PMC_UHP AT91SAM926x_PMC_UHP #elif defined(CONFIG_AT91CAP9) #include <asm/arch/at91cap9.h> #define AT91_BASE_SPI AT91CAP9_BASE_SPI0 diff --git a/include/asm-arm/arch-at91/memory-map.h b/include/asm-arm/arch-at91/memory-map.h index 8015dad6a9..f605f37fd2 100644 --- a/include/asm-arm/arch-at91/memory-map.h +++ b/include/asm-arm/arch-at91/memory-map.h @@ -30,5 +30,6 @@ #define USART1_BASE AT91_USART1 #define USART2_BASE AT91_USART2 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) +#define SPI0_BASE AT91_BASE_SPI #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */ diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h index 52dafc22cc..47679dd441 100644 --- a/include/asm-arm/arch-kirkwood/kirkwood.h +++ b/include/asm-arm/arch-kirkwood/kirkwood.h @@ -45,7 +45,7 @@ #define KW_REG_UNDOC_0x1478 (KW_REGISTER(0x1478)) #define KW_UART0_BASE (KW_REGISTER(0x12000)) -#define KW_UART1_BASE (KW_REGISTER(0x13000)) +#define KW_UART1_BASE (KW_REGISTER(0x12100)) #define KW_MPP_BASE (KW_REGISTER(0x10000)) #define KW_GPIO0_BASE (KW_REGISTER(0x10100)) #define KW_GPIO1_BASE (KW_REGISTER(0x10140)) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 5a0885aef2..2a723dceaa 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1952,12 +1952,13 @@ typedef void (*ExcpHndlr) (void) ; #define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ #define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ -#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ -#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ -#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ -#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */ -#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */ -#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */ +#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ +#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */ +#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */ +#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */ +#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */ +#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */ +#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */ #else /* if defined CONFIG_CPU_MONAHANS */ diff --git a/include/asm-sh/clk.h b/include/asm-sh/clk.h new file mode 100644 index 0000000000..9cac6b09f9 --- /dev/null +++ b/include/asm-sh/clk.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_SH_CLK_H__ +#define __ASM_SH_CLK_H__ + +static inline unsigned long get_peripheral_clk_rate(void) +{ + return CONFIG_SYS_CLK_FREQ; +} + +static inline unsigned long get_tmu0_clk_rate(void) +{ + return CONFIG_SYS_CLK_FREQ; +} + +#endif /* __ASM_SH_CLK_H__ */ diff --git a/include/asm-sh/macro.h b/include/asm-sh/macro.h index 61f792a044..2b273c3ef4 100644 --- a/include/asm-sh/macro.h +++ b/include/asm-sh/macro.h @@ -29,7 +29,7 @@ .macro write16, addr, data mov.l \addr ,r1 - mov.l \data ,r0 + mov.w \data ,r0 mov.w r0, @r1 .endm diff --git a/include/common.h b/include/common.h index 7ba6187d6d..a6c7c07692 100644 --- a/include/common.h +++ b/include/common.h @@ -275,7 +275,8 @@ void pci_init_board(void); void pciinfo (int, int); #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000)) - int pci_pre_init (struct pci_controller * ); + int pci_pre_init (struct pci_controller *); + int is_pci_host (struct pci_controller *); #endif #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX)) @@ -285,7 +286,6 @@ void pciinfo (int, int); # if defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init (struct pci_controller *); # endif - int is_pci_host (struct pci_controller *); #if defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index f6777b9bba..251fe6742b 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -103,9 +103,7 @@ #define PCI_ENET1_MEMADDR 0x81000000 #define CONFIG_RTL8139 -#define _IO_BASE 0x00000000 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) + /* Make sure the ethaddr can be overwritten TODO: Remove this on final product */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 50b3a03a01..5e86e4cb90 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -85,7 +85,6 @@ # define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ # define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ # define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -# define _IO_BASE 0 #endif #define CONFIG_NET_MULTI 1 diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index cf8b773c28..df6970cdfa 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -91,7 +91,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -#define _IO_BASE 0 #define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 101dcedeed..87f3a73ae4 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -180,7 +180,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -#define _IO_BASE 0 /* Realtime clock */ #define CONFIG_MCFRTC diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index f2e574b737..d4d3256f75 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -360,16 +360,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif -#define _IO_BASE 0x00000000 /* points to PCI I/O space */ - #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR 0x00000000 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9e00b89862..7085d287db 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -427,12 +427,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #undef CONFIG_TULIP #undef CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 59cfde6284..1d8fecf794 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -340,12 +340,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #undef CONFIG_TULIP #define CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 6f1b1a4c83..235be5143d 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -484,12 +484,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #undef CONFIG_TULIP #undef CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 1091043c01..2f40ef48c9 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -280,10 +280,6 @@ #define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ -/* For RTL8139 */ -#define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); }) -#define _IO_BASE 0x00000000 - /* controller 1, Base address 0xa000 */ #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 035874b312..60ce0f3aca 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -348,10 +348,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | CONFIG_SYS_PHYS_ADDR_HIGH) #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */ -/* For RTL8139 */ -#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) -#define _IO_BASE 0x00000000 - #ifdef CONFIG_PHYS_64BIT /* * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT. diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 967520587a..ac8cb57d08 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -193,8 +193,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 -#define _IO_BASE 0x00000000 - #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 3 diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index c9589bd876..3853574fcb 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -141,7 +141,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 #endif /* __MIGO_R_H */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 93068600ad..676f0134fc 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -519,12 +519,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #undef CONFIG_TULIP #define CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index c6d77e3ae6..6f58a05692 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -170,7 +170,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 #endif /* __AP325RXA_H */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 83e05b343f..6d240230db 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -32,8 +32,11 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#ifdef CONFIG_AT91SAM9G10EK +#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/ +#else #define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ -#define CONFIG_AT91SAM9261EK 1 /* on an AT91SAM9261EK Board */ +#endif #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -62,7 +65,11 @@ #define CONFIG_LCD_INFO_BELOW_LOGO 1 #define CONFIG_SYS_WHITE_ON_BLACK 1 #define CONFIG_ATMEL_LCD 1 +#ifdef CONFIG_AT91SAM9261EK #define CONFIG_ATMEL_LCD_BGR555 1 +#else +#define CONFIG_AT91SAM9G10_LCD_BASE 0x23E00000 /* LCD is no more in SRAM */ +#endif #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* LED */ @@ -147,7 +154,11 @@ #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ +#ifdef CONFIG_AT91SAM9G10EK +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10" +#else #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" +#endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 #define CONFIG_CMD_FAT 1 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h new file mode 100644 index 0000000000..572c45bfb0 --- /dev/null +++ b/include/configs/at91sam9m10g45ek.h @@ -0,0 +1,225 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#ifdef CONFIG_AT91SAM9M10G45EK +#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/ +#else +#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ +#endif +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_RGB565 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ +#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x70000000 +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +/* DataFlash */ +#ifdef CONFIG_ATMEL_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH 1 +#define CONFIG_SPI_FLASH_ATMEL 1 +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#endif + +/* NOR flash, if populated */ +#ifndef CONFIG_CMD_NAND +#define CONFIG_SYS_NO_FLASH 1 +#else +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 +#endif + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_SYS_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) "\ + "rw rootfstype=jffs2" + +#else /* CONFIG_SYS_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro, \ + 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \ + 2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 1e4c716139..887f3fb3a3 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -83,10 +83,9 @@ #endif #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#define ENV_IS_EMBEDDED_CUSTOM /* * SDRAM settings & memory map @@ -245,9 +244,9 @@ * Serial Flash Infomation */ #define CONFIG_BFIN_SPI -/* For the M25P64 SCK Should be Kept < 20Mhz */ -#define CONFIG_ENV_SPI_MAX_HZ 20000000 -#define CONFIG_SF_DEFAULT_SPEED 20000000 +/* For the M25P64 SCK Should be Kept < 15Mhz */ +#define CONFIG_ENV_SPI_MAX_HZ 15000000 +#define CONFIG_SF_DEFAULT_SPEED 15000000 #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 