diff options
-rw-r--r-- | CHANGELOG | 24 | ||||
-rw-r--r-- | MAINTAINERS | 156 | ||||
-rw-r--r-- | Makefile | 7 | ||||
-rw-r--r-- | board/amcc/yellowstone/flash.c | 3 | ||||
-rw-r--r-- | board/amcc/yellowstone/yellowstone.c | 4 | ||||
-rw-r--r-- | board/mpl/common/usb_uhci.c | 24 | ||||
-rw-r--r-- | common/cmd_flash.c | 8 | ||||
-rw-r--r-- | common/cmd_scsi.c | 19 | ||||
-rw-r--r-- | common/environment.c | 5 | ||||
-rw-r--r-- | common/usb.c | 16 | ||||
-rw-r--r-- | common/usb_storage.c | 15 | ||||
-rw-r--r-- | cpu/mpc8260/ether_fcc.c | 7 | ||||
-rw-r--r-- | cpu/mpc85xx/start.S | 4 | ||||
-rw-r--r-- | drivers/ct69000.c | 12 | ||||
-rw-r--r-- | include/configs/MIP405.h | 11 | ||||
-rw-r--r-- | include/configs/Yukon8220.h | 317 | ||||
-rw-r--r-- | include/configs/xaeniax.h | 6 | ||||
-rwxr-xr-x | mkconfig | 2 | ||||
-rw-r--r-- | net/nfs.c | 10 | ||||
-rw-r--r-- | net/tftp.c | 10 | ||||
-rw-r--r-- | tools/envcrc.c | 37 |
21 files changed, 541 insertions, 156 deletions
@@ -46,6 +46,30 @@ Changes for U-Boot 1.1.3: Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board. +* Adjust configuration of XENIAX board + (chip select and GPIO required for USB operation) + +* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be + routed to the Watchdog handler + Patch by Eugene Surovegin, 18 Jun 2005 + +* (re)enabled scsi commands do_scsi() and do_scsiboot() + Patch by Denis Peter, 06 Dec 2004 + +* Fix endianess problem in TFTP / NFS default filenames + Patch by Hiroshi Ito, 06 Dec 2004 + +* Ignore broadcast status bit in received frames in 8260 FCC ethernet + loopback test code + Patch by Murray Jensen, 18 Jul 2005 + +* Fix typo in mkconfig script (used == instead of =) + Patch by Murray Jensen, 18 Jul 2005 + +* Cleanup build problems on 64 bit build hosts + +* Update MAINTAINERS file + * Patch by Stefan Roese, 01 Aug 2005: - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup" diff --git a/MAINTAINERS b/MAINTAINERS index 7525dcc816..0fff4f6084 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -129,6 +129,34 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com> AmigaOneG3SE MPC7xx +Matthias Fuchs <matthias.fuchs@esd-electronics.com> + + ADCIOP IOP480 (PPC401) + APC405 PPC405GP + AR405 PPC405GP + ASH405 PPC405EP + CANBT PPC405CR + CPCI405 PPC405GP + CPCI4052 PPC405GP + CPCI405AB PPC405GP + CPCI405DT PPC405GP + CPCI440 PPC440GP + CPCIISER4 PPC405GP + DASA_SIM IOP480 (PPC401) + DP405 PPC405EP + DU405 PPC405GP + G2000 PPC405EP + HH405 PPC405EP + HUB405 PPC405EP + OCRTC PPC405GP + ORSG PPC405GP + PCI405 PPC405GP + PLU405 PPC405EP + PMC405 PPC405GP + VOH405 PPC405EP + VOM405 PPC405EP + WUH405 PPC405EP + Frank Gottschling <fgottschling@eltec.de> MHPC MPC8xx @@ -148,10 +176,6 @@ Howard Gray <mvsensor@matrix-vision.de> MVS1 MPC823 -Bill Hargen <Bill_Hargen@Jabil.com> - - BUBINGA405EP PPC405EP - Klaus Heydeck <heydeck@kieback-peter.de> KUP4K MPC855 @@ -172,10 +196,6 @@ Sangmoon Kim <dogoil@etinsys.com> debris MPC8245 -Nye Liu <nyet@zumanetworks.com> - - ZUMA MPC7xx_74xx - Thomas Lange <thomas@corelatus.se> GTH MPC860 @@ -184,6 +204,21 @@ The LEOX team <team@leox.org> ELPT860 MPC860T +Nye Liu <nyet@zumanetworks.com> + + ZUMA MPC7xx_74xx + +Jon Loeliger <jdl@freescale.com> + + MPC8540ADS MPC8540 + MPC8560ADS MPC8560 + MPC8541CDS MPC8541 + MPC8555CDS MPC8555 + +Dan Malek <dan@embeddededge.com> + + STxGP3 MPC85xx + Eran Man <eran@nbase.co.il> EVB64260_750CX MPC750CX @@ -197,11 +232,8 @@ Reinhard Meyer <r.meyer@emk-elektronik.de> TOP860 MPC860T TOP5200 MPC5200 -Scott McNutt <smcnutt@artesyncp.com> - - EBONY PPC440GP - Tolunay Orkun <torkun@nextio.com> + csb272 PPC405GP csb472 PPC405GP @@ -210,11 +242,6 @@ Keith Outwater <Keith_Outwater@mvis.com> GEN860T MPC860T GEN860T_SC MPC860T -Stefan Roese <sr@denx.de> - - sycamore PPC4xx - walnut PPC4xx - Frank Panno <fpanno@delphintech.com> ep8260 MPC8260 @@ -232,41 +259,28 @@ Denis Peter <d.peter@mpl.ch> PIP405 PPC4xx Daniel Poirot <dan.poirot@windriver.com> + sbc8240 MPC8240 sbc405 PPC405GP -Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Stefan Roese <sr@denx.de> - ADCIOP IOP480 (PPC401) - APC405 PPC405GP - AR405 PPC405GP - ASH405 PPC405EP - CANBT PPC405CR - CPCI405 PPC405GP - CPCI4052 PPC405GP - CPCI405AB PPC405GP - CPCI405DT PPC405GP - CPCI440 PPC440GP - CPCIISER4 PPC405GP - DASA_SIM IOP480 (PPC401) - DP405 PPC405EP - DU405 PPC405GP - G2000 PPC405EP - HH405 PPC405EP - HUB405 PPC405EP - OCRTC PPC405GP - ORSG PPC405GP - PCI405 PPC405GP - PLU405 PPC405EP - PMC405 PPC405GP - VOH405 PPC405EP - VOM405 PPC405EP - WUH405 PPC405EP + bamboo PPC440EP + bunbinga PPC405EP + ebony PPC440GP + ocotea PPC440GX + sycamore PPC405GPr + walnut PPC405GP + yellowstone PPC440GR + yosemite PPC440EP + +Yusdi Santoso <yusdi_santoso@adaptec.com> + + HIDDEN_DRAGON MPC8241/MPC8245 Travis Sawyer (travis.sawyer@sandburst.com> XPEDITE1K PPC440GX - OCOTEA PPC440GX Peter De Schrijver <p2@mind.be> @@ -299,21 +313,6 @@ John Zhan <zhanz@sinovee.com> svm_sc8xx MPC8xx -Jon Loeliger <jdl@freescale.com> - - MPC8540ADS MPC8540 - MPC8560ADS MPC8560 - MPC8541CDS MPC8541 - MPC8555CDS MPC8555 - -Dan Malek <dan@embeddededge.com> - - STxGP3 MPC85xx - -Yusdi Santoso <yusdi_santoso@adaptec.com> - - HIDDEN_DRAGON MPC8241/MPC8245 - ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -348,6 +347,10 @@ Unknown / orphaned boards: # Board CPU # ######################################################################### +Rishi Bhattacharya <rishi@ti.com> + + omap5912osk ARM926EJS + George G. Davis <gdavis@mvista.com> assabet SA1100 @@ -366,6 +369,11 @@ Marius Gröger <mag@sysgo.de> impa7 ARM720T (EP7211) ep7312 ARM720T (EP7312) +Kshitij Gupta <kshitij@ti.com> + + omap1510inn ARM925T + omap1610inn ARM926EJS + Kyle Harris <kharris@nexus-tech.net> lubbock xscale @@ -377,29 +385,13 @@ Gary Jennejohn <gj@denx.de> smdk2400 ARM920T trab ARM920T -Prakash Kumar <prakash@embedx.com> - - cerf250 xscale - -Kshitij Gupta <kshitij@ti.com> - - omap1510inn ARM925T - omap1610inn ARM926EJS - -Dave Peverley <dpeverley@mpc-data.co.uk> - omap730p2 ARM926EJS - Nishant Kamat <nskamat@ti.com> omap1610h2 ARM926EJS -Rishi Bhattacharya <rishi@ti.com> - - omap5912osk ARM926EJS - -Richard Woodruff <r-woodruff2@ti.com> +Prakash Kumar <prakash@embedx.com> - omap2420h4 ARM1136EJS + cerf250 xscale David Müller <d.mueller@elsoft.ch> @@ -410,6 +402,10 @@ Rolf Offermanns <rof@sysgo.de> shannon SA1100 +Dave Peverley <dpeverley@mpc-data.co.uk> + + omap730p2 ARM926EJS + Robert Schwebel <r.schwebel@pengutronix.de> csb226 xscale @@ -417,7 +413,7 @@ Robert Schwebel <r.schwebel@pengutronix.de> Andrea Scian <andrea.scian@dave-tech.it> - B2 ARM7TDMI (S3C44B0X) + B2 ARM7TDMI (S3C44B0X) Greg Ungerer <greg.ungerer@opengear.com> @@ -425,6 +421,10 @@ Greg Ungerer <greg.ungerer@opengear.com> cm4116 ks8695p cm4148 ks8695p +Richard Woodruff <r-woodruff2@ti.com> + + omap2420h4 ARM1136EJS + Alex Züpke <azu@sysgo.de> lart SA1100 @@ -884,15 +884,14 @@ yellowstone_config: unconfig ######################################################################### ## MPC8220 Systems ######################################################################### -Alaska8220_config: unconfig + +Alaska8220_config \ +Yukon8220_config: unconfig @./mkconfig $(@:_config=) ppc mpc8220 alaska sorcery_config: unconfig @./mkconfig $(@:_config=) ppc mpc8220 sorcery -Yukon8220_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8220 yukon - ######################################################################### ## MPC824x Systems ######################################################################### diff --git a/board/amcc/yellowstone/flash.c b/board/amcc/yellowstone/flash.c index 99fcfb5c7e..cd6a2e61e6 100644 --- a/board/amcc/yellowstone/flash.c +++ b/board/amcc/yellowstone/flash.c @@ -329,7 +329,6 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); volatile FLASH_WORD_SIZE *addr2; int flag, prot, sect, l_sect; - int i; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -517,7 +516,7 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) */ static int write_word(flash_info_t * info, ulong dest, ulong data) { - volatile vu_long *addr2 = (vu_long *) (info->start[0]); + vu_long *addr2 = (vu_long *) (info->start[0]); volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; ulong start; diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 840a46c865..a6b81e6008 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -315,10 +315,6 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - u16 cmdstat; - - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Set up Direct MMIO registers *--------------------------------------------------------------------------*/ diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c index 4a10b7969b..84c91c44b6 100644 --- a/board/mpl/common/usb_uhci.c +++ b/board/mpl/common/usb_uhci.c @@ -1,6 +1,25 @@ /* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland + * Part of this code has been derived from linux: + * Universal Host Controller Interface driver for USB (take II). + * + * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar) + * Deti Fliegl, deti@fliegl.de (executive slave) (lead voice) + * Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader) + * Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter) + * (c) 2000 Yggdrasil Computing, Inc. (port of new PCI interface support + * from usb-ohci.c by Adam Richter, adam@yggdrasil.com). + * (C) 2000 David Brownell, david-b@pacbell.net (usb-ohci.c) + * + * HW-initalization based on material of + * + * (C) Copyright 1999 Linus Torvalds + * (C) Copyright 1999 Johannes Erdfelt + * (C) Copyright 1999 Randy Dunlap + * (C) Copyright 1999 Gregory P. Smith + * + * + * Adapted for U-Boot: + * (C) Copyright 2001 Denis Peter, MPL AG Switzerland * * See file CREDITS for list of people who contributed to this * project. @@ -20,7 +39,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * - * Note: Part of this code has been derived from linux * */ diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 162d1ff657..39720826dc 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -116,12 +116,13 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl) static int addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) { + char len_used = 0; /* indicates if the "start +length" form used */ char *ep; + *addr_first = simple_strtoul(arg1, &ep, 16); if (ep == arg1 || *ep != '\0') return -1; - char len_used = 0; /* indicates if the "start +length" form used */ if (arg2 && *arg2 == '+'){ len_used = 1; ++arg2; @@ -132,6 +133,9 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) return -1; if (len_used){ + char found = 0; + ulong bank; + /* * *addr_last