diff options
27 files changed, 1070 insertions, 418 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 3a4a304e45..caee7263b1 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -26,7 +26,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)libomap-common.a SOBJS := reset.o + COBJS := timer.o +COBJS += syslib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/armv7/omap-common/reset.S b/arch/arm/cpu/armv7/omap-common/reset.S index a53c408195..838b1221ee 100644 --- a/arch/arm/cpu/armv7/omap-common/reset.S +++ b/arch/arm/cpu/armv7/omap-common/reset.S @@ -27,10 +27,12 @@ reset_cpu: ldr r1, rstctl @ get addr for global reset @ reg - mov r3, #0x2 @ full reset pll + mpu + ldr r3, rstbit @ sw reset bit str r3, [r1] @ force reset mov r0, r0 _loop_forever: b _loop_forever rstctl: .word PRM_RSTCTRL +rstbit: + .word PRM_RSTCTRL_RESET diff --git a/arch/arm/cpu/armv7/omap3/syslib.c b/arch/arm/cpu/armv7/omap-common/syslib.c index 9ced495c8d..f9ed9a307b 100644 --- a/arch/arm/cpu/armv7/omap3/syslib.c +++ b/arch/arm/cpu/armv7/omap-common/syslib.c @@ -23,8 +23,6 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> #include <asm/arch/sys_proto.h> /************************************************************ diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index 79ae26706e..95526d6893 100644 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -32,7 +32,6 @@ COBJS += board.o COBJS += clock.o COBJS += gpio.o COBJS += mem.o -COBJS += syslib.o COBJS += sys_info.o COBJS-$(CONFIG_EMIF4) += emif4.o diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 69e56f55c5..6c2a132b63 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -120,41 +120,6 @@ void secureworld_exit() } /****************************************************************************** - * Routine: setup_auxcr() - * Description: Write to AuxCR desired value using SMI. - * general use. - *****************************************************************************/ -void setup_auxcr() -{ - unsigned long i; - volatile unsigned int j; - /* Save r0, r12 and restore them after usage */ - __asm__ __volatile__("mov %0, r12":"=r"(j)); - __asm__ __volatile__("mov %0, r0":"=r"(i)); - - /* - * GP Device ROM code API usage here - * r12 = AUXCR Write function and r0 value - */ - __asm__ __volatile__("mov r12, #0x3"); - __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); - /* Enabling ASA */ - __asm__ __volatile__("orr r0, r0, #0x10"); - /* Enable L1NEON */ - __asm__ __volatile__("orr r0, r0, #1 << 5"); - /* SMI instruction to call ROM Code API */ - __asm__ __volatile__(".word 0xE1600070"); - /* Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround) */ - __asm__ __volatile__("mov r12, #0x2"); - __asm__ __volatile__("mrc p15, 1, r0, c9, c0, 2"); - __asm__ __volatile__("orr r0, r0, #1 << 27"); - /* SMI instruction to call ROM Code API */ - __asm__ __volatile__(".word 0xE1600070"); - __asm__ __volatile__("mov r0, %0":"=r"(i)); - __asm__ __volatile__("mov r12, %0":"=r"(j)); -} - -/****************************************************************************** * Routine: try_unlock_sram() * Description: If chip is GP/EMU(special) type, unlock the SRAM for * general use. diff --git a/arch/arm/cpu/armv7/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S index 4b65ac58a5..24e950f38c 100644 --- a/arch/arm/cpu/armv7/omap3/cache.S +++ b/arch/arm/cpu/armv7/omap3/cache.S @@ -43,6 +43,7 @@ .global invalidate_dcache .global l2_cache_enable .global l2_cache_disable +.global setup_auxcr /* * invalidate_dcache() @@ -128,64 +129,56 @@ finished_inval: ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} - -l2_cache_enable: - stmfd r13!, {r0, r1, r2, lr} - @ ES2 onwards we can disable/enable L2 ourselves +l2_cache_set: + stmfd r13!, {r4 - r6, lr} + mov r5, r0 bl get_cpu_rev - cmp r0, #CPU_3XX_ES20 - blt l2_cache_disable_EARLIER_THAN_ES2 - mrc 15, 0, r3, cr1, cr0, 1 - orr r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - b l2_cache_enable_END -l2_cache_enable_EARLIER_THAN_ES2: - @ Save r0, r12 and restore them after usage - mov r3, ip - str r3, [sp, #4] - mov r3, r0 - @ + mov r4, r0 + bl get_cpu_family + @ ES2 onwards we can disable/enable L2 ourselves + cmp r0, #CPU_OMAP34XX + cmpeq r4, #CPU_3XX_ES10 + mrc 15, 0, r0, cr1, cr0, 1 + bic r0, r0, #2 + orr r0, r0, r5, lsl #1 + mcreq 15, 0, r0, cr1, cr0, 1 @ GP Device ROM code API usage here @ r12 = AUXCR Write function and r0 value - @ mov ip, #3 - mrc 15, 0, r0, cr1, cr0, 1 - orr r0, r0, #2 - @ SMI instruction to call ROM Code API - .word 0xe1600070 - mov r0, r3 - mov ip, r3 - str r3, [sp, #4] -l2_cache_enable_END: - ldmfd r13!, {r1, r2, r3, pc} + @ SMCNE instruction to call ROM Code API + .word 0x11600070 + ldmfd r13!, {r4 - r6, pc} +l2_cache_enable: + mov r0, #1 + b l2_cache_set l2_cache_disable: - stmfd r13!, {r0, r1, r2, lr} - @ ES2 onwards we can disable/enable L2 ourselves - bl get_cpu_rev - cmp r0, #CPU_3XX_ES20 - blt l2_cache_disable_EARLIER_THAN_ES2 - mrc 15, 0, r3, cr1, cr0, 1 - bic r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - b l2_cache_disable_END -l2_cache_disable_EARLIER_THAN_ES2: - @ Save r0, r12 and restore them after usage - mov r3, ip - str r3, [sp, #4] - mov r3, r0 - @ - @ GP Device ROM code API usage here - @ r12 = AUXCR Write function and r0 value - @ - mov ip, #3 - mrc 15, 0, r0, cr1, cr0, 1 - bic r0, r0, #2 - @ SMI instruction to call ROM Code API - .word 0xe1600070 - mov r0, r3 - mov ip, r3 - str r3, [sp, #4] -l2_cache_disable_END: - ldmfd r13!, {r1, r2, r3, pc} + mov r0, #0 + b l2_cache_set + +/****************************************************************************** + * Routine: setup_auxcr() + * Description: Write to AuxCR desired value using SMI. + * general use. + *****************************************************************************/ +setup_auxcr: + mrc p15, 0, r0, c0, c0, 0 @ read main ID register + and r2, r0, #0x00f00000 @ variant + and r3, r0, #0x0000000f @ revision + orr r1, r3, r2, lsr #20-4 @ combine variant and revision + mov r12, #0x3 + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #0x10 @ Enable ASA + @ Enable L1NEON on pre-r2p1 (erratum 621766 workaround) + cmp r1, #0x21 + orrlt r0, r0, #1 << 5 + .word 0xE1600070 @ SMC + mov r12, #0x2 + mrc p15, 1, r0, c9, c0, 2 + @ Set PLD_FWD bit in L2AUXCR on pre-r2p1 (erratum 725233 workaround) + cmp r1, #0x21 + orrlt r0, r0, #1 << 27 + .word 0xE1600070 @ SMC + bx lr + diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 6330c9e5da..2238c52e3b 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -50,12 +50,7 @@ u32 get_osc_clk_speed(void) if (val & SYSCLKDIV_2) cdiv = 2; - else if (val & SYSCLKDIV_1) - cdiv = 1; else - /* - * Should never reach here! (Assume divider as 1) - */ cdiv = 1; /* enable timer2 */ @@ -89,11 +84,7 @@ u32 get_osc_clk_speed(void) while (readl(&s32k_base->s32k_cr) < (start + 20)) ; cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */ cdiff = cend - cstart; /* get elapsed ticks */ - - if (cdiv == 2) - { - cdiff *= 2; - } + cdiff *= cdiv; /* based on number of ticks assign speed */ if (cdiff > 19000) @@ -135,65 +126,22 @@ void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) } } -/****************************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * called from SRAM, or Flash (using temp SRAM stack). - *****************************************************************************/ -void prcm_init(void) +/* + * OMAP34XX/35XX specific functions + */ + +static void dpll3_init_34xx(u32 sil_index, u32 clk_index) { + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_core_dpll_param(); void (*f_lock_pll) (u32, u32, u32, u32); int xip_safe, p0, p1, p2, p3; - u32 osc_clk = 0, sys_clkin_sel; - u32 clk_index, sil_index = 0; - struct prm *prm_base = (struct prm *)PRM_BASE; - struct prcm *prcm_base = (struct prcm *)PRCM_BASE; - dpll_param *dpll_param_p; - - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); xip_safe = is_running_in_sram(); - /* - * Gauge the input clock speed and find out the sys_clkin_sel - * value corresponding to the input clock. - */ - osc_clk = get_osc_clk_speed(); - get_sys_clkin_sel(osc_clk, &sys_clkin_sel); - - /* set input crystal speed */ - sr32(&prm_base->clksel, 0, 3, sys_clkin_sel); + /* Moving to the right sysclk and ES rev base */ + ptr = ptr + (3 * clk_index) + sil_index; - /* If the input clock is greater than 19.2M always divide/2 */ - if (sys_clkin_sel > 2) { - /* input clock divider */ - sr32(&prm_base->clksrc_ctrl, 6, 2, 2); - clk_index = sys_clkin_sel / 2; - } else { - /* input clock divider */ - sr32(&prm_base->clksrc_ctrl, 6, 2, 1); - clk_index = sys_clkin_sel; - } - - /* - * The DPLL tables are defined according to sysclk value and - * silicon revision. The clk_index value will be used to get - * the values for that input sysclk from the DPLL param table - * and sil_index will get the values for that SysClk for the - * appropriate silicon rev. - */ - if (get_cpu_rev()) - sil_index = 1; - - /* Unlock MPU DPLL (slows things down, and needed later) */ - sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); - wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY); - - /* Getting the base address of Core DPLL param table */ - dpll_param_p = (dpll_param *) get_core_dpll_param(); - - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; if (xip_safe) { /* * CORE DPLL @@ -208,34 +156,38 @@ void prcm_init(void) * work. write another value and then default value. */ - /* m3x2 */ - sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1); - /* m3x2 */ + /* CM_CLKSEL1_EMU[DIV_DPLL3] */ + sr32(&prcm_base->clksel1_emu, 16, 5, (CORE_M3X2 + 1)) ; sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2); - /* Set M2 */ - sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2); - /* Set M */ - sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m); - /* Set N */ - sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n); - /* 96M Src */ + + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2); + + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m); + + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n); + + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ sr32(&prcm_base->clksel1_pll, 6, 1, 0); - /* ssi */ + + /* SSI */ sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV); - /* fsusb */ + /* FSUSB */ sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV); - /* l4 */ + /* L4 */ sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV); - /* l3 */ + /* L3 */ sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); - /* gfx */ - sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); - /* reset mgr */ + /* GFX */ + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); + /* RESET MGR */ sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); - /* FREQSEL */ - sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel); - /* lock mode */ - sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel); + /* LOCK MODE */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, LDELAY); @@ -244,102 +196,405 @@ void prcm_init(void) * if running from flash, jump to small relocated code * area in SRAM. */ + f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + + SRAM_VECT_CODE); + p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); - sr32(&p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&p0, 4, 4, ptr->fsel); p1 = readl(&prcm_base->clksel1_pll); - sr32(&p1, 27, 2, dpll_param_p->m2); /* Set M2 */ - sr32(&p1, 16, 11, dpll_param_p->m); /* Set M */ - sr32(&p1, 8, 7, dpll_param_p->n); /* Set N */ - sr32(&p1, 6, 1, 0); /* set source for 96M */ + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&p1, 27, 5, ptr->m2); + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&p1, 16, 11, ptr->m); + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&p1, 8, 7, ptr->n); + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&p1, 6, 1, 0); p2 = readl(&prcm_base->clksel_core); - sr32(&p2, 8, 4, CORE_SSI_DIV); /* ssi */ - sr32(&p2, 4, 2, CORE_FUSB_DIV); /* fsusb */ - sr32(&p2, 2, 2, CORE_L4_DIV); /* l4 */ - sr32(&p2, 0, 2, CORE_L3_DIV); /* l3 */ + /* SSI */ + sr32(&p2, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&p2, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&p2, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&p2, 0, 2, CORE_L3_DIV); p3 = (u32)&prcm_base->idlest_ckgen; (*f_lock_pll) (p0, p1, p2, p3); } +} - /* PER DPLL */ - sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); - wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); - - /* Getting the base address to PER DPLL param table */ - - /* Set N */ - dpll_param_p = (dpll_param *) get_per_dpll_param(); +static void dpll4_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_per_dpll_param(); /* Moving it to the right sysclk base */ - dpll_param_p = dpll_param_p + clk_index; + ptr = ptr + clk_index; + + /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); + wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); /* * Errata 1.50 Workaround for OMAP3 ES1.0 only * If using default divisors, write default divisor + 1 * and then the actual divisor value */ - sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1); /* set M6 */ - sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); /* set M6 */ - sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1); /* set M5 */ - sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); /* set M5 */ - sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1); /* set M4 */ - sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); /* set M4 */ - sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1); /* set M3 */ - sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); /* set M3 */ - sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */ - sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2); /* set M2 */ + /* M6 */ + sr32(&prcm_base->clksel1_emu, 24, 5, (PER_M6X2 + 1)); + sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); + /* M5 */ + sr32(&prcm_base->clksel_cam, 0, 5, (PER_M5X2 + 1)); + sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); + /* M4 */ + sr32(&prcm_base->clksel_dss, 0, 5, (PER_M4X2 + 1)); + sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); + /* M3 */ + sr32(&prcm_base->clksel_dss, 8, 5, (PER_M3X2 + 1)); + sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); + /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */ + sr32(&prcm_base->clksel3_pll, 0, 5, (ptr->m2 + 1)); + sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2); /* Workaround end */ - sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m); /* set m */ - sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n); /* set n */ - sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel); /* FREQSEL */ - sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); /* lock mode */ + /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */ + sr32(&prcm_base->clksel2_pll, 8, 11, ptr->m); + + /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */ + sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n); + + /* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */ + sr32(&prcm_base->clken_pll, 20, 4, ptr->fsel); + + /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); +} - /* Getting the base address to MPU DPLL param table */ - dpll_param_p = (dpll_param *) get_mpu_dpll_param(); +static void mpu_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_mpu_dpll_param(); - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* Moving to the right sysclk and ES rev base */ + ptr = ptr + (3 * clk_index) + sil_index; /* MPU DPLL (unlocked already) */ - /* Set M2 */ - sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2); - /* Set M */ - sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m); - /* Set N */ - sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n); - /* FREQSEL */ - sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel); - /* lock mode */ - sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); - wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY); - - /* Getting the base address to IVA DPLL param table */ - dpll_param_p = (dpll_param *) get_iva_dpll_param(); - - /* Moving it to the right sysclk and ES rev base */ - dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; - - /* IVA DPLL (set to 12*20=240MHz) */ + /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */ + sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2); + + /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */ + sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m); + + /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */ + sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n); + + /* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */ + sr32(&prcm_base->clken_pll_mpu, 4, 4, ptr->fsel); +} + +static void iva_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_iva_dpll_param(); + + /* Moving to the right sysclk and ES rev base */ + ptr = ptr + (3 * clk_index) + sil_index; + + /* IVA DPLL */ + /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP); + wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); + + /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */ + sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2); + + /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */ + sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m); + + /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */ + sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n); + + /* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */ + sr32(&prcm_base->clken_pll_iva2, 4, 4, ptr->fsel); + + /* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK); + + wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); +} + +/* + * OMAP3630 specific functions + */ + +static void dpll3_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param(); + void (*f_lock_pll) (u32, u32, u32, u32); + int xip_safe, p0, p1, p2, p3; + + xip_safe = is_running_in_sram(); + + /* Moving it to the right sysclk base */ + ptr += clk_index; + + if (xip_safe) { + /* CORE DPLL */ + + /* Select relock bypass: CM_CLKEN_PLL[0:2] */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, + LDELAY); + + /* CM_CLKSEL1_EMU[DIV_DPLL3] */ + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2); + + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2); + + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m); + + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n); + + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&prcm_base->clksel1_pll, 6, 1, 0); + + /* SSI */ + sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); + /* GFX */ + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); + /* RESET MGR */ + sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel); + /* LOCK MODE */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); + + wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, + LDELAY); + } else if (is_running_in_flash()) { + /* + * if running from flash, jump to small relocated code + * area in SRAM. + */ + f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + + SRAM_VECT_CODE); + + p0 = readl(&prcm_base->clken_pll); + sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&p0, 4, 4, ptr->fsel); + + p1 = readl(&prcm_base->clksel1_pll); + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&p1, 27, 5, ptr->m2); + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&p1, 16, 11, ptr->m); + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&p1, 8, 7, ptr->n); + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&p1, 6, 1, 0); + + p2 = readl(&prcm_base->clksel_core); + /* SSI */ + sr32(&p2, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&p2, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&p2, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&p2, 0, 2, CORE_L3_DIV); + + p3 = (u32)&prcm_base->idlest_ckgen; + + (*f_lock_pll) (p0, p1, p2, p3); + } +} + +static void dpll4_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + struct dpll_per_36x_param *ptr; + + ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr += clk_index; + + /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); + wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); + + /* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */ + sr32(&prcm_base->clksel1_emu, 24, 6, ptr->m6); + + /* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */ + sr32(&prcm_base->clksel_cam, 0, 6, ptr->m5); + + /* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */ + sr32(&prcm_base->clksel_dss, 0, 