53a25807ae..1153f111d3 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -60,8 +60,13 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 +/* The next 2 lines are for use with DEV-BF5xx */ #define CONFIG_DRIVER_SMC91111 1 #define CONFIG_SMC91111_BASE 0x28000300 +/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */ +/* #define CONFIG_DRIVER_SMC911X 1 */ +/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 // AMS1 */ +/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */ #define CONFIG_HOSTNAME cm-bf561 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */ diff --git a/include/configs/espt.h b/include/configs/espt.h new file mode 100644 index 0000000000..2ec907c1f1 --- /dev/null +++ b/include/configs/espt.h @@ -0,0 +1,126 @@ +/* + * Configuation settings for the ESPT-GIGA board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ESPT_H +#define __ESPT_H + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7763 1 +#define CONFIG_ESPT 1 +#define __LITTLE_ENDIAN 1 + +/* + * Command line configuration. + */ +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SAVEENV + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF0 1 + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ +#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ +#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ +#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments + passed to kernel */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate + settings for this board */ + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE (0x8C000000) +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) + +/* Flash(NOR) S29JL064H */ +#define CONFIG_SYS_FLASH_BASE (0xA0000000) +#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) +#define CONFIG_SYS_MAX_FLASH_BANKS (1) +#define CONFIG_SYS_MAX_FLASH_SECT (150) + +/* U-boot setting */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE (256) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#undef CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +/* Timeout for Flash erase operations (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) +/* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CONFIG_SYS_FLASH_PROTECTION +#undef CONFIG_SYS_DIRECT_FLASH_TFTP +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) +/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) + +/* Clock */ +#define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 + +/* Ether */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_SH_ETHER 1 +#define CONFIG_SH_ETHER_USE_PORT (1) +#define CONFIG_SH_ETHER_PHY_ADDR (0x00) + +#endif /* __SH7763RDP_H */ diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 7d421556e9..4f98ba41a5 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -124,8 +124,6 @@ /* Networking Configuration */ -#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */ - #define CONFIG_TSI108_ETH #define CONFIG_TSI108_ETH_NUM_PORTS 2 @@ -303,8 +301,6 @@ #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16MB */ -#define _IO_BASE 0x00000000 /* points to PCI I/O space */ - /* PCI Config Space mapping */ #define CONFIG_SYS_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 /* 16MB */ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 86f6a934f9..0a472a6581 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -82,8 +82,8 @@ /* Clocks */ #define CONFIG_SYS_CLK_FREQ 24000000 -#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 /* UART */ #define CONFIG_SCIF_CONSOLE 1 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 9a88ec7fa4..ba0a3f8043 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -101,8 +101,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 /* PCMCIA */ #define CONFIG_IDE_PCMCIA 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 53ffbeef24..6755af3d59 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -128,7 +128,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 #endif /* __MS7722SE_H */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 5eed3ab66d..8c06bf2736 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -101,7 +101,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 #endif /* __MS7750SE_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 6fa1eafde7..8931b974aa 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -80,8 +80,8 @@ * SuperH Clock setting */ #define CONFIG_SYS_CLK_FREQ 60000000 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* @@ -123,7 +123,5 @@ */ #define CONFIG_NET_MULTI #define CONFIG_RTL8139 -#define _IO_BASE 0x00000000 -#define KSEG1ADDR(x) (x) #endif /* __CONFIG_H */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 88eb56821f..7738a17b01 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -121,8 +121,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 /* PCI Controller */ #if defined(CONFIG_CMD_PCI) @@ -144,6 +144,9 @@ #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ +#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 8d7456eb69..c8c62ad76e 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -114,8 +114,8 @@ /* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 /* Ether */ #define CONFIG_NET_MULTI 1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 21c3f70f5c..2c18e2f7fd 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -186,7 +186,7 @@ /* Board Clock */ /* The SCIF used external clock. system