diff options
| -rw-r--r-- | board/eukrea/cpu9260/config.mk | 1 | ||||
| -rw-r--r-- | board/eukrea/cpu9260/cpu9260.c | 161 | ||||
| -rw-r--r-- | board/eukrea/cpu9260/led.c | 36 | ||||
| -rw-r--r-- | boards.cfg | 8 | ||||
| -rw-r--r-- | include/configs/cpu9260.h | 265 |
5 files changed, 263 insertions, 208 deletions
diff --git a/board/eukrea/cpu9260/config.mk b/board/eukrea/cpu9260/config.mk deleted file mode 100644 index 207769233e..0000000000 --- a/board/eukrea/cpu9260/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 61b6c3323d..9ec48a0d21 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -29,12 +29,13 @@ #include <common.h> #include <asm/sizes.h> #include <asm/arch/at91sam9260.h> -#include <asm/arch/at91sam9_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> -#include <asm/arch/gpio.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/clk.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) @@ -53,116 +54,103 @@ DECLARE_GLOBAL_DATA_PTR; static void cpu9260_nand_hw_init(void) { unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->csa); /* Configure SMC CS3 for NAND/SmartMedia */ #if defined(CONFIG_CPU9G20) - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4) | - AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_DBW_8 | - AT91_SMC_TDF_(3)); + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); #elif defined(CONFIG_CPU9260) - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_DBW_8 | - AT91_SMC_TDF_(2)); + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); #endif - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif #ifdef CONFIG_MACB static void cpu9260_macb_hw_init(void) { - unsigned long rstc; + unsigned long rstcmr; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE; /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); - - /* - * Disable pull-up on: - * RXDV (PA17) => PHY normal mode (not Test mode) - * ERX0 (PA14) => PHY ADDR0 - * ERX1 (PA15) => PHY ADDR1 - * ERX2 (PA25) => PHY ADDR2 - * ERX3 (PA26) => PHY ADDR3 - * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); - - rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL; + writel(1 << AT91SAM9260_ID_EMAC, &pmc->pcer); + + at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); + + rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; /* Need to reset PHY -> 500ms reset */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (AT91_RSTC_ERSTL & (0x0D << 8)) | - AT91_RSTC_URSTEN); + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) | + AT91_RSTC_MR_URSTEN, &rstc->mr); - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); /* Wait for end hardware reset */ - while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)) + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) ; /* Restore NRST value */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (rstc) | - AT91_RSTC_URSTEN); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr); at91_macb_hw_init(); } #endif -int board_init(void) +int board_early_init_f(void) { - /* Enable Ctrlc */ - console_init_f(); + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + writel((1 << AT91SAM9260_ID_PIOA) | + (1 << AT91SAM9260_ID_PIOC) | + (1 << AT91SAM9260_ID_PIOB), + &pmc->pcer); + + at91_serial_hw_init(); + + return 0; +} + +int board_init(void) +{ /* arch number of the board */ #if defined(CONFIG_CPU9G20) gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20; @@ -171,9 +159,8 @@ int board_init(void) #endif /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND cpu9260_nand_hw_init(); #endif @@ -188,26 +175,16 @@ int board_init(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - if (get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != - PHYS_SDRAM_SIZE) - return -1; - - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0); #endif return rc; } diff --git a/board/eukrea/cpu9260/led.c b/board/eukrea/cpu9260/led.c index e73543bb12..d0906bc894 100644 --- a/board/eukrea/cpu9260/led.c +++ b/board/eukrea/cpu9260/led.c @@ -35,65 +35,67 @@ static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF, void coloured_LED_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer); - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_output(CONFIG_BLUE_LED, 1); + at91_set_pio_output(CONFIG_RED_LED, 1); + at91_set_pio_output(CONFIG_GREEN_LED, 1); + at91_set_pio_output(CONFIG_YELLOW_LED, 1); + at91_set_pio_output(CONFIG_BLUE_LED, 1); - at91_set_gpio_value(CONFIG_RED_LED, 1); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(CONFIG_BLUE_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 1); + at91_set_pio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_YELLOW_LED, 1); + at91_set_pio_value(CONFIG_BLUE_LED, 1); } void red_LED_off(void) { - at91_set_gpio_value(CONFIG_RED_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 1); saved_state[STATUS_LED_RED] = STATUS_LED_OFF; } void