has the length, compute correct *addr_last * XXX watch out for the integer overflow! Right now it is @@ -146,8 +150,6 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) */ /* find the end addr of the sector where the *addr_last is */ - char found = 0; - ulong bank; for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){ int i; flash_info_t *info = &flash_info[bank]; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 7ee9d8efb1..ec53790f81 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -585,4 +585,23 @@ void scsi_setup_inquiry(ccb * pccb) pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ } + +U_BOOT_CMD( + scsi, 5, 1, do_scsi, + "scsi - SCSI sub-system\n", + "reset - reset SCSI controller\n" + "scsi info - show available SCSI devices\n" + "scsi scan - (re-)scan SCSI bus\n" + "scsi device [dev] - show or set current device\n" + "scsi part [dev] - print partition table of one or all SCSI devices\n" + "scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" + " to memory address `addr'\n" +); + +U_BOOT_CMD( + scsiboot, 3, 1, do_scsiboot, + "scsiboot- boot from SCSI device\n", + "loadAddr dev:part\n" +); + #endif /* #if (CONFIG_COMMANDS & CFG_CMD_SCSI) */ diff --git a/common/environment.c b/common/environment.c index 61a8d245f9..c7f54c6bd8 100644 --- a/common/environment.c +++ b/common/environment.c @@ -21,7 +21,12 @@ * MA 02111-1307 USA */ +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#endif +#define __ASM_STUB_PROCESSOR_H__ /* don't include asm/processor. */ #include <config.h> +#undef __ASSEMBLY__ #include <environment.h> /* diff --git a/common/usb.c b/common/usb.c index 03eccf8b3d..d9515e659c 100644 --- a/common/usb.c +++ b/common/usb.c @@ -1,9 +1,19 @@ /* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland * * Most of this source has been derived from the Linux USB - * project. + * project: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id) + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * + * Adapted for U-Boot: + * (C) Copyright 2001 Denis Peter, MPL AG Switzerland * * See file CREDITS for list of people who contributed to this * project. diff --git a/common/usb_storage.c b/common/usb_storage.c index 6cf62e40dd..69d195af60 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -1,12 +1,19 @@ /* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland + * Most of this source has been derived from the Linux USB + * project: + * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) + * (c) 1999 Michael Gee (michael@linuxspecific.com) + * (c) 2000 Yggdrasil Computing, Inc. + * + * + * Adapted for U-Boot: + * (C) Copyright 2001 Denis Peter, MPL AG Switzerland * * For BBB support (C) Copyright 2003 * Gary Jennejohn, DENX Software Engineering <gj@denx.de> * - * Most of this source has been derived from the Linux USB - * project. BBB support based on /sys/dev/usb/umass.c from + * BBB support based on /sys/dev/usb/umass.c from * FreeBSD. * * See file CREDITS for list of people who contributed to this diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c index 82f7390709..0393afabc2 100644 --- a/cpu/mpc8260/ether_fcc.c +++ b/cpu/mpc8260/ether_fcc.c @@ -628,6 +628,9 @@ swap16 (unsigned short x) return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); } +/* broadcast is not an error - we send them like that */ +#define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC) + void eth_loopback_test (void) { @@ -1002,7 +1005,7 @@ eth_loopback_test (void) ecp->rxeacc._f++; } - if (sc & BD_ENET_RX_STATS) { + if (sc & BD_ENET_RX_ERRS) { ulong n; /* @@ -1033,7 +1036,7 @@ eth_loopback_test (void) ecp->rxeacc.cl++; bdp->cbd_sc &= \ - ~BD_ENET_RX_STATS; + ~BD_ENET_RX_ERRS; } else { ushort datlen = bdp->cbd_datlen; diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index fc869a3389..5f75bc1aff 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -209,8 +209,8 @@ _start_e500: li r1,0x0b00 mtspr IVOR11,r1 /* 11: Interval timer */ li r1,0x0c00 - mtspr IVOR12,r1 /* 11: Watchdog timer */ - li r10,0x0d00 + mtspr IVOR12,r1 /* 12: Watchdog timer */ + li r1,0x0d00 mtspr IVOR13,r1 /* 13: Data TLB error */ li r1,0x0e00 mtspr IVOR14,r1 /* 14: Instruction TLB error */ diff --git a/drivers/ct69000.c b/drivers/ct69000.c index f510f371d1..bc2853ed95 100644 --- a/drivers/ct69000.c +++ b/drivers/ct69000.c @@ -1,6 +1,8 @@ -/* - * (C) Copyright 2002 - * Denis Peter, MPL AG Switzerland +/* ported from ctfb.c (linux kernel): + * Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de> + * + * Ported to U-Boot: + * (C) Copyright 2002 Denis Peter, MPL AG Switzerland * * See file CREDITS for list of people who contributed to this * project. @@ -21,10 +23,6 @@ * MA 02111-1307 USA */ -/* - * ported from ctfb.c (linux kernel) for the U-Boot - * - */ #include <common.h> diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 39419d05e3..41a3d394a1 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -367,17 +367,6 @@ #define CONFIG_ATAPI /* enable ATAPI Support */ /************************************************************ - * SCSI support (experimental) only SYM53C8xx supported - ************************************************************/ -#undef CONFIG_SCSI_SYM53C8XX - -#ifdef CONFIG_SCSI_SYM53C8XX -#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */ -#define CFG_SCSI_MAX_SCSI_ID 7 /* maximum SCSI ID (0..6) */ -#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */ -#define CFG_SCSI_SPIN_UP_TIME 2 -#endif /* CONFIG_SCSI_SYM53C8XX */ -/************************************************************ * DISK Partition support ************************************************************/ #define CONFIG_DOS_PARTITION diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h new file mode 100644 index 0000000000..2d3c0e5a91 --- /dev/null +++ b/include/configs/Yukon8220.h @@ -0,0 +1,317 @@ +/* + * (C) Copyright 2004 + * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC8220 1 +#define CONFIG_YUKON8220 1 /* ... on Yukon board */ + +/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to + determine the CPU speed. */ +#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ +#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ + +/* Define this for PSC console +#define CONFIG_PSC_CONSOLE 1 +*/ + +#define CONFIG_EXTUART_CONSOLE 1 + +#ifdef CONFIG_EXTUART_CONSOLE +# define CONFIG_CONS_INDEX 1 +# define CFG_NS16550_SERIAL +# define CFG_NS16550 +# define CFG_NS16550_REG_SIZE 1 +# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008) +# define CFG_NS16550_CLK 18432000 +#endif + +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_BOOTD | \ + CFG_CMD_CACHE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_SNTP ) + +#define CONFIG_NET_MULTI + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTARGS "root=/dev/ram rw" +#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 +#define CONFIG_IPADDR 192.162.1.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.162.1.1 +#define CONFIG_GATEWAYIP 192.162.1.1 +#define CONFIG_HOSTNAME yukon +#define CONFIG_OVERWRITE_ETHADDR_ONCE + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 +#define CFG_I2C_MODULE 1 + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +/* +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0 +#define CFG_ENV_SIZE 256 +*/ + +/* If CFG_AMD_BOOT is defined, the the system will boot from AMD. + else undefined it will boot from Intel Strata flash */ +#define CFG_AMD_BOOT 1 + +/* + * Flexbus Chipselect configuration + */ +#if defined (CFG_AMD_BOOT) +#define CFG_CS0_BASE 0xfff0 +#define CFG_CS0_MASK 0x00080000 /* 512 KB */ +#define CFG_CS0_CTRL 0x003f0d40 + +#define CFG_CS1_BASE 0xfe00 +#define CFG_CS1_MASK 0x01000000 /* 16 MB */ +#define CFG_CS1_CTRL 0x003f1540 +#else +#define CFG_CS0_BASE 0xff00 +#define CFG_CS0_MASK 0x01000000 /* 16 MB */ +#define CFG_CS0_CTRL 0x003f1540 + +#define CFG_CS1_BASE 0xfe08 +#define CFG_CS1_MASK 0x00080000 /* 512 KB */ +#define CFG_CS1_CTRL 0x003f0d40 +#endif + +#define CFG_CS2_BASE 0xf100 +#define CFG_CS2_MASK 0x00040000 +#define CFG_CS2_CTRL 0x003f1140 + +#define CFG_CS3_BASE 0xf200 +#define CFG_CS3_MASK 0x00040000 +#define CFG_CS3_CTRL 0x003f1100 + + +#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16) + +#if defined (CFG_AMD_BOOT) +#define CFG_AMD_BASE CFG_FLASH0_BASE +#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000 +#define CFG_FLASH_BASE CFG_AMD_BASE +#else +#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000 +#define CFG_AMD_BASE CFG_FLASH1_BASE +#define CFG_FLASH_BASE CFG_INTEL_BASE +#endif + +#define CFG_CPLD_BASE (CFG_CS2_BASE << 16) +#define CFG_FPGA_BASE (CFG_CS3_BASE << 16) + + +#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ +#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ + +#define CFG_FLASH_CHECKSUM +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#if defined (CFG_AMD_BOOT) +#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE) +#define CFG_ENV_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE) +#define CFG_ENV1_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE +#else +#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE) +#define CFG_ENV_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE +#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE) +#define CFG_ENV1_SIZE PHYS_AMD_SECT_SIZE +#define CFG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE +#endif + +#define CONFIG_ENV_OVERWRITE 1 + +#if defined CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_EEPROM +#elif defined CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#undef CFG_ENV_IS_IN_EEPROM +#elif defined CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#endif + +#ifndef CFG_JFFS2_FIRST_SECTOR +#define CFG_JFFS2_FIRST_SECTOR 0 +#endif +#ifndef CFG_JFFS2_FIRST_BANK +#define CFG_JFFS2_FIRST_BANK 0 +#endif +#ifndef CFG_JFFS2_NUM_BANKS +#define CFG_JFFS2_NUM_BANKS 1 +#endif +#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 +#define CFG_SRAM_BASE (CFG_MBAR + 0x20000) +#define CFG_SRAM_SIZE 0x8000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000) +#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* SDRAM configuration */ +#define CFG_SDRAM_TOTAL_BANKS 2 +#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ +#define CFG_SDRAM_SPD_SIZE 0x40 +#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ + +/* SDRAM drive strength register */ +#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ + (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ + (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ + (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ + (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) + +/* + * Ethernet configuration + */ +#define CONFIG_MPC8220_FEC 1 +#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x18 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#endif /* __CONFIG_H */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 386ce0539b..1039762830 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -236,7 +236,7 @@ * GP30 == SDATA_OUT is 0 * GP81 == NSSPCLK is 0 */ -#define CFG_GPCR0_VAL 0x40C31868 +#define CFG_GPCR0_VAL 0x40C31848 #define CFG_GPCR1_VAL 0x00000000 #define CFG_GPCR2_VAL 0x00020000 @@ -455,10 +455,10 @@ * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns - * [03] 0 - 32 Bit bus width + * [03] 1 - 16 Bit bus width * [02:00] 100 - variable latency I/O */ -#define CFG_MSC1_VAL 0x1224A264 +#define CFG_MSC1_VAL 0x1224A26C /* This is the configuration for nCS4/5 -> LAN * configuration for nCS5: @@ -32,7 +32,7 @@ rm -f asm ln -s asm-$2 asm rm -f asm-$2/arch -if [ -z "$6" -o "$6" == "NULL" ] ; then +if [ -z "$6" -o "$6" = "NULL" ] ; then ln -s arch-$3 asm-$2/arch else ln -s arch-$6 asm-$2/arch @@ -703,13 +703,11 @@ NfsStart (void) } if (BootFile[0] == '\0') { - IPaddr_t OurIP = ntohl (NetOurIP); - sprintf (default_filename, "/nfsroot/%02lX%02lX%02lX%02lX.img", - OurIP & 0xFF, - (OurIP >> 8) & 0xFF, - (OurIP >> 16) & 0xFF, - (OurIP >> 24) & 0xFF ); + NetOurIP & 0xFF, + (NetOurIP >> 8) & 0xFF, + (NetOurIP >> 16) & 0xFF, + (NetOurIP >> 24) & 0xFF ); strcpy (nfs_path, default_filename); printf ("*** Warning: no boot file name; using '%s'\n", diff --git a/net/tftp.c b/net/tftp.c index 5a5ae22ac8..64a5576663 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -302,13 +302,11 @@ void TftpStart (void) { if (BootFile[0] == '\0') { - IPaddr_t OurIP = ntohl(NetOurIP); - sprintf(default_filename, "%02lX%02lX%02lX%02lX.img", - OurIP & 0xFF, - (OurIP >> 8) & 0xFF, - (OurIP >> 16) & 0xFF, - (OurIP >> 24) & 0xFF ); + NetOurIP & 0xFF, + (NetOurIP >> 8) & 0xFF, + (NetOurIP >> 16) & 0xFF, + (NetOurIP >> 24) & 0xFF ); tftp_filename = default_filename; printf ("*** Warning: no boot file name; using '%s'\n", diff --git a/tools/envcrc.c b/tools/envcrc.c index 5f13a63933..7b7718324e 100644 --- a/tools/envcrc.c +++ b/tools/envcrc.c @@ -25,7 +25,10 @@ #include <stdlib.h> #include <unistd.h> -#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#endif +#define __ASM_STUB_PROCESSOR_H__ /* don't include asm/processor. */ #include <config.h> #undef __ASSEMBLY__ @@ -73,24 +76,24 @@ extern unsigned char environment; int main (int argc, char **argv) { #ifdef ENV_IS_EMBEDDED - int crc ; - unsigned char *envptr = &environment, - *dataptr = envptr + ENV_HEADER_SIZE; - unsigned int datasize = ENV_SIZE; + int crc; + unsigned char *envptr = &environment, + *dataptr = envptr + ENV_HEADER_SIZE; + unsigned int datasize = ENV_SIZE; - crc = crc32(0, dataptr, datasize) ; + crc = crc32 (0, dataptr, datasize); - /* Check if verbose mode is activated passing a parameter to the program */ - if (argc > 1) { - printf("CRC32 from offset %08X to %08X of environment = %08X\n", - (unsigned int)(dataptr - envptr), - (unsigned int)(dataptr - envptr) + datasize, - crc); - } else { - printf("0x%08X\n", crc); - } + /* Check if verbose mode is activated passing a parameter to the program */ + if (argc > 1) { + printf ("CRC32 from offset %08X to %08X of environment = %08X\n", + (unsigned int) (dataptr - envptr), + (unsigned int) (dataptr - envptr) + datasize, + crc); + } else { + printf ("0x%08X\n", crc); + } #else - printf("0\n"); + printf ("0\n"); #endif - return EXIT_SUCCESS; + return EXIT_SUCCESS; } |