diff options
-rw-r--r-- | include/bzlib.h | 3 | ||||
-rw-r--r-- | lib/bzip2/Makefile | 1 | ||||
-rw-r--r-- | lib/bzip2/bzlib_blocksort.c | 1134 | ||||
-rw-r--r-- | lib/bzip2/bzlib_compress.c | 714 |
4 files changed, 1852 insertions, 0 deletions
diff --git a/include/bzlib.h b/include/bzlib.h index 2d864d56b7..19314f8f66 100644 --- a/include/bzlib.h +++ b/include/bzlib.h @@ -68,7 +68,10 @@ /* Configure for U-Boot environment */ #define BZ_NO_STDIO + +#ifndef CONFIG_SANDBOX #define BZ_NO_COMPRESS +#endif /* End of configuration for U-Boot environment */ #ifdef __cplusplus diff --git a/lib/bzip2/Makefile b/lib/bzip2/Makefile index f0b81ad2c2..585d776ba8 100644 --- a/lib/bzip2/Makefile +++ b/lib/bzip2/Makefile @@ -4,3 +4,4 @@ obj-y += bzlib.o bzlib_crctable.o bzlib_decompress.o \ bzlib_randtable.o bzlib_huffman.o +obj-$(CONFIG_SANDBOX) += bzlib_compress.o bzlib_blocksort.o diff --git a/lib/bzip2/bzlib_blocksort.c b/lib/bzip2/bzlib_blocksort.c new file mode 100644 index 0000000000..2785521502 --- /dev/null +++ b/lib/bzip2/bzlib_blocksort.c @@ -0,0 +1,1134 @@ + +/*-------------------------------------------------------------*/ +/*--- Block sorting machinery ---*/ +/*--- blocksort.c ---*/ +/*-------------------------------------------------------------*/ + +/*-- + This file is a part of bzip2 and/or libbzip2, a program and + library for lossless, block-sorting data compression. + + Copyright (C) 1996-2002 Julian R Seward. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + 2. The origin of this software must not be misrepresented; you must + not claim that you wrote the original software. If you use this + software in a product, an acknowledgment in the product + documentation would be appreciated but is not required. + + 3. Altered source versions must be plainly marked as such, and must + not be misrepresented as being the original software. + + 4. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + Julian Seward, Cambridge, UK. + jseward@acm.org + bzip2/libbzip2 version 1.0.6 of 6 September 2010 + Copyright (C) 1996-2010 Julian Seward <jseward@bzip.org> + + This program is based on (at least) the work of: + Mike Burrows + David Wheeler + Peter Fenwick + Alistair Moffat + Radford Neal + Ian H. Witten + Robert Sedgewick + Jon L. Bentley + + For more information on these sources, see the manual. +--*/ + +#include "bzlib_private.h" + +/*---------------------------------------------*/ +/*--- Fallback O(N log(N)^2) sorting ---*/ +/*--- algorithm, for repetitive blocks ---*/ +/*---------------------------------------------*/ + +/*---------------------------------------------*/ +static +__inline__ +void fallbackSimpleSort ( UInt32* fmap, + UInt32* eclass, + Int32 lo, + Int32 hi ) +{ + Int32 i, j, tmp; + UInt32 ec_tmp; + + if (lo == hi) return; + + if (hi - lo > 3) { + for ( i = hi-4; i >= lo; i-- ) { + tmp = fmap[i]; + ec_tmp = eclass[tmp]; + for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 ) + fmap[j-4] = fmap[j]; + fmap[j-4] = tmp; + } + } + + for ( i = hi-1; i >= lo; i-- ) { + tmp = fmap[i]; + ec_tmp = eclass[tmp]; + for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ ) + fmap[j-1] = fmap[j]; + fmap[j-1] = tmp; + } +} + + +/*---------------------------------------------*/ +#define fswap(zz1, zz2) \ + { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; } + +#define fvswap(zzp1, zzp2, zzn) \ +{ \ + Int32 yyp1 = (zzp1); \ + Int32 yyp2 = (zzp2); \ + Int32 yyn = (zzn); \ + while (yyn > 0) { \ + fswap(fmap[yyp1], fmap[yyp2]); \ + yyp1++; yyp2++; yyn--; \ + } \ +} + + +#define fmin(a,b) ((a) < (b)) ? (a) : (b) + +#define fpush(lz,hz) { stackLo[sp] = lz; \ + stackHi[sp] = hz; \ + sp++; } + +#define fpop(lz,hz) { sp--; \ + lz = stackLo[sp]; \ + hz = stackHi[sp]; } + +#define FALLBACK_QSORT_SMALL_THRESH 10 +#define FALLBACK_QSORT_STACK_SIZE 100 + + +static +void fallbackQSort3 ( UInt32* fmap, + UInt32* eclass, + Int32 loSt, + Int32 hiSt ) +{ + Int32 unLo, unHi, ltLo, gtHi, n, m; + Int32 sp, lo, hi; + UInt32 med, r, r3; + Int32 stackLo[FALLBACK_QSORT_STACK_SIZE]; + Int32 stackHi[FALLBACK_QSORT_STACK_SIZE]; + + r = 0; + + sp = 0; + fpush ( loSt, hiSt ); + + while (sp > 0) { + + AssertH ( sp < FALLBACK_QSORT_STACK_SIZE - 1, 1004 ); + + fpop ( lo, hi ); + if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) { + fallbackSimpleSort ( fmap, eclass, lo, hi ); + continue; + } + + /* Random partitioning. Median of 3 sometimes fails to + avoid bad cases. Median of 9 seems to help but + looks rather expensive. This too seems to work but + is cheaper. Guidance for the magic constants + 7621 and 32768 is taken from Sedgewick's algorithms + book, chapter 35. + */ + r = ((r * 7621) + 1) % 32768; + r3 = r % 3; + if (r3 == 0) med = eclass[fmap[lo]]; else + if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else + med = eclass[fmap[hi]]; + + unLo = ltLo = lo; + unHi = gtHi = hi; + + while (1) { + while (1) { + if (unLo > unHi) break; + n = (Int32)eclass[fmap[unLo]] - (Int32)med; + if (n == 0) { + fswap(fmap[unLo], fmap[ltLo]); + ltLo++; unLo++; + continue; + }; + if (n > 0) break; + unLo++; + } + while (1) { + if (unLo > unHi) break; + n = (Int32)eclass[fmap[unHi]] - (Int32)med; + if (n == 0) { + fswap(fmap[unHi], fmap[gtHi]); + gtHi--; unHi--; + continue; + }; + if (n < 0) break; + unHi--; + } + if (unLo > unHi) break; + fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--; + } + + AssertD ( unHi == unLo-1, "fallbackQSort3(2)" ); + + if (gtHi < ltLo) continue; + + n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n); + m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m); + + n = lo + unLo - ltLo - 1; + m = hi - (gtHi - unHi) + 1; + + if (n - lo > hi - m) { + fpush ( lo, n ); + fpush ( m, hi ); + } else { + fpush ( m, hi ); + fpush ( lo, n ); + } + } +} + +#undef fmin +#undef fpush +#undef fpop +#undef fswap +#undef fvswap +#undef FALLBACK_QSORT_SMALL_THRESH +#undef FALLBACK_QSORT_STACK_SIZE + + +/*---------------------------------------------*/ +/* Pre: + nblock > 0 + eclass exists for [0 .. nblock-1] + ((UChar*)eclass) [0 .. nblock-1] holds block + ptr exists for [0 .. nblock-1] + + Post: + ((UChar*)eclass) [0 .. nblock-1] holds block + All other areas of eclass destroyed + fmap [0 .. nblock-1] holds sorted order + bhtab [ 0 .. 2+(nblock/32) ] destroyed +*/ + +#define SET_BH(zz) bhtab[(zz) >> 5] |= (1 << ((zz) & 31)) +#define CLEAR_BH(zz) bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31)) +#define ISSET_BH(zz) (bhtab[(zz) >> 5] & (1 << ((zz) & 31))) +#define WORD_BH(zz) bhtab[(zz) >> 5] +#define UNALIGNED_BH(zz) ((zz) & 0x01f) + +static +void fallbackSort ( UInt32* fmap, + UInt32* eclass, + UInt32* bhtab, + Int32 nblock, + Int32 verb ) +{ + Int32 ftab[257]; + Int32 ftabCopy[256]; + Int32 H, i, j, k, l, r, cc, cc1; + Int32 nNotDone; + Int32 nBhtab; + UChar* eclass8 = (UChar*)eclass; + + /*-- + Initial 1-char radix sort to generate + initial fmap and initial BH bits. + --*/ + if (verb >= 4) + VPrintf0 ( " bucket sorting ...