diff options
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | README | 6 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/board_late_init.c | 2 | ||||
| -rw-r--r-- | common/spl/Kconfig | 2 | ||||
| -rw-r--r-- | common/spl/spl_spi.c | 2 | ||||
| -rw-r--r-- | doc/README.SPL | 4 | ||||
| -rw-r--r-- | doc/README.arm-relocation | 2 | ||||
| -rw-r--r-- | doc/README.nand | 6 | ||||
| -rw-r--r-- | doc/README.zynq | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mtd/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 298 | ||||
| -rw-r--r-- | drivers/mtd/nand/Makefile | 75 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 297 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/Makefile | 77 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/am335x_spl_bch.c (renamed from drivers/mtd/nand/am335x_spl_bch.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/arasan_nfc.c (renamed from drivers/mtd/nand/arasan_nfc.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/atmel_nand.c (renamed from drivers/mtd/nand/atmel_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/atmel_nand_ecc.h (renamed from drivers/mtd/nand/atmel_nand_ecc.h) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/davinci_nand.c (renamed from drivers/mtd/nand/davinci_nand.c) | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/denali.c (renamed from drivers/mtd/nand/denali.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/denali.h (renamed from drivers/mtd/nand/denali.h) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/denali_dt.c (renamed from drivers/mtd/nand/denali_dt.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/denali_spl.c (renamed from drivers/mtd/nand/denali_spl.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsl_elbc_nand.c (renamed from drivers/mtd/nand/fsl_elbc_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsl_elbc_spl.c (renamed from drivers/mtd/nand/fsl_elbc_spl.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsl_ifc_nand.c (renamed from drivers/mtd/nand/fsl_ifc_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsl_ifc_spl.c (renamed from drivers/mtd/nand/fsl_ifc_spl.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsl_upm.c (renamed from drivers/mtd/nand/fsl_upm.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/fsmc_nand.c (renamed from drivers/mtd/nand/fsmc_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/kb9202_nand.c (renamed from drivers/mtd/nand/kb9202_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/kirkwood_nand.c (renamed from drivers/mtd/nand/kirkwood_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/kmeter1_nand.c (renamed from drivers/mtd/nand/kmeter1_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/lpc32xx_nand_mlc.c (renamed from drivers/mtd/nand/lpc32xx_nand_mlc.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/lpc32xx_nand_slc.c (renamed from drivers/mtd/nand/lpc32xx_nand_slc.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxc_nand.c (renamed from drivers/mtd/nand/mxc_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxc_nand.h (renamed from drivers/mtd/nand/mxc_nand.h) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxc_nand_spl.c (renamed from drivers/mtd/nand/mxc_nand_spl.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxs_nand.c (renamed from drivers/mtd/nand/mxs_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxs_nand.h (renamed from drivers/mtd/nand/mxs_nand.h) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxs_nand_dt.c (renamed from drivers/mtd/nand/mxs_nand_dt.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/mxs_nand_spl.c (renamed from drivers/mtd/nand/mxs_nand_spl.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand.c (renamed from drivers/mtd/nand/nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_base.c (renamed from drivers/mtd/nand/nand_base.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_bbt.c (renamed from drivers/mtd/nand/nand_bbt.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_bch.c (renamed from drivers/mtd/nand/nand_bch.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_ecc.c (renamed from drivers/mtd/nand/nand_ecc.c) | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_ids.c (renamed from drivers/mtd/nand/nand_ids.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_plat.c (renamed from drivers/mtd/nand/nand_plat.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_spl_load.c (renamed from drivers/mtd/nand/nand_spl_load.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_spl_loaders.c (renamed from drivers/mtd/nand/nand_spl_loaders.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_spl_simple.c (renamed from drivers/mtd/nand/nand_spl_simple.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_timings.c (renamed from drivers/mtd/nand/nand_timings.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_util.c (renamed from drivers/mtd/nand/nand_util.c) | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/omap_elm.c (renamed from drivers/mtd/nand/omap_elm.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/omap_gpmc.c (renamed from drivers/mtd/nand/omap_gpmc.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/pxa3xx_nand.c (renamed from drivers/mtd/nand/pxa3xx_nand.c) | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/pxa3xx_nand.h (renamed from drivers/mtd/nand/pxa3xx_nand.h) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/sunxi_nand.c (renamed from drivers/mtd/nand/sunxi_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/sunxi_nand_spl.c (renamed from drivers/mtd/nand/sunxi_nand_spl.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/tegra_nand.c (renamed from drivers/mtd/nand/tegra_nand.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/tegra_nand.h (renamed from drivers/mtd/nand/tegra_nand.h) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/vf610_nfc.c (renamed from drivers/mtd/nand/vf610_nfc.c) | 0 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/zynq_nand.c (renamed from drivers/mtd/nand/zynq_nand.c) | 0 | ||||