green_LED_off(void) { - at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_GREEN_LED, 1); saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; } void yellow_LED_off(void) { - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); + at91_set_pio_value(CONFIG_YELLOW_LED, 1); saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; } void blue_LED_off(void) { - at91_set_gpio_value(CONFIG_BLUE_LED, 1); + at91_set_pio_value(CONFIG_BLUE_LED, 1); saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF; } void red_LED_on(void) { - at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_pio_value(CONFIG_RED_LED, 0); saved_state[STATUS_LED_RED] = STATUS_LED_ON; } void green_LED_on(void) { - at91_set_gpio_value(CONFIG_GREEN_LED, 0); + at91_set_pio_value(CONFIG_GREEN_LED, 0); saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; } void yellow_LED_on(void) { - at91_set_gpio_value(CONFIG_YELLOW_LED, 0); + at91_set_pio_value(CONFIG_YELLOW_LED, 0); saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; } void blue_LED_on(void) { - at91_set_gpio_value(CONFIG_BLUE_LED, 0); + at91_set_pio_value(CONFIG_BLUE_LED, 0); saved_state[STATUS_LED_BLUE] = STATUS_LED_ON; } diff --git a/boards.cfg b/boards.cfg index 4aa21f3b55..0f7daf54c3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -73,6 +73,14 @@ omap1510inn arm arm925t - ti aspenite arm arm926ejs - Marvell armada100 afeb9260 arm arm926ejs - - at91 at91cap9adk arm arm926ejs - atmel at91 +cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260 +cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT +cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M +cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT +cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20 +cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT +cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M +cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000 top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000 meesc arm arm926ejs - esd at91 diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index d2394235f1..a8ada2d418 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -31,35 +31,39 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - -#define CONFIG_DISPLAY_CPUINFO 1 +/* to be removed once maemory-map.h is fixed */ +#define AT91_BASE_SYS 0xffffe800 +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 - -#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9260) -#define CONFIG_CPU9260 1 -#elif defined(CONFIG_CPU9G20_128M) || defined(CONFIG_CPU9G20) -#define CONFIG_CPU9G20 1 -#endif +#define CONFIG_ARM926EJS #if defined(CONFIG_CPU9G20) -#define CONFIG_AT91SAM9G20 1 +#define CONFIG_AT91SAM9G20 #elif defined(CONFIG_CPU9260) -#define CONFIG_AT91SAM9260 1 +#define CONFIG_AT91SAM9260 #else #error "Unknown board" #endif +#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x23f00000 +#else +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#endif /* clocks */ #if defined(CONFIG_CPU9G20) @@ -113,8 +117,8 @@ /* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ #define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC |\ - AT91_MATRIX_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_VDDIOMSEL) + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \ + AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V) /* SDRAM */ /* SDRAMC_MR Mode register */ @@ -199,67 +203,68 @@ /* setup SMC0, CS0 (NOR Flash) - 16-bit */ #if defined(CONFIG_CPU9G20) #define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) + (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(8) | \ - AT91_SMC_NRDPULSE_(14) | AT91_SMC_NCS_RDPULSE_(14)) + (AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \ + AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(14)) + (AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(3)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(3)) #elif defined(CONFIG_CPU9260) #define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) + (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(6) | \ - AT91_SMC_NRDPULSE_(10) | AT91_SMC_NCS_RDPULSE_(10)) + (AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \ + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(6) | AT91_SMC_NRDCYCLE_(10)) + (AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(2)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(2)) #endif /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) + AT91_RSTC_CR_PROCRST | \ + AT91_RSTC_MR_ERSTL(1) | \ + AT91_RSTC_MR_ERSTL(2)) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_AT91_GPIO +#define CONFIG_ATMEL_USART #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART3 #define CONFIG_BOOTDELAY 3 /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. @@ -271,37 +276,41 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 -#define CONFIG_CMD_FAT 