\n" ); + for (i = 0; i < 257; i++) ftab[i] = 0; + for (i = 0; i < nblock; i++) ftab[eclass8[i]]++; + for (i = 0; i < 256; i++) ftabCopy[i] = ftab[i]; + for (i = 1; i < 257; i++) ftab[i] += ftab[i-1]; + + for (i = 0; i < nblock; i++) { + j = eclass8[i]; + k = ftab[j] - 1; + ftab[j] = k; + fmap[k] = i; + } + + nBhtab = 2 + (nblock / 32); + for (i = 0; i < nBhtab; i++) bhtab[i] = 0; + for (i = 0; i < 256; i++) SET_BH(ftab[i]); + + /*-- + Inductively refine the buckets. Kind-of an + "exponential radix sort" (!), inspired by the + Manber-Myers suffix array construction algorithm. + --*/ + + /*-- set sentinel bits for block-end detection --*/ + for (i = 0; i < 32; i++) { + SET_BH(nblock + 2*i); + CLEAR_BH(nblock + 2*i + 1); + } + + /*-- the log(N) loop --*/ + H = 1; + while (1) { + + if (verb >= 4) + VPrintf1 ( " depth %6d has ", H ); + + j = 0; + for (i = 0; i < nblock; i++) { + if (ISSET_BH(i)) j = i; + k = fmap[i] - H; if (k < 0) k += nblock; + eclass[k] = j; + } + + nNotDone = 0; + r = -1; + while (1) { + + /*-- find the next non-singleton bucket --*/ + k = r + 1; + while (ISSET_BH(k) && UNALIGNED_BH(k)) k++; + if (ISSET_BH(k)) { + while (WORD_BH(k) == 0xffffffff) k += 32; + while (ISSET_BH(k)) k++; + } + l = k - 1; + if (l >= nblock) break; + while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++; + if (!ISSET_BH(k)) { + while (WORD_BH(k) == 0x00000000) k += 32; + while (!ISSET_BH(k)) k++; + } + r = k - 1; + if (r >= nblock) break; + + /*-- now [l, r] bracket current bucket --*/ + if (r > l) { + nNotDone += (r - l + 1); + fallbackQSort3 ( fmap, eclass, l, r ); + + /*-- scan bucket and generate header bits-- */ + cc = -1; + for (i = l; i <= r; i++) { + cc1 = eclass[fmap[i]]; + if (cc != cc1) { SET_BH(i); cc = cc1; }; + } + } + } + + if (verb >= 4) + VPrintf1 ( "%6d unresolved strings\n", nNotDone ); + + H *= 2; + if (H > nblock || nNotDone == 0) break; + } + + /*-- + Reconstruct the original block in + eclass8 [0 .. nblock-1], since the + previous phase destroyed it. + --*/ + if (verb >= 4) + VPrintf0 ( " reconstructing block ...\n" ); + j = 0; + for (i = 0; i < nblock; i++) { + while (ftabCopy[j] == 0) j++; + ftabCopy[j]--; + eclass8[fmap[i]] = (UChar)j; + } + AssertH ( j < 256, 1005 ); +} + +#undef SET_BH +#undef CLEAR_BH +#undef ISSET_BH +#undef WORD_BH +#undef UNALIGNED_BH + + +/*---------------------------------------------*/ +/*--- The main, O(N^2 log(N)) sorting ---*/ +/*--- algorithm. Faster for "normal" ---*/ +/*--- non-repetitive blocks. ---*/ +/*---------------------------------------------*/ + +/*---------------------------------------------*/ +static +__inline__ +Bool mainGtU ( UInt32 i1, + UInt32 i2, + UChar* block, + UInt16* quadrant, + UInt32 nblock, + Int32* budget ) +{ + Int32 k; + UChar c1, c2; + UInt16 s1, s2; + + AssertD ( i1 != i2, "mainGtU" ); + /* 1 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 2 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 3 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 4 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 5 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 6 