6, ptr->m4); + + /* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */ + sr32(&prcm_base->clksel_dss, 8, 6, ptr->m3); + + /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */ + sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2); + + /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */ + sr32(&prcm_base->clksel2_pll, 8, 12, ptr->m); + + /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */ + sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n); + + /* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */ + sr32(&prcm_base->clksel_core, 12, 2, ptr->m2div); + + /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); + wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); +} + +static void mpu_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param(); + + /* Moving to the right sysclk */ + ptr += clk_index; + + /* MPU DPLL (unlocked already */ + + /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */ + sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2); + + /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */ + sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m); + + /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */ + sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n); +} + +static void iva_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param(); + + /* Moving to the right sysclk */ + ptr += clk_index; + + /* IVA DPLL */ + /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */ sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP); wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); - /* set M2 */ - sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2); - /* set M */ - sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m); - /* set N */ - sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n); - /* FREQSEL */ - sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel); - /* lock mode */ + + /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */ + sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2); + + /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */ + sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m); + + /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */ + sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n); + + /* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */ sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK); + wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + u32 clk_index, sil_index = 0; + struct prm *prm_base = (struct prm *)PRM_BASE; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* + * Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + /* set input crystal speed */ + sr32(&prm_base->clksel, 0, 3, sys_clkin_sel); + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 2); + clk_index = sys_clkin_sel / 2; + } else { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 1); + clk_index = sys_clkin_sel; + } + + if (get_cpu_family() == CPU_OMAP36XX) { + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, + LDELAY); + + dpll3_init_36xx(0, clk_index); + dpll4_init_36xx(0, clk_index); + iva_init_36xx(0, clk_index); + mpu_init_36xx(0, clk_index); + + /* Lock MPU DPLL to set frequency */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); + wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, + LDELAY); + } else { + /* + * The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if (((get_cpu_family() == CPU_OMAP34XX) + && (get_cpu_rev() >= CPU_3XX_ES20)) || + (get_cpu_family() == CPU_AM35XX)) + sil_index = 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, + LDELAY); + + dpll3_init_34xx(sil_index, clk_index); + dpll4_init_34xx(sil_index, clk_index); + iva_init_34xx(sil_index, clk_index); + mpu_init_34xx(sil_index, clk_index); + + /* Lock MPU DPLL to set frequency */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); + wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, + LDELAY); + } /* Set up GPTimers to sys_clk source only */ sr32(&prcm_base->clksel_per, 0, 8, 0xff); diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 73063ec8e6..91c6dbcc09 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -359,3 +359,72 @@ per_dpll_param: get_per_dpll_param: adr r0, per_dpll_param mov pc, lr + +/* + * Tables for 36XX/37XX devices + * + */ +mpu_36x_dpll_param: +/* 12MHz */ +.word 50, 0, 0, 1 +/* 13MHz */ +.word 600, 12, 0, 1 +/* 19.2MHz */ +.word 125, 3, 0, 1 +/* 26MHz */ +.word 300, 12, 0, 1 +/* 38.4MHz */ +.word 125, 7, 0, 1 + +iva_36x_dpll_param: +/* 12MHz */ +.word 130, 2, 0, 1 +/* 13MHz */ +.word 20, 0, 0, 1 +/* 19.2MHz */ +.word 325, 11, 0, 1 +/* 26MHz */ +.word 10, 0, 0, 1 +/* 38.4MHz */ +.word 325, 23, 0, 1 + +core_36x_dpll_param: +/* 12MHz */ +.word 100, 2, 0, 1 +/* 13MHz */ +.word 400, 12, 0, 1 +/* 19.2MHz */ +.word 375, 17, 0, 1 +/* 26MHz */ +.word 200, 12, 0, 1 +/* 38.4MHz */ +.word 375, 35, 0, 1 + +per_36x_dpll_param: +/* SYSCLK M N M2 M3 M4 M5 M6 m2DIV */ +.word 12000, 360, 4, 9, 16, 5, 4, 3, 1 +.word 13000, 864, 12, 9, 16, 9, 4, 3, 1 +.word 19200, 360, 7, 9, 16, 5, 4, 3, 1 +.word 26000, 432, 12, 9, 16, 9, 4, 3, 1 +.word 38400, 360, 15, 9, 16, 5, 4, 3, 1 + +.globl get_36x_mpu_dpll_param +get_36x_mpu_dpll_param: + adr r0, mpu_36x_dpll_param + mov pc, lr + +.globl get_36x_iva_dpll_param +get_36x_iva_dpll_param: + adr r0, iva_36x_dpll_param + mov pc, lr + +.globl get_36x_core_dpll_param +get_36x_core_dpll_param: + adr r0, core_36x_dpll_param + mov pc, lr + +.globl get_36x_per_dpll_param +get_36x_per_dpll_param: + adr r0, per_36x_dpll_param + mov pc, lr + diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 96fd990c71..8905224439 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -107,18 +107,12 @@ u32 get_sdr_cs_offset(u32 cs) /* * do_sdrc_init - * - Initialize the SDRAM for use. - * - Sets up SDRC timings for CS0 * - code called once in C-Stack only context for CS0 and a possible 2nd * time depending on memory configuration from stack+global context */ void do_sdrc_init(u32 cs, u32 early) { - struct sdrc_actim *sdrc_actim_base; - - if (cs) - sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; - else - sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; if (early) { /* reset sdrc controller */ @@ -138,24 +132,29 @@ void do_sdrc_init(u32 cs, u32 early) sdelay(0x20000); } - writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY | - RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 | - DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg); - writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl); - writel(V_ACTIMA_165, &sdrc_actim_base->ctrla); - writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb); - - writel(CMD_NOP, &sdrc_base->cs[cs].manual); - writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - /* - * CAS latency 3, Write Burst = Read Burst, Serial Mode, - * Burst length = 4 + * SDRC timings