| -rw-r--r-- | include/configs/MPC8313ERDB.h | 2 |
66 files changed, 400 insertions, 395 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 64fb41ece7..20a0a5e12b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -298,7 +298,7 @@ F: drivers/i2c/i2c-cdns.c F: drivers/i2c/muxes/pca954x.c F: drivers/i2c/zynq_i2c.c F: drivers/mmc/zynq_sdhci.c -F: drivers/mtd/nand/zynq_nand.c +F: drivers/mtd/nand/raw/zynq_nand.c F: drivers/net/phy/xilinx_phy.c F: drivers/net/zynq_gem.c F: drivers/serial/serial_zynq.c @@ -322,7 +322,7 @@ F: drivers/i2c/i2c-cdns.c F: drivers/i2c/muxes/pca954x.c F: drivers/i2c/zynq_i2c.c F: drivers/mmc/zynq_sdhci.c -F: drivers/mtd/nand/zynq_nand.c +F: drivers/mtd/nand/raw/zynq_nand.c F: drivers/net/phy/xilinx_phy.c F: drivers/net/zynq_gem.c F: drivers/serial/serial_zynq.c @@ -467,7 +467,7 @@ NAND FLASH #M: Scott Wood <oss@buserror.net> S: Orphaned (Since 2018-07) T: git git://git.denx.de/u-boot-nand-flash.git -F: drivers/mtd/nand/ +F: drivers/mtd/nand/raw/ NDS32 M: Macpaul Lin <macpaul@andestech.com> @@ -689,7 +689,7 @@ libs-y += drivers/dma/ libs-y += drivers/gpio/ libs-y += drivers/i2c/ libs-y += drivers/mtd/ -libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ +libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/ libs-y += drivers/mtd/onenand/ libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ libs-y += drivers/mtd/spi/ @@ -3256,8 +3256,8 @@ Low Level (hardware related) configuration options: a 16 bit bus. Not all NAND drivers use this symbol. Example of drivers that use it: - - drivers/mtd/nand/ndfc.c - - drivers/mtd/nand/mxc_nand.c + - drivers/mtd/nand/raw/ndfc.c + - drivers/mtd/nand/raw/mxc_nand.c - CONFIG_SYS_NDFC_EBC0_CFG Sets the EBC0_CFG register for the NDFC. If not defined @@ -3374,7 +3374,7 @@ Low Level (hardware related) configuration options: - CONFIG_SYS_NAND_NO_SUBPAGE_WRITE Option to disable subpage write in NAND driver driver that uses this: - drivers/mtd/nand/davinci_nand.c + drivers/mtd/nand/raw/davinci_nand.c Freescale QE/FMAN Firmware Support: ----------------------------------- diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c index 8ffb9a8d3c..1b871c62ce 100644 --- a/arch/arm/mach-uniphier/board_late_init.c +++ b/arch/arm/mach-uniphier/board_late_init.c @@ -12,7 +12,7 @@ #include <stdio.h> #include <linux/io.h> #include <linux/printk.h> -#include <../drivers/mtd/nand/denali.h> +#include <../drivers/mtd/nand/raw/denali.h> #include "init.h" diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 280496fbe0..18dbc238bf 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -487,7 +487,7 @@ config SPL_NAND_SUPPORT help Enable support for NAND (Negative AND) flash in SPL. NAND flash can be used to allow SPL to load U-Boot from supported devices. - This enables the drivers in drivers/mtd/nand as part of an SPL + This enables the drivers in drivers/mtd/nand/raw as part of an SPL build. config SPL_NET_SUPPORT diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index ba60a3a3c5..0016d49739 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2011 OMICRON electronics GmbH * - * based on drivers/mtd/nand/nand_spl_load.c + * based on drivers/mtd/nand/raw/nand_spl_load.c * * Copyright (C) 2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. diff --git a/doc/README.SPL b/doc/README.SPL index 3ba313caa8..fc1ca1ad4f 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -57,11 +57,11 @@ CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o) CONFIG_SPL_EXT_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o) CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o) -CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o) +CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/raw/libnand.o) CONFIG_SPL_DRIVERS_MISC_SUPPORT (drivers/misc) CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o) CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o) -CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o) +CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/raw/nand_spl_load.o) CONFIG_SPL_SPI_LOAD (drivers/mtd/spi/spi_spl_load.o) CONFIG_SPL_RAM_DEVICE (common/spl/spl.c) CONFIG_SPL_WATCHDOG_SUPPORT (drivers/watchdog/libwatchdog.o) diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 645b3746c8..d2a7e8122e 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -84,7 +84,7 @@ Relocation with SPL (example for the tx25 booting from NAND Flash): - cpu copies the first page from NAND to 0xbb000000 (IMX_NFC_BASE) and start with code execution on this address. -- The First page contains u-boot code from drivers/mtd/nand/mxc_nand_spl.c +- The First page contains u-boot code from drivers/mtd/nand/raw/mxc_nand_spl.c which inits the dram, cpu registers, reloacte itself to CONFIG_SPL_TEXT_BASE and loads the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution @CONFIG_SYS_NAND_U_BOOT_START diff --git a/doc/README.nand b/doc/README.nand index cda11b43ff..ec461b2dc9 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -116,7 +116,7 @@ Configuration Options: The maximum number of NAND chips per device to be supported. CONFIG_SYS_NAND_SELF_INIT - Traditionally, glue code in drivers/mtd/nand/nand.c has driven + Traditionally, glue code in drivers/mtd/nand/raw/nand.c has driven the initialization process -- it provides the mtd and nand structs, calls a board init function for a specific device, calls nand_scan(), and registers with mtd. @@ -125,7 +125,7 @@ Configuration Options: run code between nand_scan_ident() and nand_scan_tail(), or other deviations from the "normal" flow. - If a board defines CONFIG_SYS_NAND_SELF_INIT, drivers/mtd/nand/nand.c + If a board defines CONFIG_SYS_NAND_SELF_INIT, drivers/mtd/nand/raw/nand.c