diff options
| -rw-r--r-- | arch/arm/cpu/armv7/keystone/init.c | 51 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-keystone/hardware-k2l.h | 24 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-keystone/hardware.h | 1 |
3 files changed, 76 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c index 62081b7efa..c2b947839d 100644 --- a/arch/arm/cpu/armv7/keystone/init.c +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -13,6 +13,7 @@ #include <asm/arch/msmc.h> #include <asm/arch/clock.h> #include <asm/arch/hardware.h> +#include <asm/arch/psc_defs.h> void chip_configuration_unlock(void) { @@ -20,6 +21,53 @@ void chip_configuration_unlock(void) __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1); } +#ifdef CONFIG_SOC_K2L +void osr_init(void) +{ + u32 i; + u32 j; + u32 val; + u32 base = KS2_OSR_CFG_BASE; + u32 ecc_ctrl[KS2_OSR_NUM_RAM_BANKS]; + + /* Enable the OSR clock domain */ + psc_enable_module(KS2_LPSC_OSR); + + /* Disable OSR ECC check for all the ram banks */ + for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) { + val = i | KS2_OSR_ECC_VEC_TRIG_RD | + (KS2_OSR_ECC_CTRL << KS2_OSR_ECC_VEC_RD_ADDR_SH); + + writel(val , base + KS2_OSR_ECC_VEC); + + /** + * wait till read is done. + * Print should be added after earlyprintk support is added. + */ + for (j = 0; j < 10000; j++) { + val = readl(base + KS2_OSR_ECC_VEC); + if (val & KS2_OSR_ECC_VEC_RD_DONE) + break; + } + + ecc_ctrl[i] = readl(base + KS2_OSR_ECC_CTRL) ^ + KS2_OSR_ECC_CTRL_CHK; + + writel(ecc_ctrl[i], KS2_MSMC_DATA_BASE + i * 4); + writel(ecc_ctrl[i], base + KS2_OSR_ECC_CTRL); + } + + /* Reset OSR memory to all zeros */ + for (i = 0; i < KS2_OSR_SIZE; i += 4) + writel(0, KS2_OSR_DATA_BASE + i); + + /* Enable OSR ECC check for all the ram banks */ + for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) + writel(ecc_ctrl[i] | + KS2_OSR_ECC_CTRL_CHK, base + KS2_OSR_ECC_CTRL); +} +#endif + int arch_cpu_init(void) { chip_configuration_unlock(); @@ -32,6 +80,9 @@ int arch_cpu_init(void) #if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE1); #endif +#ifdef CONFIG_SOC_K2L + osr_init(); +#endif /* * just initialise the COM2 port so that TI specific diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h index c1fa3afa9d..05532ada70 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2l.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h @@ -60,6 +60,30 @@ #define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3 #define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D +/* OSR */ +#define KS2_OSR_DATA_BASE 0x70000000 /* OSR data base */ +#define KS2_OSR_CFG_BASE 0x02348c00 /* OSR config base */ +#define KS2_OSR_ECC_VEC 0x08 /* ECC Vector reg */ +#define KS2_OSR_ECC_CTRL 0x14 /* ECC control reg */ + +/* OSR ECC Vector register */ +#define KS2_OSR_ECC_VEC_TRIG_RD BIT(15) /* trigger a read op */ +#define KS2_OSR_ECC_VEC_RD_DONE BIT(24) /* read complete */ + +#define KS2_OSR_ECC_VEC_RAM_ID_SH 0 /* RAM ID shift */ +#define KS2_OSR_ECC_VEC_RD_ADDR_SH 16 /* read address shift */ + +/* OSR ECC control register */ +#define KS2_OSR_ECC_CTRL_EN BIT(0) /* ECC enable bit */ +#define KS2_OSR_ECC_CTRL_CHK BIT(1) /* ECC check bit */ +#define KS2_OSR_ECC_CTRL_RMW BIT(2) /* ECC check bit */ + +/* Number of OSR RAM banks */ +#define KS2_OSR_NUM_RAM_BANKS 4 + +/* OSR memory size */ +#define KS2_OSR_SIZE 0x100000 + /* Number of DSP cores */ #define KS2_NUM_DSPS 4 diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index 295c6b0ea9..08a7c70038 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -142,6 +142,7 @@ typedef volatile unsigned int *dv_reg_p; /* MSMC control */ #define KS2_MSMC_CTRL_BASE 0x0bc00000 +#define KS2_MSMC_DATA_BASE 0x0c000000 #define KS2_MSMC_SEGMENT_TETRIS 8 #define KS2_MSMC_SEGMENT_NETCP 9 #define KS2_MSMC_SEGMENT_QM_PDSP 10 |