clock only used timer. */ #define CONFIG_SYS_CLK_FREQ 50000000 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 #endif /* __SH7785LCR_H */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 300271f9d6..a9b70cc367 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -39,6 +39,10 @@ #define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ +#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */ +#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ +#endif + #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 #define CONFIG_SYS_HZ (1000000 / 256) @@ -101,7 +105,6 @@ /* * Command line configuration. */ - #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_FLASH @@ -132,8 +135,13 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Versatile # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Monitor Command Prompt */ +#ifdef CONFIG_ARCH_VERSATILE_AB +# define CONFIG_SYS_PROMPT "VersatileAB # " +#else +# define CONFIG_SYS_PROMPT "VersatilePB # " +#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -159,13 +167,20 @@ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x34000000 +#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ /*----------------------------------------------------------------------- * FLASH and environment organization */ - +/* + * Use the CFI flash driver for ease of use + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_ENV_IS_IN_FLASH 1 +/* + * System control register + */ #define VERSATILE_SYS_BASE 0x10000000 #define VERSATILE_SYS_FLASH_OFFSET 0x4C #define VERSATILE_FLASHCTRL \ @@ -173,19 +188,47 @@ /* Enable writing to flash */ #define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define PHYS_FLASH_SIZE 0x34000000 /* 64MB */ /* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Erase Timeout */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20 * CONFIG_SYS_HZ) /* Write Timeout */ -#define CONFIG_SYS_MAX_FLASH_SECT (256) +#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ + +/* + * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block + * i.e. + * the bottom "sector" (bottom boot), or top "sector" + * (top boot), is a seperate erase region divided into + * 4 (equal) smaller sectors. This, notionally, allows + * quicker erase/rewrire of the most frequently changed + * area...... + * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4 + */ + +#ifdef CONFIG_ARCH_VERSATILE_AB +#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */ +#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE) +#define CONFIG_SYS_MAX_FLASH_SECT (520) +#endif + +#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ +#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */ +#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE +#define CONFIG_SYS_MAX_FLASH_SECT (260) +#endif + +#define CONFIG_SYS_FLASH_BASE 0x34000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE) + +/* The ARM Boot Monitor is shipped in the lowest sector of flash */ -#define PHYS_FLASH_1 (CONFIG_SYS_FLASH_BASE) +#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE) +#define CONFIG_ENV_SIZE 8192 +#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_IS_IN_FLASH 1 /* env in flash */ -#define CONFIG_ENV_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment */ -#define CONFIG_ENV_OFFSET 0x01f00000 /* environment starts */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index ae642b1c4a..400c540cb2 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1519,6 +1519,8 @@ #define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001 #define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002 +#define PCI_VENDOR_ID_ESDGMBH 0x12fe + #define PCI_VENDOR_ID_CBOARDS 0x1307 #define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001 diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index 114056177c..3b99456227 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -85,7 +85,7 @@ #define MPC83XX_SCCR_USB_DRCM_01 0x00100000 #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 -#if defined(CONFIG_MPC83XX) +#if defined(CONFIG_MPC83xx) #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR #elif defined(CONFIG_MPC85xx) #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile index e32ecc92d3..4bdf6d34ce 100644 --- a/lib_blackfin/Makefile +++ b/lib_blackfin/Makefile @@ -40,6 +40,7 @@ COBJS-y += board.o COBJS-y += boot.o COBJS-y += cache.o COBJS-y += clocks.o +COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o COBJS-y += muldi3.o COBJS-$(CONFIG_POST) += post.o tests.o COBJS-y += string.o diff --git a/lib_blackfin/cmd_cache_dump.c b/lib_blackfin/cmd_cache_dump.c new file mode 100644 index 0000000000..de5840e4cc --- /dev/null +++ b/lib_blackfin/cmd_cache_dump.c @@ -0,0 +1,145 @@ +/* + * U-boot - cmd_cache_dump.c + * + * Copyright (c) 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <common.h> +#include <command.h> + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/mpu.h> + +static int check_limit(const char *type, size_t start_limit, size_t end_limit, size_t start, size_t end) +{ + if (start >= start_limit && start <= end_limit && \ + end <= end_limit && end >= start_limit && \ + start <= end) + return 0; + + printf("%s limit violation: %zu <= (user:%zu) <= (user:%zu) <= %zu\n", + type, start_limit, start, end, end_limit); + return 1; +} + +int do_icache_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int cache_status = icache_status(); + + if (cache_status) + icache_disable(); + + uint32_t cmd_base, tag, cache_upper, cache_lower; + + size_t way, way_start = 0, way_end = 3; + size_t sbnk, sbnk_start = 0, sbnk_end = 3; + size_t set, set_start = 0, set_end = 31; + size_t dw; + + if (argc > 1) { + way_start = way_end = simple_strtoul(argv[1], NULL, 10); + if (argc > 2) { + sbnk_start = sbnk_end = simple_strtoul(argv[2], NULL, 10); + if (argc > 3) + set_start = set_end = simple_strtoul(argv[3], NULL, 10); + } + } + + if (check_limit("way", 0, 3, way_start, way_end) || \ + check_limit("subbank", 0, 3, sbnk_start, sbnk_end) || \ + check_limit("set", 0, 31, set_start, set_end)) + return 1; + + puts("Way:Subbank:Set: [valid-tag lower upper] {invalid-tag lower upper}...