will make one call to board_nand_init(), with no arguments. That function is responsible for calling a driver init function for each NAND device on the board, that performs all initialization @@ -280,7 +280,7 @@ NOTE: ===== The Disk On Chip driver is currently broken and has been for some time. -There is a driver in drivers/mtd/nand, taken from Linux, that works with +There is a driver in drivers/mtd/nand/raw, taken from Linux, that works with the current NAND system but has not yet been adapted to the u-boot environment. diff --git a/doc/README.zynq b/doc/README.zynq index 5b0672c503..da977b2016 100644 --- a/doc/README.zynq +++ b/doc/README.zynq @@ -63,7 +63,7 @@ bootmode strings at runtime. spi - drivers/spi/zynq_spi.c qspi - drivers/spi/zynq_qspi.c i2c - drivers/i2c/zynq_i2c.c - nand - drivers/mtd/nand/zynq_nand.c + nand - drivers/mtd/nand/raw/zynq_nand.c - Done proper cleanups on board configurations - Added basic FDT support for zynq boards - d-cache support for zynq_gem.c diff --git a/drivers/Makefile b/drivers/Makefile index 23ea609b09..fe8d40dddb 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ obj-$(CONFIG_$(SPL_TPL_)LED) += led/ obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/ -obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/ +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/ obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 9cec06510c..cdf515256a 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -18,3 +18,5 @@ obj-$(CONFIG_FLASH_PIC32) += pic32_flash.o obj-$(CONFIG_ST_SMI) += st_smi.o obj-$(CONFIG_STM32_FLASH) += stm32_flash.o obj-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o + +obj-y += nand/ diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 1e4ea7bdd4..6d53734718 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,297 +1 @@ - -menuconfig NAND - bool "NAND Device Support" -if NAND - -config SYS_NAND_SELF_INIT - bool - help - This option, if enabled, provides more flexible and linux-like - NAND initialization process. - -config NAND_ATMEL - bool "Support Atmel NAND controller" - imply SYS_NAND_USE_FLASH_BBT - help - Enable this driver for NAND flash platforms using an Atmel NAND - controller. - -config NAND_DAVINCI - bool "Support TI Davinci NAND controller" - help - Enable this driver for NAND flash controllers available in TI Davinci - and Keystone2 platforms - -config NAND_DENALI - bool - select SYS_NAND_SELF_INIT - imply CMD_NAND - -config NAND_DENALI_DT - bool "Support Denali NAND controller as a DT device" - select NAND_DENALI - depends on OF_CONTROL && DM - help - Enable the driver for NAND flash on platforms using a Denali NAND - controller as a DT device. - -config NAND_DENALI_SPARE_AREA_SKIP_BYTES - int "Number of bytes skipped in OOB area" - depends on NAND_DENALI - range 0 63 - help - This option specifies the number of bytes to skip from the beginning - of OOB area before last ECC sector data starts. This is potentially - used to preserve the bad block marker in the OOB area. - -config NAND_LPC32XX_SLC - bool "Support LPC32XX_SLC controller" - help - Enable the LPC32XX SLC NAND controller. - -config NAND_OMAP_GPMC - bool "Support OMAP GPMC NAND controller" - depends on ARCH_OMAP2PLUS - help - Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms. - GPMC controller is used for parallel NAND flash devices, and can - do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8 - and BCH16 ECC algorithms. - -config NAND_OMAP_GPMC_PREFETCH - bool "Enable GPMC Prefetch" - depends on NAND_OMAP_GPMC - default y - help - On OMAP platforms that use the GPMC controller - (CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that - uses the prefetch mode to speed up read operations. - -config NAND_OMAP_ELM - bool "Enable ELM driver for OMAPxx and AMxx platforms." - depends on NAND_OMAP_GPMC && !OMAP34XX - help - ELM controller is used for ECC error detection (not ECC calculation) - of BCH4, BCH8 and BCH16 ECC algorithms. - Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, - thus such SoC platforms need to depend on software library for ECC error - detection. However ECC calculation on such plaforms would still be - done by GPMC controller. - -config NAND_VF610_NFC - bool "Support for Freescale NFC for VF610" - select SYS_NAND_SELF_INIT - imply CMD_NAND - help - Enables support for NAND Flash Controller on some Freescale - processors like the VF610, MCF54418 or Kinetis K70. - The driver supports a maximum 2k page size. The driver - currently does not support hardware ECC. - -choice - prompt "Hardware ECC strength" - depends on NAND_VF610_NFC - default SYS_NAND_VF610_NFC_45_ECC_BYTES - help - Select the ECC strength used in the hardware BCH ECC block. - -config SYS_NAND_VF610_NFC_45_ECC_BYTES - bool "24-error correction (45 ECC bytes)" - -config SYS_NAND_VF610_NFC_60_ECC_BYTES - bool "32-error correction (60 ECC bytes)" - -endchoice - -config NAND_PXA3XX - bool "Support for NAND on PXA3xx and Armada 370/XP/38x" - select SYS_NAND_SELF_INIT - imply CMD_NAND - help - This enables the driver for the NAND flash device found on - PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). - -config NAND_SUNXI - bool "Support for NAND on Allwinner SoCs" - default ARCH_SUNXI - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I - select SYS_NAND_SELF_INIT - select SYS_NAND_U_BOOT_LOCATIONS - select SPL_NAND_SUPPORT - imply CMD_NAND - ---help--- - Enable support for NAND. This option enables the standard and - SPL drivers. - The SPL driver only supports reading from the NAND using DMA - transfers. - -if NAND_SUNXI - -config NAND_SUNXI_SPL_ECC_STRENGTH - int "Allwinner NAND SPL ECC Strength" - default 64 - -config NAND_SUNXI_SPL_ECC_SIZE - int "Allwinner NAND SPL ECC Step Size" - default 1024 - -config NAND_SUNXI_SPL_USABLE_PAGE_SIZE - int "Allwinner NAND SPL Usable Page Size" - default 1024 - -endif - -config NAND_ARASAN - bool "Configure Arasan Nand" - select SYS_NAND_SELF_INIT - imply CMD_NAND - help - This enables Nand driver support for Arasan nand flash - controller. This uses the hardware ECC for read and - write operations. - -config NAND_MXC - bool "MXC NAND support" - depends on CPU_ARM926EJS || CPU_ARM1136 || MX5 - imply CMD_NAND - help - This enables the NAND driver for the NAND flash controller on the - i.MX27 / i.MX31 / i.MX5 rocessors. - -config NAND_MXS - bool "MXS NAND support" - depends on MX23 || MX28 || MX6 || MX7 - select SYS_NAND_SELF_INIT - imply CMD_NAND - select APBH_DMA - select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 - select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 - help - This enables NAND driver for the NAND flash controller on the - MXS processors. - -if NAND_MXS - -config NAND_MXS_DT - bool "Support MXS NAND controller as a DT device" - depends on OF_CONTROL && MTD - help - Enable the driver for MXS NAND flash on platforms using - device tree. - -config NAND_MXS_USE_MINIMUM_ECC - bool "Use minimum ECC strength supported by the controller" - default false - -endif - -config NAND_ZYNQ - bool "Support for Zynq Nand controller" - select SYS_NAND_SELF_INIT - imply CMD_NAND - help - This enables Nand driver support for Nand flash controller - found on Zynq SoC. - -config NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS - bool "Enable use of 1st stage bootloader timing for NAND" - depends on NAND_ZYNQ - help - This flag prevent U-boot reconfigure NAND flash controller and reuse - the NAND timing from 1st stage bootloader. - -comment "Generic NAND options" - -config SYS_NAND_BLOCK_SIZE - hex "NAND chip eraseblock size" - depends on ARCH_SUNXI - help - Number of data bytes in one eraseblock for the NAND chip on the - board. This is the multiple of NAND_PAGE_SIZE and the number of - pages. - -config SYS_NAND_PAGE_SIZE - hex "NAND chip page size" - depends on ARCH_SUNXI - help - Number of data bytes in one page for the NAND chip on the - board, not including the OOB area. - -config SYS_NAND_OOBSIZE - hex "NAND chip OOB size" - depends on ARCH_SUNXI - help - Number of bytes in the Out-Of-Band area for the NAND chip on - the board. - -# Enhance depends when converting drivers to Kconfig which use this config -# option (mxc_nand, ndfc, omap_gpmc). -config SYS_NAND_BUSWIDTH_16BIT - bool "Use 16-bit NAND interface" - depends on NAND_VF610_NFC || NAND_OMAP_GPMC || NAND_MXC || ARCH_DAVINCI - help - Indicates that NAND device has 16-bit wide data-bus. In absence of this - config, bus-width of NAND device is assumed to be either 8-bit and later - determined by reading ONFI params. - Above config is useful when NAND device's bus-width information cannot - be determined from on-chip ONFI params, like in following scenarios: - - SPL boot does not support reading of ONFI parameters. This is done to - keep SPL code foot-print small. - - In current U-Boot flow using nand_init(), driver initialization - happens in board_nand_init() which is called before any device probe - (nand_scan_ident + nand_scan_tail), thus device's ONFI parameters are - not available while configuring controller. So a static CONFIG_NAND_xx - is needed to know the device's bus-width in advance. - -if SPL - -config SYS_NAND_U_BOOT_LOCATIONS - bool "Define U-boot binaries locations in NAND" - help - Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig. - This option should not be enabled when compiling U-boot for boards - defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h - file. - -config SYS_NAND_U_BOOT_OFFS - hex "Location in NAND to read U-Boot from" - default 0x800000 if NAND_SUNXI - depends on SYS_NAND_U_BOOT_LOCATIONS - help - Set the offset from the start of the nand where u-boot should be - loaded from. - -config SYS_NAND_U_BOOT_OFFS_REDUND - hex "Location in NAND to read U-Boot from" - default SYS_NAND_U_BOOT_OFFS - depends on SYS_NAND_U_BOOT_LOCATIONS - help - Set the offset from the start of the nand where the redundant u-boot - should be loaded from. - -config SPL_NAND_AM33XX_BCH - bool "Enables SPL-NAND driver which supports ELM based" - depends on NAND_OMAP_GPMC && !OMAP34XX - default y - help - Hardware ECC correction. This is useful for platforms which have ELM - hardware engine and use NAND boot mode. - Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, - so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling - SPL-NAND driver with software ECC correction support. - -config SPL_NAND_DENALI - bool "Support Denali NAND controller for SPL" - help - This is a small implementation of the Denali NAND controller - for use on SPL. - -config SPL_NAND_SIMPLE - bool "Use simple SPL NAND driver" - depends on !SPL_NAND_AM33XX_BCH - help - Support for NAND boot using simple NAND drivers that - expose the cmd_ctrl() interface. -endif - -endif # if NAND +source "drivers/mtd/nand/raw/Kconfig" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index c61e3f3839..69f40d1563 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,77 +1,2 @@ # SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifdef CONFIG_SPL_BUILD - -ifdef CONFIG_SPL_NAND_DRIVERS -NORMAL_DRIVERS=y -endif - -obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o -obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o -obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o -obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o -obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o -obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o -obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o -obj-$(CONFIG_SPL_NAND_INIT) += nand.o -ifeq ($(CONFIG_SPL_ENV_SUPPORT),y) -obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o -endif - -else # not spl - -NORMAL_DRIVERS=y - -obj-y += nand.o -obj-y += nand_bbt.o -obj-y += nand_ids.o -obj-y += nand_util.o -obj-y += nand_ecc.o -obj-y += nand_base.o -obj-y += nand_timings.o - -endif # not spl - -ifdef NORMAL_DRIVERS - -obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o - -obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o -obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o -obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o -obj-$(CONFIG_NAND_DENALI) += denali.o -obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o -obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o -obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o -obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o -obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o -obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o -obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o -obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o -obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o -obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o -obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o -obj-$(CONFIG_NAND_MXC) += mxc_nand.o -obj-$(CONFIG_NAND_MXS) += mxs_nand.o -obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o -obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o -obj-$(CONFIG_NAND_SPEAR) += spr_nand.o -obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o -obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o -obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o -obj-$(CONFIG_NAND_PLAT) += nand_plat.o -obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o -obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o - -else # minimal SPL drivers - -obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o -obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o -obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o -obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o -obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o - -endif # drivers diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig new file mode 100644 index 0000000000..1e4ea7bdd4 --- /dev/null +++ b/drivers/mtd/nand/raw/Kconfig @@ -0,0 +1,297 @@ + +menuconfig NAND + bool "NAND Device Support" +if NAND + +config SYS_NAND_SELF_INIT + bool + help + This option, if enabled, provides more flexible and linux-like + NAND initialization process. + +config NAND_ATMEL + bool "Support Atmel NAND controller" + imply SYS_NAND_USE_FLASH_BBT + help + Enable this driver for NAND flash platforms using an Atmel NAND + controller. + +config NAND_DAVINCI + bool "Support TI Davinci NAND controller" + help + Enable this driver for NAND flash controllers available in TI Davinci + and Keystone2 platforms + +config NAND_DENALI + bool + select SYS_NAND_SELF_INIT + imply CMD_NAND + +config NAND_DENALI_DT + bool "Support Denali NAND controller as a DT device" + select NAND_DENALI + depends on OF_CONTROL && DM + help + Enable the driver for NAND flash on platforms using a Denali NAND + controller as a DT device. + +config NAND_DENALI_SPARE_AREA_SKIP_BYTES + int "Number of bytes skipped in OOB area" + depends on NAND_DENALI + range 0 63 + help + This option specifies the number of bytes to skip from the beginning + of OOB area before last ECC sector data starts. This is potentially + used to preserve the bad block marker in the OOB area. + +config NAND_LPC32XX_SLC + bool "Support LPC32XX_SLC controller" + help + Enable the LPC32XX SLC NAND controller. + +config NAND_OMAP_GPMC + bool "Support OMAP GPMC NAND controller" + depends on ARCH_OMAP2PLUS + help + Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms. + GPMC controller is used for parallel NAND flash devices, and can + do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8 + and BCH16 ECC algorithms. + +config NAND_OMAP_GPMC_PREFETCH + bool "Enable GPMC Prefetch" + depends on NAND_OMAP_GPMC + default y + help + On OMAP platforms that use the GPMC controller + (CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that + uses the prefetch mode to speed up read operations. + +config NAND_OMAP_ELM + bool "Enable ELM driver for OMAPxx and AMxx platforms." + depends on NAND_OMAP_GPMC && !OMAP34XX + help + ELM controller is used for ECC error detection (not ECC calculation) + of BCH4, BCH8 and BCH16 ECC algorithms. + Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, + thus such SoC platforms need to depend on software library for ECC error + detection. However ECC calculation on such plaforms would still be + done by GPMC controller. + +config NAND_VF610_NFC + bool "Support for Freescale NFC for VF610" + select SYS_NAND_SELF_INIT + imply CMD_NAND + help + Enables support for NAND Flash Controller on some Freescale + processors like the VF610, MCF54418 or Kinetis K70. + The driver supports a maximum 2k page size. The driver + currently does not support hardware ECC. + +choice + prompt "Hardware ECC strength" + depends on NAND_VF610_NFC + default SYS_NAND_VF610_NFC_45_ECC_BYTES + help + Select the ECC strength used in the hardware BCH ECC block. + +config SYS_NAND_VF610_NFC_45_ECC_BYTES + bool "24-error correction (45 ECC bytes)" + +config SYS_NAND_VF610_NFC_60_ECC_BYTES + bool "32-error correction (60 ECC bytes)" + +endchoice + +config NAND_PXA3XX + bool "Support for NAND on PXA3xx and Armada 370/XP/38x" + select SYS_NAND_SELF_INIT + imply CMD_NAND + help + This enables the driver for the NAND flash device found on + PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). + +config NAND_SUNXI + bool "Support for NAND on Allwinner SoCs" + default ARCH_SUNXI + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I + select SYS_NAND_SELF_INIT + select SYS_NAND_U_BOOT_LOCATIONS + select SPL_NAND_SUPPORT + imply CMD_NAND + ---help--- + Enable support for NAND. This option