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 7 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 8 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 9 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 10 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 11 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + /* 12 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + i1++; i2++; + + k = nblock + 8; + + do { + /* 1 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 2 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 3 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 4 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 5 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 6 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 7 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + /* 8 */ + c1 = block[i1]; c2 = block[i2]; + if (c1 != c2) return (c1 > c2); + s1 = quadrant[i1]; s2 = quadrant[i2]; + if (s1 != s2) return (s1 > s2); + i1++; i2++; + + if (i1 >= nblock) i1 -= nblock; + if (i2 >= nblock) i2 -= nblock; + + k -= 8; + (*budget)--; + } + while (k >= 0); + + return False; +} + + +/*---------------------------------------------*/ +/*-- + Knuth's increments seem to work better + than Incerpi-Sedgewick here. Possibly + because the number of elems to sort is + usually small, typically <= 20. +--*/ +static +Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280, + 9841, 29524, 88573, 265720, + 797161, 2391484 }; + +static +void mainSimpleSort ( UInt32* ptr, + UChar* block, + UInt16* quadrant, + Int32 nblock, + Int32 lo, + Int32 hi, + Int32 d, + Int32* budget ) +{ + Int32 i, j, h, bigN, hp; + UInt32 v; + + bigN = hi - lo + 1; + if (bigN < 2) return; + + hp = 0; + while (incs[hp] < bigN) hp++; + hp--; + + for (; hp >= 0; hp--) { + h = incs[hp]; + + i = lo + h; + while (True) { + + /*-- copy 1 --*/ + if (i > hi) break; + v = ptr[i]; + j = i; + while ( mainGtU ( + ptr[j-h]+d, v+d, block, quadrant, nblock, budget + ) ) { + ptr[j] = ptr[j-h]; + j = j - h; + if (j <= (lo + h - 1)) break; + } + ptr[j] = v; + i++; + + /*-- copy 2 --*/ + if (i > hi) break; + v = ptr[i]; + j = i; + while ( mainGtU ( + ptr[j-h]+d, v+d, block, quadrant, nblock, budget + ) ) { + ptr[j] = ptr[j-h]; + j = j - h; + if (j <= (lo + h - 1)) break; + } + ptr[j] = v; + i++; + + /*-- copy 3 --*/ + if (i > hi) break; + v = ptr[i]; + j = i; + while ( mainGtU ( + ptr[j-h]+d, v+d, block, quadrant, nblock, budget + ) ) { + ptr[j] = ptr[j-h]; + j = j - h; + if (j <= (lo + h - 1)) break; + } + ptr[j] = v; + i++; + + if (*budget < 0) return; + } + } +} + + +/*---------------------------------------------*/ +/*-- + The following is an implementation of + an elegant 3-way quicksort for strings, + described in a paper "Fast Algorithms for + Sorting and Searching Strings", by Robert + Sedgewick and Jon L. Bentley. +--*/ + +#define mswap(zz1, zz2) \ + { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; } + +#define mvswap(zzp1, zzp2, zzn) \ +{ \ + Int32 yyp1 = (zzp1); \ + Int32 yyp2 = (zzp2); \ + Int32 yyn = (zzn); \ + while (yyn > 0) { \ + mswap(ptr[yyp1], ptr[yyp2]); \ + yyp1++; yyp2++; yyn--; \ + } \ +} + +static +__inline__ +UChar mmed3 ( UChar a, UChar b, UChar c ) +{ + UChar t; + if (a > b) { t = a; a = b; b = t; }; + if (b > c) { + b = c; + if (a > b) b = a; + } + return b; +} + +#define mmin(a,b) ((a) < (b)) ? (a) : (b) + +#define