diff options
| -rw-r--r-- | arch/arm/dts/zynqmp-zcu102-revA.dts | 26 |
1 files changed, 10 insertions, 16 deletions
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 60d3f71031..9f2b46cf76 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -144,12 +144,6 @@ sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { - /* - * Enable all GTs to out from U-Boot - * i2c mw 20 6 0 - setup IO to output - * i2c mw 20 2 ef - setup output values on pins 0-7 - * i2c mw 20 3 ff - setup output values on pins 10-17 - */ compatible = "ti,tca6416"; reg = <0x20>; gpio-controller; @@ -193,7 +187,7 @@ }; }; - tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */ + tca6416_u61: gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; gpio-controller; @@ -224,7 +218,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x75>; - i2c@0 { /* i2c mw 75 0 1 */ + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -280,7 +274,7 @@ shunt-resistor = <5000>; }; }; - i2c@1 { /* i2c mw 75 0 1 */ + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -326,7 +320,7 @@ shunt-resistor = <5000>; }; }; - i2c@2 { /* i2c mw 75 0 1 */ + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -409,7 +403,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x74>; - i2c@0 { /* i2c mw 74 0 1 */ + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -426,7 +420,7 @@ reg = <0x54>; }; }; - i2c@1 { /* i2c mw 74 0 2 */ + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -436,7 +430,7 @@ }; }; - i2c@2 { /* i2c mw 74 0 4 */ + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -449,7 +443,7 @@ clock-frequency = <300000000>; }; }; - i2c@3 { /* i2c mw 74 0 8 */ + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -462,7 +456,7 @@ clock-frequency = <148500000>; }; }; - i2c@4 { /* i2c mw 74 0 10 */ + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -503,7 +497,7 @@ reg = <2>; /* SYSMON */ }; - i2c@3 { /* i2c mw 75 0 8 */ + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; |