1 +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MII /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) #define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB #else -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 MB */ +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) #define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB #endif /* NAND flash */ -#define CONFIG_NAND_ATMEL 1 +#define CONFIG_NAND_ATMEL #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* NOR flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SYS_NO_FLASH +#else +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER #define PHYS_FLASH_1 0x10000000 #define PHYS_FLASH_2 0x12000000 #define CONFIG_SYS_FLASH_BANKS_LIST \ @@ -310,23 +319,23 @@ #define CONFIG_SYS_MAX_FLASH_SECT (255+4) #define CONFIG_SYS_MAX_FLASH_BANKS 2 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#endif /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_RESET_PHY_R 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY 1 +#define CONFIG_MACB_SEARCH_PHY /* LEDS */ /* Status LED */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED 1 +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED #define STATUS_LED_RED 0 #define STATUS_LED_GREEN 1 #define STATUS_LED_YELLOW 2 @@ -350,39 +359,56 @@ /* Optional value */ #define STATUS_LED_BOOT STATUS_LED_BIT -#define CONFIG_RED_LED AT91_PIN_PC11 -#define CONFIG_GREEN_LED AT91_PIN_PC12 -#define CONFIG_YELLOW_LED AT91_PIN_PC7 -#define CONFIG_BLUE_LED AT91_PIN_PC9 +#define CONFIG_RED_LED AT91_PIO_PORTC, 11 +#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12 +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7 +#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9 /* USB */ -#define CONFIG_USB_ATMEL 1 -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" +#elif defined(CONFIG_CPU9260) #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_STORAGE #define CONFIG_SYS_LOAD_ADDR 0x21000000 +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x21e00000 +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END \ + (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SYS_USE_NANDFLASH +#undef CONFIG_SYS_USE_FLASH +#else +#define CONFIG_SYS_USE_FLASH #undef CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SYS_USE_FLASH 1 +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_BASEDIR "cpu9G20" +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_BASEDIR "cpu9260" +#endif #if defined(CONFIG_SYS_USE_FLASH) -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_OVERWRITE #define CONFIG_BOOTCOMMAND "run flashboot" -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" #define MTDPARTS_DEFAULT \ "mtdparts=physmap-flash.0:" \ "256k(u-boot)ro," \ @@ -393,18 +419,12 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_BASEDIR "cpu9G20" -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_BASEDIR "cpu9260" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "ramboot=tftpboot 0x22000000 cpu9260/uImage;" \ + "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ "run ramargs;bootm 22000000\0" \ "flashboot=run ramargs;bootm 0x10060000\0" \ "basedir=" CONFIG_SYS_BASEDIR "\0" \ @@ -421,6 +441,52 @@ "0x10220000 0x13ffffff;cp.b 0x24000000 " \ "0x10220000 $(filesize)\0" \ "" +#elif defined(CONFIG_NANDBOOT) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=atmel_nand:" \ + "128k(bootstrap)ro," \ + "256k(u-boot)ro," \ + "128k(u-boot-env)ro," \ + "128k(u-boot-env2)ro," \ + "2M(kernel)," \ + "-(rootfs)" + +#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \ + "ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,5\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ + "run ramargs;bootm 22000000\0" \ + "flashboot=run ramargs; nand read 0x22000000 0xA0000 " \ + "0x200000; bootm 0x22000000\0" \ + "basedir=" CONFIG_SYS_BASEDIR "\0" \ + "u-boot=u-boot-eukrea-cpu9260.bin\0" \ + "kernel=uImage-eukrea-cpu9260.bin\0" \ + "rootfs=image-eukrea-cpu9260.ubi\0" \ + "updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \ + "nand erase 20000 40000; " \ + "nand write ${loadaddr} 20000 40000\0" \ + "updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \ + "nand erase a0000 200000; " \ + "nand write ${loadaddr} a0000 200000\0" \ + "updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \ + "nand erase 2a0000 fd60000; " \ + "nand write ${loadaddr} 2a0000 ${filesize}\0" #endif #define CONFIG_BAUDRATE 115200 @@ -435,10 +501,10 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SILENT_CONSOLE 1 -#define CONFIG_NETCONSOLE 1 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SILENT_CONSOLE +#define CONFIG_NETCONSOLE /* * Size of malloc() pool @@ -446,6 +512,9 @@ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ + GENERATED_GBL_DATA_SIZE) + #define CONFIG_STACKSIZE (32 * 1024) #if defined(CONFIG_USE_IRQ) |