diff options
| -rw-r--r-- | arch/arm/cpu/armv7/zynq/slcr.c | 13 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-zynq/sys_proto.h | 2 | ||||
| -rw-r--r-- | drivers/net/zynq_gem.c | 17 |
3 files changed, 20 insertions, 12 deletions
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index 6710d92c34..d7c1882332 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -8,6 +8,7 @@ #include <asm/io.h> #include <malloc.h> #include <asm/arch/hardware.h> +#include <asm/arch/clk.h> #define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D @@ -50,8 +51,10 @@ void zynq_slcr_cpu_reset(void) } /* Setup clk for network */ -void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk) +void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) { + int ret; + zynq_slcr_unlock(); if (gem_id > 1) { @@ -59,14 +62,14 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk) goto out; } + ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate); + if (ret) + goto out; + if (gem_id) { - /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ - writel(clk, &slcr_base->gem1_clk_ctrl); /* Configure GEM_RCLK_CTRL */ writel(1, &slcr_base->gem1_rclk_ctrl); } else { - /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ - writel(clk, &slcr_base->gem0_clk_ctrl); /* Configure GEM_RCLK_CTRL */ writel(1, &slcr_base->gem0_rclk_ctrl); } diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index a485d790a3..0a2ba058f2 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -10,7 +10,7 @@ extern void zynq_slcr_lock(void); extern void zynq_slcr_unlock(void); extern void zynq_slcr_cpu_reset(void); -extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk); +extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_boot_mode(void); diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 2eb9e7d1ef..6d4001b017 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -90,6 +90,11 @@ #define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000 #define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000 +/* Clock frequencies for different speeds */ +#define ZYNQ_GEM_FREQUENCY_10 2500000UL +#define ZYNQ_GEM_FREQUENCY_100 25000000UL +#define ZYNQ_GEM_FREQUENCY_1000 125000000UL + /* Device registers */ struct zynq_gem_regs { u32 nwctrl; /* Network Control reg */ @@ -270,7 +275,8 @@ static int zynq_gem_setup_mac(struct eth_device *dev) static int zynq_gem_init(struct eth_device *dev, bd_t * bis) { - u32 i, clk = 0; + u32 i; + unsigned long clk_rate = 0; struct phy_device *phydev; const u32 stat_size = (sizeof(struct zynq_gem_regs) - offsetof(struct zynq_gem_regs, stat)) / 4; @@ -348,23 +354,22 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) case SPEED_1000: writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000, ®s->nwcfg); - clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + clk_rate = ZYNQ_GEM_FREQUENCY_1000; break; case SPEED_100: clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000, ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100); - clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + clk_rate = ZYNQ_GEM_FREQUENCY_100; break; case SPEED_10: - /* FIXME untested */ - clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + clk_rate = ZYNQ_GEM_FREQUENCY_10; break; } /* Change the rclk and clk only not using EMIO interface */ if (!priv->emio) zynq_slcr_gem_clk_setup(dev->iobase != - ZYNQ_GEM_BASEADDR0, clk); + ZYNQ_GEM_BASEADDR0, clk_rate); setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); |