enables the standard and + SPL drivers. + The SPL driver only supports reading from the NAND using DMA + transfers. + +if NAND_SUNXI + +config NAND_SUNXI_SPL_ECC_STRENGTH + int "Allwinner NAND SPL ECC Strength" + default 64 + +config NAND_SUNXI_SPL_ECC_SIZE + int "Allwinner NAND SPL ECC Step Size" + default 1024 + +config NAND_SUNXI_SPL_USABLE_PAGE_SIZE + int "Allwinner NAND SPL Usable Page Size" + default 1024 + +endif + +config NAND_ARASAN + bool "Configure Arasan Nand" + select SYS_NAND_SELF_INIT + imply CMD_NAND + help + This enables Nand driver support for Arasan nand flash + controller. This uses the hardware ECC for read and + write operations. + +config NAND_MXC + bool "MXC NAND support" + depends on CPU_ARM926EJS || CPU_ARM1136 || MX5 + imply CMD_NAND + help + This enables the NAND driver for the NAND flash controller on the + i.MX27 / i.MX31 / i.MX5 rocessors. + +config NAND_MXS + bool "MXS NAND support" + depends on MX23 || MX28 || MX6 || MX7 + select SYS_NAND_SELF_INIT + imply CMD_NAND + select APBH_DMA + select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 + select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 + help + This enables NAND driver for the NAND flash controller on the + MXS processors. + +if NAND_MXS + +config NAND_MXS_DT + bool "Support MXS NAND controller as a DT device" + depends on OF_CONTROL && MTD + help + Enable the driver for MXS NAND flash on platforms using + device tree. + +config NAND_MXS_USE_MINIMUM_ECC + bool "Use minimum ECC strength supported by the controller" + default false + +endif + +config NAND_ZYNQ + bool "Support for Zynq Nand controller" + select SYS_NAND_SELF_INIT + imply CMD_NAND + help + This enables Nand driver support for Nand flash controller + found on Zynq SoC. + +config NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS + bool "Enable use of 1st stage bootloader timing for NAND" + depends on NAND_ZYNQ + help + This flag prevent U-boot reconfigure NAND flash controller and reuse + the NAND timing from 1st stage bootloader. + +comment "Generic NAND options" + +config SYS_NAND_BLOCK_SIZE + hex "NAND chip eraseblock size" + depends on ARCH_SUNXI + help + Number of data bytes in one eraseblock for the NAND chip on the + board. This is the multiple of NAND_PAGE_SIZE and the number of + pages. + +config SYS_NAND_PAGE_SIZE + hex "NAND chip page size" + depends on ARCH_SUNXI + help + Number of data bytes in one page for the NAND chip on the + board, not including the OOB area. + +config SYS_NAND_OOBSIZE + hex "NAND chip OOB size" + depends on ARCH_SUNXI + help + Number of bytes in the Out-Of-Band area for the NAND chip on + the board. + +# Enhance depends when converting drivers to Kconfig which use this config +# option (mxc_nand, ndfc, omap_gpmc). +config SYS_NAND_BUSWIDTH_16BIT + bool "Use 16-bit NAND interface" + depends on NAND_VF610_NFC || NAND_OMAP_GPMC || NAND_MXC || ARCH_DAVINCI + help + Indicates that NAND device has 16-bit wide data-bus. In absence of this + config, bus-width of NAND device is assumed to be either 8-bit and later + determined by reading ONFI params. + Above config is useful when NAND device's bus-width information cannot + be determined from on-chip ONFI params, like in following scenarios: + - SPL boot does not support reading of ONFI parameters. This is done to + keep SPL code foot-print small. + - In current U-Boot flow using nand_init(), driver initialization + happens in board_nand_init() which is called before any device probe + (nand_scan_ident + nand_scan_tail), thus device's ONFI parameters are + not available while configuring controller. So a static CONFIG_NAND_xx + is needed to know the device's bus-width in advance. + +if SPL + +config SYS_NAND_U_BOOT_LOCATIONS + bool "Define U-boot binaries locations in NAND" + help + Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig. + This option should not be enabled when compiling U-boot for boards + defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h + file. + +config SYS_NAND_U_BOOT_OFFS + hex "Location in NAND to read U-Boot from" + default 0x800000 if NAND_SUNXI + depends on SYS_NAND_U_BOOT_LOCATIONS + help + Set the offset from the start of the nand where u-boot should be + loaded from. + +config SYS_NAND_U_BOOT_OFFS_REDUND + hex "Location in NAND to read U-Boot from" + default SYS_NAND_U_BOOT_OFFS + depends on SYS_NAND_U_BOOT_LOCATIONS + help + Set the offset from the start of the nand where the redundant u-boot + should be loaded from. + +config SPL_NAND_AM33XX_BCH + bool "Enables SPL-NAND driver which supports ELM based" + depends on NAND_OMAP_GPMC && !OMAP34XX + default y + help + Hardware ECC correction. This is useful for platforms which have ELM + hardware engine and use NAND boot mode. + Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, + so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling + SPL-NAND driver with software ECC correction support. + +config SPL_NAND_DENALI + bool "Support Denali NAND controller for SPL" + help + This is a small implementation of the Denali NAND controller + for use on SPL. + +config SPL_NAND_SIMPLE + bool "Use simple SPL NAND driver" + depends on !SPL_NAND_AM33XX_BCH + help + Support for NAND boot using simple NAND drivers that + expose the cmd_ctrl() interface. +endif + +endif # if NAND diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile new file mode 100644 index 0000000000..c61e3f3839 --- /dev/null +++ b/drivers/mtd/nand/raw/Makefile @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. + +ifdef CONFIG_SPL_BUILD + +ifdef CONFIG_SPL_NAND_DRIVERS +NORMAL_DRIVERS=y +endif + +obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o +obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o +obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o +obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o +obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o +obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o +obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o +obj-$(CONFIG_SPL_NAND_INIT) += nand.o +ifeq ($(CONFIG_SPL_ENV_SUPPORT),y) +obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o +endif + +else # not spl + +NORMAL_DRIVERS=y + +obj-y += nand.o +obj-y += nand_bbt.o +obj-y += nand_ids.o +obj-y += nand_util.o +obj-y += nand_ecc.o +obj-y += nand_base.o +obj-y += nand_timings.o + +endif # not spl + +ifdef NORMAL_DRIVERS + +obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o + +obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o +obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o +obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o +obj-$(CONFIG_NAND_DENALI) += denali.o +obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o +obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o +obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o +obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o +obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o +obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o +obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o +obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o +obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o +obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o +obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o +obj-$(CONFIG_NAND_MXC) += mxc_nand.o +obj-$(CONFIG_NAND_MXS) += mxs_nand.o +obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o +obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o +obj-$(CONFIG_NAND_SPEAR) += spr_nand.o +obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o +obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o +obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o +obj-$(CONFIG_NAND_PLAT) += nand_plat.o +obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o +obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o + +else # minimal SPL drivers + +obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o +obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o +obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o +obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o +obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o + +endif # drivers diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/raw/am335x_spl_bch.c index ba2f33a96e..ba2f33a96e 100644 --- a/drivers/mtd/nand/am335x_spl_bch.c +++ b/drivers/mtd/nand/raw/am335x_spl_bch.c diff --git a/drivers/mtd/nand/arasan_nfc.c b/drivers/mtd/nand/raw/arasan_nfc.c index 41db9f8bb9..41db9f8bb9 100644 --- a/drivers/mtd/nand/arasan_nfc.c +++ b/drivers/mtd/nand/raw/arasan_nfc.c diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index a5b76e1aa0..a5b76e1aa0 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/raw/atmel_nand_ecc.h index 05eeedb3f8..05eeedb3f8 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/raw/atmel_nand_ecc.h diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index 305e68ad49..e6a84a52b4 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -9,7 +9,7 @@ /* * - * linux/drivers/mtd/nand/nand_davinci.c + * linux/drivers/mtd/nand/raw/nand_davinci.c * * NAND Flash Driver * diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/raw/denali.c index d1cac063f4..d1cac063f4 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/raw/denali.c diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/raw/denali.h index 9b797beffa..9b797beffa 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/raw/denali.h diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index 65a7797f0f..65a7797f0f 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c diff --git a/drivers/mtd/nand/denali_spl.c b/drivers/mtd/nand/raw/denali_spl.c index dbaba3cab2..dbaba3cab2 100644 --- a/drivers/mtd/nand/denali_spl.c +++ b/drivers/mtd/nand/raw/denali_spl.c diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c index 263d46ec8f..263d46ec8f 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/raw/fsl_elbc_spl.c index 30c3308940..30c3308940 100644 --- a/drivers/mtd/nand/fsl_elbc_spl.c +++ b/drivers/mtd/nand/raw/fsl_elbc_spl.c diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index 29f30d8ccc..29f30d8ccc 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c index 7137eb4108..7137eb4108 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c index dfbdbca3ae..dfbdbca3ae 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/raw/fsl_upm.c diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index 1f4c74f0f6..1f4c74f0f6 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c diff --git a/drivers/mtd/nand/kb9202_nand.c b/drivers/mtd/nand/raw/kb9202_nand.c index 0f68f1cd86..0f68f1cd86 100644 --- a/drivers/mtd/nand/kb9202_nand.c +++ b/drivers/mtd/nand/raw/kb9202_nand.c diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/raw/kirkwood_nand.c index 0757fa840b..0757fa840b 100644 --- a/drivers/mtd/nand/kirkwood_nand.c +++ b/drivers/mtd/nand/raw/kirkwood_nand.c diff --git a/drivers/mtd/nand/kmeter1_nand.c b/drivers/mtd/nand/raw/kmeter1_nand.c index 7103300060..7103300060 100644 --- a/drivers/mtd/nand/kmeter1_nand.c +++ b/drivers/mtd/nand/raw/kmeter1_nand.c diff --git a/drivers/mtd/nand/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index 5d4ffea608..5d4ffea608 100644 --- a/drivers/mtd/nand/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c diff --git a/drivers/mtd/nand/lpc32xx_nand_slc.c b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c index 99f6e15f4e..99f6e15f4e 100644 --- a/drivers/mtd/nand/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index cf97e0f74f..cf97e0f74f 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c diff --git a/drivers/mtd/nand/mxc_nand.h b/drivers/mtd/nand/raw/mxc_nand.h