are set up by x-load or config header + * We don't need to redo them here. + * Older x-loads configure only CS0 + * configure CS1 to handle this ommission */ - writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr); + if (cs) { + sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + writel(readl(&sdrc_base->cs[CS0].mcfg), + &sdrc_base->cs[CS1].mcfg); + writel(readl(&sdrc_base->cs[CS0].rfr_ctrl), + &sdrc_base->cs[CS1].rfr_ctrl); + writel(readl(&sdrc_actim_base0->ctrla), + &sdrc_actim_base1->ctrla); + writel(readl(&sdrc_actim_base0->ctrlb), + &sdrc_actim_base1->ctrlb); + } + /* + * Test ram in this bank + * Disable if bad or not present + */ if (!mem_ok(cs)) writel(0, &sdrc_base->cs[cs].mcfg); } diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c index 1df4401d49..549ac19189 100644 --- a/arch/arm/cpu/armv7/omap3/sys_info.c +++ b/arch/arm/cpu/armv7/omap3/sys_info.c @@ -38,7 +38,10 @@ static char *rev_s[CPU_3XX_MAX_REV] = { "2.0", "2.1", "3.0", - "3.1"}; + "3.1", + "UNKNOWN", + "UNKNOWN", + "3.1.2"}; /***************************************************************** * dieid_num_r(void) - read and set die ID @@ -75,32 +78,81 @@ u32 get_cpu_type(void) } /****************************************** - * get_cpu_rev(void) - extract version info + * get_cpu_id(void) - extract cpu id + * returns 0 for ES1.0, cpuid otherwise ******************************************/ -u32 get_cpu_rev(void) +u32 get_cpu_id(void) { - u32 cpuid = 0; struct ctrl_id *id_base; + u32 cpuid = 0; /* * On ES1.0 the IDCODE register is not exposed on L4 * so using CPU ID to differentiate between ES1.0 and > ES1.0. */ __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); - if ((cpuid & 0xf) == 0x0) - return CPU_3XX_ES10; - else { + if ((cpuid & 0xf) == 0x0) { + return 0; + } else { /* Decode the IDs on > ES1.0 */ id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE; - cpuid = (readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf; + cpuid = readl(&id_base->idcode); + } - /* Some early ES2.0 seem to report ID 0, fix this */ - if(cpuid == 0) - cpuid = CPU_3XX_ES20; + return cpuid; +} - return cpuid; +/****************************************** + * get_cpu_family(void) - extract cpu info + ******************************************/ +u32 get_cpu_family(void) +{ + u16 hawkeye; + u32 cpu_family; + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_OMAP34XX; + + hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff; + switch (hawkeye) { + case HAWKEYE_OMAP34XX: + cpu_family = CPU_OMAP34XX; + break; + case HAWKEYE_AM35XX: + cpu_family = CPU_AM35XX; + break; + case HAWKEYE_OMAP36XX: + cpu_family = CPU_OMAP36XX; + break; + default: + cpu_family = CPU_OMAP34XX; } + + return cpu_family; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_3XX_ES10; + else + return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf; +} + +/***************************************************************** + * get_sku_id(void) - read sku_id to get info on max clock rate + *****************************************************************/ +u32 get_sku_id(void) +{ + struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; + return readl(&id_base->sku_id) & SKUID_CLK_MASK; } /*************************************************************************** @@ -213,24 +265,66 @@ u32 get_device_type(void) */ int print_cpuinfo (void) { - char *cpu_s, *sec_s; + char *cpu_family_s, *cpu_s, *sec_s, *max_clk; + + switch (get_cpu_family()) { + case CPU_OMAP34XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3503: + cpu_s = "3503"; + break; + case OMAP3515: + cpu_s = "3515"; + break; + case OMAP3525: + cpu_s = "3525"; + break; + case OMAP3530: + cpu_s = "3530"; + break; + default: + cpu_s = "35XX"; + break; + } + if ((get_cpu_rev() >= CPU_3XX_ES31) && + (get_sku_id() == SKUID_CLK_720MHZ)) + max_clk = "720 mHz"; + else + max_clk = "600 mHz"; - switch (get_cpu_type()) { - case OMAP3503: - cpu_s = "3503"; break; - case OMAP3515: - cpu_s = "3515"; + case CPU_AM35XX: + cpu_family_s = "AM"; + switch (get_cpu_type()) { + case AM3505: + cpu_s = "3505"; + break; + case AM3517: + cpu_s = "3517"; + break; + default: + cpu_s = "35XX"; + break; + } + max_clk = "600 Mhz"; break; - case OMAP3525: - cpu_s = "3525"; - break; - case OMAP3530: - cpu_s = "3530"; + case CPU_OMAP36XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3730: + cpu_s = "3630/3730"; + break; + default: + cpu_s = "36XX/37XX"; + break; + } + max_clk = "1 Ghz"; break; default: + cpu_family_s = "OMAP"; cpu_s = "35XX"; - break; + max_clk = "600 Mhz"; } switch (get_device_type()) { @@ -250,8 +344,9 @@ int print_cpuinfo (void) sec_s = "?"; } - printf("OMAP%s-%s ES%s, CPU-OPP2 L3-165MHz\n", - cpu_s, sec_s, rev_s[get_cpu_rev()]); + printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n", + cpu_family_s, cpu_s, sec_s, + rev_s[get_cpu_rev()], max_clk); return 0; } diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clocks.h index 71a0cb6ae4..40f80baf61 100644 --- a/arch/arm/include/asm/arch-omap3/clocks.h +++ b/arch/arm/include/asm/arch-omap3/clocks.h @@ -51,12 +51,29 @@ typedef struct { unsigned int m2; } dpll_param; +struct dpll_per_36x_param { + unsigned int sys_clk; + unsigned int m; + unsigned int n; + unsigned int m2; + unsigned int m3; + unsigned int m4; + unsigned int m5; + unsigned int m6; + unsigned int m2div; +}; + /* Following functions are exported from lowlevel_init.S */ extern dpll_param *get_mpu_dpll_param(void); extern dpll_param *get_iva_dpll_param(void); extern dpll_param *get_core_dpll_param(void); extern dpll_param *get_per_dpll_param(void); +extern dpll_param *get_36x_mpu_dpll_param(void); +extern dpll_param *get_36x_iva_dpll_param(void); +extern dpll_param *get_36x_core_dpll_param(void); +extern dpll_param *get_36x_per_dpll_param(void); + extern void *_end_vect, *_start; #endif diff --git a/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/arch/arm/include/asm/arch-omap3/clocks_omap3.h index 661407b564..30ef690fa2 100644 --- a/arch/arm/include/asm/arch-omap3/clocks_omap3.h +++ b/arch/arm/include/asm/arch-omap3/clocks_omap3.h @@ -282,4 +282,31 @@ #define PER_FSEL_38P4 0x07 #define PER_M2_38P4 0x09 +/* 36XX PER DPLL */ + +#define PER_36XX_M_12 0x1B0 +#define PER_36XX_N_12 0x05 +#define PER_36XX_FSEL_12 0x07 +#define PER_36XX_M2_12 0x09 + +#define PER_36XX_M_13 0x360 +#define PER_36XX_N_13 0x0C +#define PER_36XX_FSEL_13 0x03 +#define PER_36XX_M2_13 0x09 + +#define PER_36XX_M_19P2 0x1C2 +#define PER_36XX_N_19P2 0x09 +#define PER_36XX_FSEL_19P2 0x07 +#define PER_36XX_M2_19P2 0x09 + +#define PER_36XX_M_26 0x1B0 +#define PER_36XX_N_26 0x0C +#define PER_36XX_FSEL_26 0x07 +#define PER_36XX_M2_26 0x09 + +#define PER_36XX_M_38P4 0x1C2 +#define PER_36XX_N_38P4 0x13 +#define PER_36XX_FSEL_38P4 0x07 +#define PER_36XX_M2_38P4 0x09 + #endif /* endif _CLOCKS_OMAP3_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 390b007945..962d6d40aa 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -60,19 +60,14 @@ struct ctrl { #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ -/* cpu type */ -#define OMAP3503 0x5c00 -#define OMAP3515 0x1c00 -#define OMAP3525 0x4c00 -#define OMAP3530 0x0c00 - #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ struct ctrl_id { u8 res1[0x4]; u32 idcode; /* 0x04 */ u32 prod_id; /* 0x08 */ - u8 res2[0x0C]; + u32 sku_id; /* 0x0c */ + u8 res2[0x08]; u32 die_id_0; /* 0x18 */ u32 die_id_1; /* 0x1C */ u32 die_id_2; /* 0x20 */ @@ -89,6 +84,11 @@ struct ctrl_id { #define HS_DEVICE 0x2 #define GP_DEVICE 0x3 +/* device speed */ +#define SKUID_CLK_MASK 0xf +#define SKUID_CLK_600MHZ 0x0 +#define SKUID_CLK_720MHZ 0x8 + #define GPMC_BASE (OMAP34XX_GPMC_BASE) #define GPMC_CONFIG_CS0 0x60 #define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0) @@ -419,6 +419,7 @@ struct prm { }; #else /* __ASSEMBLY__ */ #define PRM_RSTCTRL 0x48307250 +#define PRM_RSTCTRL_RESET 0x04 #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 12815f694f..3957c796f2 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -176,11 +176,41 @@ struct gpio { #define CPU_3XX_ES21 2 #define CPU_3XX_ES30 3 #define CPU_3XX_ES31 4 -#define CPU_3XX_MAX_REV (CPU_3XX_ES31 + 1) +#define CPU_3XX_ES312 7 +#define CPU_3XX_MAX_REV 8 #define CPU_3XX_ID_SHIFT 28 #define WIDTH_8BIT 0x0000 #define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ +/* + * Hawkeye values + */ +#define HAWKEYE_OMAP34XX 0xb7ae +#define HAWKEYE_AM35XX 0xb868 +#define HAWKEYE_OMAP36XX 0xb891 + +#define HAWKEYE_SHIFT 12 + +/* + * Define CPU families + */ +#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */ +#define CPU_AM35XX 0x3500 /* AM35xx devices */ +#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */ + +/* + * Control status register values corresponding to cpu variants + */ +#define OMAP3503 0x5c00 +#define OMAP3515 0x1c00 +#define OMAP3525 0x4c00 +#define OMAP3530 0x0c00 + +#define AM3505 0x5c00 +#define AM3517 0x1c00 + +#define OMAP3730 0x0c00 + #endif diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index db7b42aed1..4a28ba1c4a 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -41,7 +41,9 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, void watchdog_init(void); void set_muxconf_regs(void); +u32 get_cpu_family(void); u32 get_cpu_rev(void); +u32 get_sku_id(void); u32 get_mem_type(void); u32 get_sysboot_value(void); u32 is_gpmc_muxed(void); diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h index 79ff22cf31..d0c808d121 100644 --- a/arch/arm/include/asm/arch-omap4/omap4.h +++ b/arch/arm/include/asm/arch-omap4/omap4.h @@ -88,6 +88,7 @@ #define PRM_DEVICE_BASE (PRM_BASE + 0x1B00) #define PRM_RSTCTRL PRM_DEVICE_BASE +#define PRM_RSTCTRL_RESET 0x01 #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index ad0c640dfd..4813e9e21d 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -33,6 +33,9 @@ void watchdog_init(void); u32 get_device_type(void); void invalidate_dcache(u32); void set_muxconf_regs(void); +void sr32(void *, u32, u32, u32); +u32 wait_on_value(u32, u32, void *, u32); +void sdelay(unsigned long); extern const struct omap_sysinfo sysinfo; diff --git a/board/overo/overo.c b/board/overo/overo.c index e85be7d5e6..1b67f1f502 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -43,6 +43,17 @@ static void setup_net_chip(void); #endif +/* GPMC definitions for LAN9221 chips on Tobi expansion boards */ +static const u32 gpmc_lan_config[] = { + NET_LAN9221_GPMC_CONFIG1, + NET_LAN9221_GPMC_CONFIG2, + NET_LAN9221_GPMC_CONFIG3, + NET_LAN9221_GPMC_CONFIG4, + NET_LAN9221_GPMC_CONFIG5, + NET_LAN9221_GPMC_CONFIG6, + /*CONFIG7- computed as params */ +}; + /* * Routine: board_init * Description: Early hardware init. @@ -61,6 +72,70 @@ int board_init(void) } /* + * Routine: get_board_revision + * Description: Returns the board revision + */ +int get_board_revision(void) +{ + int revision; + + if (!omap_request_gpio(112) && + !omap_request_gpio(113) && + !omap_request_gpio(115)) { + + omap_set_gpio_direction(112, 1); + omap_set_gpio_direction(113, 1); + omap_set_gpio_direction(115, 1); + + revision = omap_get_gpio_datain(115) << 2 | + omap_get_gpio_datain(113) << 1 | + omap_get_gpio_datain(112); + + omap_free_gpio(112); + omap_free_gpio(113); + omap_free_gpio(115); + } else { + printf("Error: unable to acquire board revision GPIOs\n"); + revision = -1; + } + + return revision; +} + +/* + * Routine: get_sdio2_config + * Description: Return information about the wifi module connection + * Returns 0 if the module connects though a level translator + * Returns 1 if the module connects directly + */ +int get_sdio2_config(void) +{ + int sdio_direct; + + if (!omap_request_gpio(130) && !omap_request_gpio(139)) { + + omap_set_gpio_direction(130, 0); + omap_set_gpio_direction(139, 1); + + sdio_direct = 1; + omap_set_gpio_dataout(130, 0); + if (omap_get_gpio_datain(139) == 0) { + omap_set_gpio_dataout(130, 1); + if (omap_get_gpio_datain(139) == 1) + sdio_direct = 0; + } + + omap_free_gpio(130); + omap_free_gpio(139); + } else { + printf("Error: unable to acquire sdio2 clk GPIOs\n"); + sdio_direct = -1; + } + + return sdio_direct; +} + +/* * Routine: misc_init_r * Description: Configure board specific parts */ @@ -73,6 +148,21 @@ int misc_init_r(void) setup_net_chip(); #endif + printf("Board revision: %d\n", get_board_revision()); + + switch (get_sdio2_config()) { + case 0: + printf("Tranceiver detected on mmc2\n"); + MUX_OVERO_SDIO2_TRANSCEIVER(); + break; + case 1: + printf("Direct connection on mmc2\n"); + MUX_OVERO_SDIO2_DIRECT(); + break; + default: + printf("Unable to detect mmc2 connection type\n"); + } + dieid_num_r(); return 0; @@ -99,14 +189,13 @@ static void setup_net_chip(void) { struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - /* Configure GPMC registers */ - writel(NET_LAN9221_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1); - writel(NET_LAN9221_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2); - writel(NET_LAN9221_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3); - writel(NET_LAN9221_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4); - writel(NET_LAN9221_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5); - writel(NET_LAN9221_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6); - writel(NET_LAN9221_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7); + /* first lan chip */ + enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, + GPMC_SIZE_16M); + + /* second lan chip */ + enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], 0x2B000000, + GPMC_SIZE_16M); /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); diff --git a/board/overo/overo.h b/board/overo/overo.h index 18735232a1..33a92e4e12 100644 --- a/board/overo/overo.h +++ b/board/overo/overo.h @@ -138,7 +138,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ /* - SMSC911X_NRES*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\ /*DSS*/\ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ @@ -189,18 +189,18 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\ /* - PEN_DOWN*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\ /*Audio Interface */\ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ /*Expansion card */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) /*MMC1_CLK*/\ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ @@ -211,7 +211,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ /*Wireless LAN */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ @@ -220,7 +220,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ /*Bluetooth*/\ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ @@ -301,7 +301,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ - MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\ MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\ @@ -387,5 +387,36 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ +#define MUX_OVERO_SDIO2_DIRECT() \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0)) /*MMC2_DAT4*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0)) /*MMC2_DAT5*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0)) /*MMC2_DAT6*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/ + +#define MUX_OVERO_SDIO2_TRANSCEIVER() \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /*GPIO_126*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/ #endif diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 3b4c9e73b5..4647908052 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -38,8 +38,6 @@ #include <asm/mach-types.h> #include "beagle.h" -static int beagle_revision_c; - /* * Routine: board_init * Description: Early hardware init. @@ -58,43 +56,41 @@ int board_init(void) } /* - * Routine: beagle_get_revision - * Description: Return the revision of the BeagleBoard this code is running on. - * If it is a revision Ax/Bx board, this function returns 0, - * on a revision C board you will get a 1. + * Routine: get_board_revision + * Description: Detect if we are running on a Beagle revision Ax/Bx, + * C1/2/3, C4 or xM. This can be done by reading + * the level of GPIO173, GPIO172 and GPIO171. This should + * result in + * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx + * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 + * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 + * GPIO173, GPIO172, GPIO171: 0 0 0 => xM */ -int beagle_get_revision(void) +int get_board_revision(void) { - return beagle_revision_c; -} + int revision; -/* - * Routine: beagle_identify - * Description: Detect if we are running on a Beagle revision Ax/Bx or - * Cx. This can be done by GPIO_171. If this is low, we are - * running on a revision C board. - */ -void beagle_identify(void) -{ - beagle_revision_c = 0; - if (!omap_request_gpio(171)) { - unsigned int val; + if (!omap_request_gpio(171) && + !omap_request_gpio(172) && + !omap_request_gpio(173)) { omap_set_gpio_direction(171, 1); - val = omap_get_gpio_datain(171); - omap_free_gpio(171); + omap_set_gpio_direction(172, 1); + omap_set_gpio_direction(173, 1); - if (val) - beagle_revision_c = 0; - else - beagle_revision_c = 1; + revision = omap_get_gpio_datain(173) << 2 | + omap_get_gpio_datain(172) << 1 | + omap_get_gpio_datain(171); + + omap_free_gpio(171); + omap_free_gpio(172); + omap_free_gpio(173); + } else { + printf("Error: unable to acquire board revision GPIOs\n"); + revision = -1; } - printf("Board revision "); - if (beagle_revision_c) - printf("C\n"); - else - printf("Ax/Bx\n"); + return revision; } /* @@ -106,6 +102,44 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; + switch (get_board_revision()) { + case REVISION_AXBX: + printf("Beagle Rev Ax/Bx\n"); + setenv("beaglerev", "AxBx"); + setenv("mpurate", "600"); + break; + case REVISION_CX: + printf("Beagle Rev C1/C2/C3\n"); + setenv("beaglerev", "Cx"); + setenv("mpurate", "600"); + MUX_BEAGLE_C(); + break; + case REVISION_C4: + printf("Beagle Rev C4\n"); + setenv("beaglerev", "C4"); + setenv("mpurate", "720"); + MUX_BEAGLE_C(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + break; + case REVISION_XM: + printf("Beagle xM Rev A\n"); + setenv("beaglerev", "xMA"); + setenv("mpurate", "1000"); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + break; + default: + printf("Beagle unknown 0x%02x\n", get_board_revision()); + } + twl4030_power_init(); twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); @@ -120,8 +154,6 @@ int misc_init_r(void) writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); - beagle_identify(); - dieid_num_r(); return 0; @@ -136,8 +168,4 @@ int misc_init_r(void) void set_muxconf_regs(void) { MUX_BEAGLE(); - - if (beagle_revision_c) { - MUX_BEAGLE_C(); - } } diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index 7fe6275e37..d86033772b 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -33,7 +33,11 @@ const omap3_sysinfo sysinfo = { #endif }; -#define BOARD_REVISION_MASK (0x1 << 11) +/* BeagleBoard revisions */ +#define REVISION_AXBX 0x7 +#define REVISION_CX 0x6 +#define REVISION_C4 0x5 +#define REVISION_XM 0x0 /* * IEN - Input Enable @@ -264,7 +268,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ @@ -374,11 +378,37 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ #define MUX_BEAGLE_C() \ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ +#define MUX_BEAGLE_XM() \ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\ + MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\ + MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\ + MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\ + MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\ + MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ + #endif diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h index 8f6a6b1a6b..877ae5f959 100644 --- a/board/ti/panda/panda.h +++ b/board/ti/panda/panda.h @@ -237,28 +237,28 @@ const struct pad_conf_entry core_padconf_array[] = { }; const struct pad_conf_entry wkup_padconf_array[] = { - {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ - {PAD1_SIM_CLK, (M0)}, /* sim_clk */ - {PAD0_SIM_RESET, (M0)}, /* sim_reset */ - {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ - {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ - {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ - {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ - {PAD1_FREF_XTAL_IN, (M0)}, /* # */ - {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ - {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ - {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ - {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */ - {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ - {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */ - {PAD0_FREF_CLK4_OUT, (M0)}, /* # */ - {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ - {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ - {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ - {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ - {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ - {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ - {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ + {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ + {PAD1_SIM_CLK, (M0)}, /* sim_clk */ + {PAD0_SIM_RESET, (M0)}, /* sim_reset */ + {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ + {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ + {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ + {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ + {PAD1_FREF_XTAL_IN, (M0)}, /* # */ + {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ + {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ + {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ + {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ + {PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */ + {PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */ + {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ + {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ + {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ + {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ + {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ + {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ + {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ }; #endif diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ed1c9c9a88..7d178468ad 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2653,9 +2653,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, } if (!type) { - printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x\n", __func__, - *maf_id, dev_id); + /* supress warning if there is no nand */ + if (*maf_id != 0x00 && *maf_id != 0xff && + dev_id != 0x00 && dev_id != 0xff) + printk(KERN_INFO "%s: unknown NAND device: " + "Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", + __func__, *maf_id, dev_id); return ERR_PTR(-ENODEV); } diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index eb066cb58d..1a5408959e 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -59,57 +59,48 @@ void twl4030_power_reset_init(void) } } - /* - * Power Init + * Set Device Group and Voltage */ -#define DEV_GRP_P1 0x20 -#define VAUX3_VSEL_28 0x03 -#define DEV_GRP_ALL 0xE0 -#define VPLL2_VSEL_18 0x05 -#define VDAC_VSEL_18 0x03 +void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, + u8 dev_grp, u8 dev_grp_sel) +{ + /* Select the Device Group */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel, + dev_grp); + + /* Select the Voltage */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val, + vsel_reg); +} void twl4030_power_init(void) { - unsigned char byte; - /* set VAUX3 to 2.8V */ - byte = DEV_GRP_P1; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VAUX3_DEV_GRP); - byte = VAUX3_VSEL_28; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VAUX3_DEDICATED); + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED, + TWL4030_PM_RECEIVER_VAUX3_VSEL_28, + TWL4030_PM_RECEIVER_VAUX3_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); /* set VPLL2 to 1.8V */ - byte = DEV_GRP_ALL; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VPLL2_DEV_GRP); - byte = VPLL2_VSEL_18; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VPLL2_DEDICATED); + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED, + TWL4030_PM_RECEIVER_VPLL2_VSEL_18, + TWL4030_PM_RECEIVER_VPLL2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_ALL); /* set VDAC to 1.8V */ - byte = DEV_GRP_P1; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VDAC_DEV_GRP); - byte = VDAC_VSEL_18; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VDAC_DEDICATED); + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED, + TWL4030_PM_RECEIVER_VDAC_VSEL_18, + TWL4030_PM_RECEIVER_VDAC_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } -#define VMMC1_VSEL_30 0x02 - void twl4030_power_mmc_init(void) { - unsigned char byte; - - byte = DEV_GRP_P1; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VMMC1_DEV_GRP); - - /* 3 Volts */ - byte = VMMC1_VSEL_30; - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte, - TWL4030_PM_RECEIVER_VMMC1_DEDICATED); + /* Set VMMC1 to 3 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, + TWL4030_PM_RECEIVER_VMMC1_VSEL_30, + TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } + diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index ae5a7919d8..71553f9a08 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -158,6 +158,7 @@ /* * Board NAND Info. */ +#define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ @@ -183,6 +184,7 @@ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ @@ -191,6 +193,7 @@ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=jffs2\0" \ "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ @@ -198,6 +201,7 @@ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 3a3b389614..a0e0f248b2 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -129,6 +129,7 @@ /* * Board NAND Info. */ +#define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ @@ -153,6 +154,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ @@ -161,6 +163,7 @@ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=jffs2\0" \ "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ @@ -168,6 +171,7 @@ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ "vram=${vram} " \ "omapfb.mode=dvi:${dvimode} " \ "omapfb.debug=y " \ diff --git a/include/twl4030.h b/include/twl4030.h index 2b2f5ae6cd..930c285c26 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -304,6 +304,17 @@ #define TWL4030_PM_RECEIVER_MAINREF_TYPE 0xF0 #define TWL4030_PM_RECEIVER_MAINREF_REMAP 0xF1 +/* Voltage Selection in PM Receiver Module */ +#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03 +#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 +#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 + +/* Device Selection in PM Receiver Module */ +#define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20 +#define TWL4030_PM_RECEIVER_DEV_GRP_ALL 0xE0 + /* LED */ #define TWL4030_LED_LEDEN 0xEE #define TWL4030_LED_LEDEN_LEDAON (1 << 0) @@ -500,6 +511,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) /* For hardware resetting */ void twl4030_power_reset_init(void); +/* For setting device group and voltage */ +void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, + u8 dev_grp, u8 dev_grp_sel); /* For initializing power device */ void twl4030_power_init(void); /* For initializing mmc power */ |