mpush(lz,hz,dz) { stackLo[sp] = lz; \ + stackHi[sp] = hz; \ + stackD [sp] = dz; \ + sp++; } + +#define mpop(lz,hz,dz) { sp--; \ + lz = stackLo[sp]; \ + hz = stackHi[sp]; \ + dz = stackD [sp]; } + + +#define mnextsize(az) (nextHi[az]-nextLo[az]) + +#define mnextswap(az,bz) \ + { Int32 tz; \ + tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \ + tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \ + tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; } + + +#define MAIN_QSORT_SMALL_THRESH 20 +#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT) +#define MAIN_QSORT_STACK_SIZE 100 + +static +void mainQSort3 ( UInt32* ptr, + UChar* block, + UInt16* quadrant, + Int32 nblock, + Int32 loSt, + Int32 hiSt, + Int32 dSt, + Int32* budget ) +{ + Int32 unLo, unHi, ltLo, gtHi, n, m, med; + Int32 sp, lo, hi, d; + + Int32 stackLo[MAIN_QSORT_STACK_SIZE]; + Int32 stackHi[MAIN_QSORT_STACK_SIZE]; + Int32 stackD [MAIN_QSORT_STACK_SIZE]; + + Int32 nextLo[3]; + Int32 nextHi[3]; + Int32 nextD [3]; + + sp = 0; + mpush ( loSt, hiSt, dSt ); + + while (sp > 0) { + + AssertH ( sp < MAIN_QSORT_STACK_SIZE - 2, 1001 ); + + mpop ( lo, hi, d ); + if (hi - lo < MAIN_QSORT_SMALL_THRESH || + d > MAIN_QSORT_DEPTH_THRESH) { + mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget ); + if (*budget < 0) return; + continue; + } + + med = (Int32) + mmed3 ( block[ptr[ lo ]+d], + block[ptr[ hi ]+d], + block[ptr[ (lo+hi)>>1 ]+d] ); + + unLo = ltLo = lo; + unHi = gtHi = hi; + + while (True) { + while (True) { + if (unLo > unHi) break; + n = ((Int32)block[ptr[unLo]+d]) - med; + if (n == 0) { + mswap(ptr[unLo], ptr[ltLo]); + ltLo++; unLo++; continue; + }; + if (n > 0) break; + unLo++; + } + while (True) { + if (unLo > unHi) break; + n = ((Int32)block[ptr[unHi]+d]) - med; + if (n == 0) { + mswap(ptr[unHi], ptr[gtHi]); + gtHi--; unHi--; continue; + }; + if (n < 0) break; + unHi--; + } + if (unLo > unHi) break; + mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--; + } + + AssertD ( unHi == unLo-1, "mainQSort3(2)" ); + + if (gtHi < ltLo) { + mpush(lo, hi, d+1 ); + continue; + } + + n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n); + m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m); + + n = lo + unLo - ltLo - 1; + m = hi - (gtHi - unHi) + 1; + + nextLo[0] = lo; nextHi[0] = n; nextD[0] = d; + nextLo[1] = m; nextHi[1] = hi; nextD[1] = d; + nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1; + + if (mnextsize(0) < mnextsize(1)) mnextswap(0,1); + if (mnextsize(1) < mnextsize(2)) mnextswap(1,2); + if (mnextsize(0) < mnextsize(1)) mnextswap(0,1); + + AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" ); + AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" ); + + mpush (nextLo[0], nextHi[0], nextD[0]); + mpush (nextLo[1], nextHi[1], nextD[1]); + mpush (nextLo[2], nextHi[2], nextD[2]); + } +} + +#undef mswap +#undef mvswap +#undef mpush +#undef mpop +#undef mmin +#undef mnextsize +#undef mnextswap +#undef MAIN_QSORT_SMALL_THRESH +#undef MAIN_QSORT_DEPTH_THRESH +#undef MAIN_QSORT_STACK_SIZE + + +/*---------------------------------------------*/ +/* Pre: + nblock > N_OVERSHOOT + block32 exists for [0 .. nblock-1 +N_OVERSHOOT] + ((UChar*)block32) [0 .. nblock-1] holds block + ptr exists for [0 .. nblock-1] + + Post: + ((UChar*)block32) [0 .. nblock-1] holds block + All other areas of block32 destroyed + ftab [0 .. 