diff options
| -rw-r--r-- | drivers/serial/serial_zynq.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 3650af2157..7a6f822c26 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -15,14 +15,14 @@ #include <linux/compiler.h> #include <serial.h> -#define ZYNQ_UART_SR_TXEMPTY (1 << 3) /* TX FIFO empty */ -#define ZYNQ_UART_SR_TXACTIVE (1 << 11) /* TX active */ -#define ZYNQ_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */ - -#define ZYNQ_UART_CR_TX_EN 0x00000010 /* TX enabled */ -#define ZYNQ_UART_CR_RX_EN 0x00000004 /* RX enabled */ -#define ZYNQ_UART_CR_TXRST 0x00000002 /* TX logic reset */ -#define ZYNQ_UART_CR_RXRST 0x00000001 /* RX logic reset */ +#define ZYNQ_UART_SR_TXEMPTY BIT(3) /* TX FIFO empty */ +#define ZYNQ_UART_SR_TXACTIVE BIT(11) /* TX active */ +#define ZYNQ_UART_SR_RXEMPTY BIT(1) /* RX FIFO empty */ + +#define ZYNQ_UART_CR_TX_EN BIT(4) /* TX enabled */ +#define ZYNQ_UART_CR_RX_EN BIT(2) /* RX enabled */ +#define ZYNQ_UART_CR_TXRST BIT(1) /* TX logic reset */ +#define ZYNQ_UART_CR_RXRST BIT(0) /* RX logic reset */ #define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */ |