summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-uniphier/Makefile1
-rw-r--r--arch/arm/mach-uniphier/board_init.c4
-rw-r--r--arch/arm/mach-uniphier/clk/clk-early-ld4.c7
-rw-r--r--arch/arm/mach-uniphier/init.h8
-rw-r--r--arch/arm/mach-uniphier/nand-reset.c43
5 files changed, 56 insertions, 7 deletions
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 115af244cd..769778cf50 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -22,6 +22,7 @@ endif
obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
obj-y += pinctrl-glue.o
obj-$(CONFIG_MMC) += mmc-first-dev.o
+obj-$(CONFIG_NAND_DENALI) += nand-reset.o
obj-y += fdt-fixup.o
endif
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index 99727a3004..4f9cd6e722 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -141,6 +141,10 @@ int board_init(void)
support_card_late_init();
+ led_puts("U4");
+
+ uniphier_nand_reset_assert();
+
led_puts("Uboo");
return 0;
diff --git a/arch/arm/mach-uniphier/clk/clk-early-ld4.c b/arch/arm/mach-uniphier/clk/clk-early-ld4.c
index f32f78dd26..0f9ce65097 100644
--- a/arch/arm/mach-uniphier/clk/clk-early-ld4.c
+++ b/arch/arm/mach-uniphier/clk/clk-early-ld4.c
@@ -15,13 +15,6 @@ void uniphier_ld4_early_clk_init(void)
{
u32 tmp;
- /* deassert reset */
- if (spl_boot_device() != BOOT_DEVICE_NAND) {
- tmp = readl(sc_base + SC_RSTCTRL);
- tmp &= ~SC_RSTCTRL_NRST_NAND;
- writel(tmp, sc_base + SC_RSTCTRL);
- };
-
/* provide clocks */
tmp = readl(sc_base + SC_CLKCTRL);
tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI;
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 9dc5b885a5..3c77f48853 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -101,6 +101,14 @@ unsigned int uniphier_boot_device_raw(void);
int uniphier_have_internal_stm(void);
int uniphier_boot_from_backend(void);
int uniphier_pin_init(const char *pinconfig_name);
+
+#ifdef CONFIG_NAND_DENALI
+void uniphier_nand_reset_assert(void);
+#else
+static inline void uniphier_nand_reset_assert(void)
+{
+}
+#endif
#ifdef CONFIG_ARM64
void uniphier_mem_map_init(unsigned long dram_base, unsigned long dram_size);
#else
diff --git a/arch/arm/mach-uniphier/nand-reset.c b/arch/arm/mach-uniphier/nand-reset.c
new file mode 100644
index 0000000000..11cadaabd8
--- /dev/null
+++ b/arch/arm/mach-uniphier/nand-reset.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0 or later
+/*
+ * Copyright (C) 2020 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/errno.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <reset.h>
+
+#include "init.h"
+
+/*
+ * Assert the Denali NAND controller reset if found.
+ *
+ * On LD4, the bootstrap process starts running after power-on reset regardless
+ * of the boot mode, here the pin-mux is not necessarily set up for NAND, then
+ * the controller is stuck. Assert the controller reset here, and should be
+ * deasserted in the driver after the pin-mux is correctly handled. For other
+ * SoCs, the bootstrap runs only when the boot mode selects ONFi, but it is yet
+ * effective when the boot swap is on. So, the reset should be asserted anyway.
+ */
+void uniphier_nand_reset_assert(void)
+{
+ struct udevice *dev;
+ struct reset_ctl_bulk resets;
+ int ret;
+
+ ret = uclass_find_first_device(UCLASS_MTD, &dev);
+ if (ret || !dev)
+ return;
+
+ /* make sure this is the Denali NAND controller */
+ if (strcmp(dev->driver->name, "denali-nand-dt"))
+ return;
+
+ ret = reset_get_bulk(dev, &resets);
+ if (ret)
+ return;
+
+ reset_assert_bulk(&resets);
+}