\n"); + + for (way = way_start; way <= way_end; ++way) { + for (sbnk = sbnk_start; sbnk <= sbnk_end; ++sbnk) { + for (set = set_start; set <= set_end; ++set) { + printf("%zu:%zu:%2zu: ", way, sbnk, set); + for (dw = 0; dw < 4; ++dw) { + if (ctrlc()) + return 1; + + cmd_base = \ + (way << 26) | \ + (sbnk << 16) | \ + (set << 5) | \ + (dw << 3); + + /* first read the tag */ + bfin_write_ITEST_COMMAND(cmd_base | 0x0); + SSYNC(); + tag = bfin_read_ITEST_DATA0(); + printf("%c%08x ", (tag & 0x1 ? ' ' : '{'), tag); + + /* grab the data at this loc */ + bfin_write_ITEST_COMMAND(cmd_base | 0x4); + SSYNC(); + cache_lower = bfin_read_ITEST_DATA0(); + cache_upper = bfin_read_ITEST_DATA1(); + printf("%08x %08x%c ", cache_lower, cache_upper, (tag & 0x1 ? ' ' : '}')); + } + puts("\n"); + } + } + } + + if (cache_status) + icache_enable(); + + return 0; +} + +U_BOOT_CMD(icache_dump, 4, 0, do_icache_dump, + "icache_dump - dump current instruction cache\n", + "[way] [subbank] [set]"); + +int do_dcache_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u32 way, bank, subbank, set; + u32 status, addr; + u32 dmem_ctl = bfin_read_DMEM_CONTROL(); + + for (bank = 0; bank < 2; ++bank) { + if (!(dmem_ctl & (1 << (DMC1_P - bank)))) + continue; + + for (way = 0; way < 2; ++way) + for (subbank = 0; subbank < 4; ++subbank) { + printf("%i:%i:%i:\t", bank, way, subbank); + for (set = 0; set < 64; ++set) { + + if (ctrlc()) + return 1; + + /* retrieve a cache tag */ + bfin_write_DTEST_COMMAND( + way << 26 | + bank << 23 | + subbank << 16 | + set << 5 + ); + CSYNC(); + status = bfin_read_DTEST_DATA0(); + + /* construct the address using the tag */ + addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); + + /* show it */ + if (set && !(set % 4)) + puts("\n\t"); + printf("%c%08x%c%08x%c ", (status & 0x1 ? '[' : '{'), status, (status & 0x2 ? 'd' : ' '), addr, (status & 0x1 ? ']' : '}')); + } + puts("\n"); + } + } + + return 0; +} + +U_BOOT_CMD(dcache_dump, 4, 0, do_dcache_dump, + "dcache_dump - dump current data cache\n", + "[bank] [way] [subbank] [set]"); diff --git a/lib_sh/time.c b/lib_sh/time.c index 8fccce3d6a..52dbcd0611 100644 --- a/lib_sh/time.c +++ b/lib_sh/time.c @@ -1,4 +1,7 @@ /* + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * * (C) Copyright 2007-2008 * Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> * @@ -25,11 +28,30 @@ */ #include <common.h> +#include <div64.h> #include <asm/processor.h> +#include <asm/clk.h> #include <asm/io.h> #define TMU_MAX_COUNTER (~0UL) -static int clk_adj = 1; + +static ulong timer_freq; + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, timer_freq); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= timer_freq; + do_div(usec, 1000000); + + return usec; +} static void tmu_timer_start (unsigned int timer) { @@ -47,10 +69,10 @@ static void tmu_timer_stop (unsigned int timer) int timer_init (void) { - /* Divide clock by TMU_CLK_DIVIDER */ + /* Divide clock by CONFIG_SYS_TMU_CLK_DIV */ u16 bit = 0; - switch (TMU_CLK_DIVIDER) { + switch (CONFIG_SYS_TMU_CLK_DIV) { case 1024: bit = 4; break; @@ -65,15 +87,12 @@ int timer_init (void) break; case 4: default: - bit = 0; break; } writew(readw(TCR0) | bit, TCR0); - /* Clock adjustment calc */ - clk_adj = (int)(1.0 / ((1.0 / CONFIG_SYS_HZ) * 1000000)); - if (clk_adj < 1) - clk_adj = 1; + /* Calc clock rate */ + timer_freq = get_tmu0_clk_rate() >> ((bit + 1) * 2); tmu_timer_stop(0); tmu_timer_start(0); @@ -86,24 +105,22 @@ unsigned long long get_ticks (void) return 0 - readl(TCNT0); } -static unsigned long get_usec (void) -{ - return (0 - readl(TCNT0)); -} - void udelay (unsigned long usec) { - unsigned int start = get_usec(); - unsigned int end = start + (usec * clk_adj); + unsigned long long tmp; + ulong tmo; + + tmo = usec_to_tick(usec); + tmp = get_ticks() + tmo; /* get current timestamp */ - while (get_usec() < end) - continue; + while (get_ticks() < tmp) /* loop till event */ + /*NOP*/; } unsigned long get_timer (unsigned long base) { /* return msec */ - return ((get_usec() / clk_adj) / 1000) - base; + return tick_to_time(get_ticks()) - base; } void set_timer (unsigned long t) @@ -120,5 +137,5 @@ void reset_timer (void) unsigned long get_tbclk (void) { - return CONFIG_SYS_HZ; + return timer_freq; } diff --git a/sh_config.mk b/sh_config.mk index 49d50f7ebd..407e076d1b 100644 --- a/sh_config.mk +++ b/sh_config.mk @@ -22,3 +22,6 @@ # PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ +PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE) + +LDSCRIPT := $(SRCTREE)/cpu/$(CPU)/u-boot.lds |