index 1c7f3a2e22..1c7f3a2e22 100644 --- a/drivers/mtd/nand/mxc_nand.h +++ b/drivers/mtd/nand/raw/mxc_nand.h diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/raw/mxc_nand_spl.c index 6c03db8428..6c03db8428 100644 --- a/drivers/mtd/nand/mxc_nand_spl.c +++ b/drivers/mtd/nand/raw/mxc_nand_spl.c diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index e3341812a2..e3341812a2 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/raw/mxs_nand.c diff --git a/drivers/mtd/nand/mxs_nand.h b/drivers/mtd/nand/raw/mxs_nand.h index 4bd65cded9..4bd65cded9 100644 --- a/drivers/mtd/nand/mxs_nand.h +++ b/drivers/mtd/nand/raw/mxs_nand.h diff --git a/drivers/mtd/nand/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c index 44dec5dedf..44dec5dedf 100644 --- a/drivers/mtd/nand/mxs_nand_dt.c +++ b/drivers/mtd/nand/raw/mxs_nand_dt.c diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/raw/mxs_nand_spl.c index 2d7bbe83cc..2d7bbe83cc 100644 --- a/drivers/mtd/nand/mxs_nand_spl.c +++ b/drivers/mtd/nand/raw/mxs_nand_spl.c diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/raw/nand.c index bca51ffbf2..bca51ffbf2 100644 --- a/drivers/mtd/nand/nand.c +++ b/drivers/mtd/nand/raw/nand.c diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 92daebe120..92daebe120 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c index ba785c5d53..ba785c5d53 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/raw/nand_bbt.c diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/raw/nand_bch.c index afa0418168..afa0418168 100644 --- a/drivers/mtd/nand/nand_bch.c +++ b/drivers/mtd/nand/raw/nand_bch.c diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/raw/nand_ecc.c index 05e55fce9a..2bc329be1a 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/raw/nand_ecc.c @@ -3,7 +3,7 @@ * This file contains an ECC algorithm from Toshiba that detects and * corrects 1 bit errors in a 256 byte block of data. * - * drivers/mtd/nand/nand_ecc.c + * drivers/mtd/nand/raw/nand_ecc.c * * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com) * Toshiba America Electronics Components, Inc. diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index 4009d64123..4009d64123 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c diff --git a/drivers/mtd/nand/nand_plat.c b/drivers/mtd/nand/raw/nand_plat.c index 335c3e3471..335c3e3471 100644 --- a/drivers/mtd/nand/nand_plat.c +++ b/drivers/mtd/nand/raw/nand_plat.c diff --git a/drivers/mtd/nand/nand_spl_load.c b/drivers/mtd/nand/raw/nand_spl_load.c index ecd373e054..ecd373e054 100644 --- a/drivers/mtd/nand/nand_spl_load.c +++ b/drivers/mtd/nand/raw/nand_spl_load.c diff --git a/drivers/mtd/nand/nand_spl_loaders.c b/drivers/mtd/nand/raw/nand_spl_loaders.c index 177c12b581..177c12b581 100644 --- a/drivers/mtd/nand/nand_spl_loaders.c +++ b/drivers/mtd/nand/raw/nand_spl_loaders.c diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/raw/nand_spl_simple.c index 09e053541a..09e053541a 100644 --- a/drivers/mtd/nand/nand_spl_simple.c +++ b/drivers/mtd/nand/raw/nand_spl_simple.c diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c index c0545a4fb1..c0545a4fb1 100644 --- a/drivers/mtd/nand/nand_timings.c +++ b/drivers/mtd/nand/raw/nand_timings.c diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/raw/nand_util.c index 1ded7aa920..fc2235c1a0 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/raw/nand_util.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/mtd/nand/nand_util.c + * drivers/mtd/nand/raw/nand_util.c * * Copyright (C) 2006 by Weiss-Electronic GmbH. * All rights reserved. diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c index 35c6dd1f1b..35c6dd1f1b 100644 --- a/drivers/mtd/nand/omap_elm.c +++ b/drivers/mtd/nand/raw/omap_elm.c diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index 6a050501b0..6a050501b0 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c index 2a02a9d58e..4c783f1e1e 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/raw/pxa3xx_nand.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/mtd/nand/pxa3xx_nand.c + * drivers/mtd/nand/raw/pxa3xx_nand.c * * Copyright © 2005 Intel Corporation * Copyright © 2006 Marvell International Ltd. diff --git a/drivers/mtd/nand/pxa3xx_nand.h b/drivers/mtd/nand/raw/pxa3xx_nand.h index 8f24ae6d18..8f24ae6d18 100644 --- a/drivers/mtd/nand/pxa3xx_nand.h +++ b/drivers/mtd/nand/raw/pxa3xx_nand.h diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c index 3ccb168d13..3ccb168d13 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/raw/sunxi_nand.c diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/raw/sunxi_nand_spl.c index 6cde9814c4..6cde9814c4 100644 --- a/drivers/mtd/nand/sunxi_nand_spl.c +++ b/drivers/mtd/nand/raw/sunxi_nand_spl.c diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c index 74acdfb308..74acdfb308 100644 --- a/drivers/mtd/nand/tegra_nand.c +++ b/drivers/mtd/nand/raw/tegra_nand.c diff --git a/drivers/mtd/nand/tegra_nand.h b/drivers/mtd/nand/raw/tegra_nand.h index 7740160661..7740160661 100644 --- a/drivers/mtd/nand/tegra_nand.h +++ b/drivers/mtd/nand/raw/tegra_nand.h diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c index 619d0403e9..619d0403e9 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/raw/vf610_nfc.c diff --git a/drivers/mtd/nand/zynq_nand.c b/drivers/mtd/nand/raw/zynq_nand.c index e932a58bf6..e932a58bf6 100644 --- a/drivers/mtd/nand/zynq_nand.c +++ b/drivers/mtd/nand/raw/zynq_nand.c diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 884dd4125e..5b5c38f2c9 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -240,7 +240,7 @@ /* LB refresh timer prescal, 266MHz/32 */ #define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */ -/* drivers/mtd/nand/nand.c */ +/* drivers/mtd/nand/raw/nand.c */ #if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_NAND_BASE 0xFFF00000 #else |