65536 ] destroyed + ptr [0 .. nblock-1] holds sorted order + if (*budget < 0), sorting was abandoned +*/ + +#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8]) +#define SETMASK (1 << 21) +#define CLEARMASK (~(SETMASK)) + +static +void mainSort ( UInt32* ptr, + UChar* block, + UInt16* quadrant, + UInt32* ftab, + Int32 nblock, + Int32 verb, + Int32* budget ) +{ + Int32 i, j, k, ss, sb; + Int32 runningOrder[256]; + Bool bigDone[256]; + Int32 copyStart[256]; + Int32 copyEnd [256]; + UChar c1; + Int32 numQSorted; + UInt16 s; + if (verb >= 4) VPrintf0 ( " main sort initialise ...\n" ); + + /*-- set up the 2-byte frequency table --*/ + for (i = 65536; i >= 0; i--) ftab[i] = 0; + + j = block[0] << 8; + i = nblock-1; + for (; i >= 3; i -= 4) { + quadrant[i] = 0; + j = (j >> 8) | ( ((UInt16)block[i]) << 8); + ftab[j]++; + quadrant[i-1] = 0; + j = (j >> 8) | ( ((UInt16)block[i-1]) << 8); + ftab[j]++; + quadrant[i-2] = 0; + j = (j >> 8) | ( ((UInt16)block[i-2]) << 8); + ftab[j]++; + quadrant[i-3] = 0; + j = (j >> 8) | ( ((UInt16)block[i-3]) << 8); + ftab[j]++; + } + for (; i >= 0; i--) { + quadrant[i] = 0; + j = (j >> 8) | ( ((UInt16)block[i]) << 8); + ftab[j]++; + } + + /*-- (emphasises close relationship of block & quadrant) --*/ + for (i = 0; i < BZ_N_OVERSHOOT; i++) { + block [nblock+i] = block[i]; + quadrant[nblock+i] = 0; + } + + if (verb >= 4) VPrintf0 ( " bucket sorting ...\n" ); + + /*-- Complete the initial radix sort --*/ + for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1]; + + s = block[0] << 8; + i = nblock-1; + for (; i >= 3; i -= 4) { + s = (s >> 8) | (block[i] << 8); + j = ftab[s] -1; + ftab[s] = j; + ptr[j] = i; + s = (s >> 8) | (block[i-1] << 8); + j = ftab[s] -1; + ftab[s] = j; + ptr[j] = i-1; + s = (s >> 8) | (block[i-2] << 8); + j = ftab[s] -1; + ftab[s] = j; + ptr[j] = i-2; + s = (s >> 8) | (block[i-3] << 8); + j = ftab[s] -1; + ftab[s] = j; + ptr[j] = i-3; + } + for (; i >= 0; i--) { + s = (s >> 8) | (block[i] << 8); + j = ftab[s] -1; + ftab[s] = j; + ptr[j] = i; + } + + /*-- + Now ftab contains the first loc of every small bucket. + Calculate the running order, from smallest to largest + big bucket. + --*/ + for (i = 0; i <= 255; i++) { + bigDone [i] = False; + runningOrder[i] = i; + } + + { + Int32 vv; + Int32 h = 1; + do h = 3 * h + 1; while (h <= 256); + do { + h = h / 3; + for (i = h; i <= 255; i++) { + vv = runningOrder[i]; + j = i; + while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) { + runningOrder[j] = runningOrder[j-h]; + j = j - h; + if (j <= (h - 1)) goto zero; + } + zero: + runningOrder[j] = vv; + } + } while (h != 1); + } + + /*-- + The main sorting loop. + --*/ + + numQSorted = 0; + + for (i = 0; i <= 255; i++) { + + /*-- + Process big buckets, starting with the least full. + Basically this is a 3-step process in which we call + mainQSort3 to sort the small buckets [ss, j], but + also make a big effort to avoid the calls if we can. + --*/ + ss = runningOrder[i]; + + /*-- + Step 1: + Complete the big bucket [ss] by quicksorting + any unsorted small buckets [ss, j], for j != ss. + Hopefully previous pointer-scanning phases have already + completed many of the small buckets [ss, j], so + we don't have to sort them at all. + --*/ + for (j = 0; j <= 255; j++) { + if (j != ss) { + sb = (ss << 8) + j; + if ( ! (ftab[sb] & SETMASK) ) { + Int32 lo = ftab[sb] & CLEARMASK; + Int32 hi = (ftab[sb+1] & CLEARMASK) - 1; + if (hi > lo) { + if (verb >= 4) + VPrintf4 ( " qsort [0x%x, 0x%x] " + "done %d this %d\n", + ss, j, numQSorted, hi - lo + 1 ); + mainQSort3 ( + ptr, block, quadrant, nblock, + lo, hi, BZ_N_RADIX, budget + ); + numQSorted += (hi - lo + 1); + if (*budget < 0) return; + } + } + ftab[sb] |= SETMASK; + } + } + + AssertH ( !bigDone[ss], 1006 ); + + /*-- + Step 2: + Now scan this big bucket [ss] so as to synthesise the + sorted order for small buckets [t, ss] for all t, + including, magically, the bucket [ss,ss] too. + This will avoid doing Real Work in subsequent Step 1's. + --*/ + { + for (j = 0; j <= 255; j++) { + copyStart[j] = ftab[(j << 8) + ss] & CLEARMASK; + copyEnd [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1; + } + for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) { + k = ptr[j]-1; if (k < 0) k += nblock; + c1 = block[k]; + if (!bigDone[c1]) + ptr[ copyStart[c1]++ ] = k; + } + for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) { + k = ptr[j]-1; if (k < 0) k += nblock; + c1 = block[k]; + if (!bigDone[c1]) + ptr[ copyEnd[c1]-- ] = k; + } + } + + AssertH ( (copyStart[ss]-1 == copyEnd[ss]) + || + /* Extremely rare case missing in bzip2-1.0.0 and 1.0.1. + Necessity for this case is demonstrated by compressing + a sequence of approximately 48.5 million of character + 251; 1.0.0/1.0.1 will then die here. */ + (copyStart[ss] == 0 && copyEnd[ss] == nblock-1), + 1007 ) + + for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK; + + /*-- + Step 3: + The [ss] big bucket is now done. Record this fact, + and update the quadrant descriptors. Remember to + update quadrants in the overshoot area too, if + necessary. The "if (i < 255)" test merely skips + this updating for the last bucket processed, since + updating for the last bucket is pointless. + + The quadrant array provides a way to incrementally + cache sort orderings, as they appear, so as to + make subsequent comparisons in fullGtU() complete + faster. For repetitive blocks this makes a big + difference (but not big enough to be able to avoid + the fallback sorting mechanism, exponential radix sort). + + The precise meaning is: at all times: + + for 0 <= i < nblock and 0 <= j <= nblock + + if block[i] != block[j], + + then the relative values of quadrant[i] and + quadrant[j] are meaningless. + + else { + if quadrant[i] < quadrant[j] + then the string starting at i lexicographically + precedes the string starting at j + + else if quadrant[i] > quadrant[j] + then the string starting at j lexicographically + precedes the string starting at i + + else + the relative ordering of the strings starting + at i and j has not yet been determined. + } + --*/ + bigDone[ss] = True; + + if (i < 255) { + Int32 bbStart = ftab[ss << 8] & CLEARMASK; + Int32 bbSize = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart; + Int32 shifts = 0; + + while ((bbSize >> shifts) > 65534) shifts++; + + for (j = bbSize-1; j >= 0; j--) { + Int32 a2update = ptr[bbStart + j]; + UInt16 qVal = (UInt16)(j >> shifts); + quadrant[a2update] = qVal; + if (a2update < BZ_N_OVERSHOOT) + quadrant[a2update + nblock] = qVal; + } + AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 ); + } + + } + + if (verb >= 4) + VPrintf3 ( " %d pointers, %d sorted, %d scanned\n", + nblock, numQSorted, nblock - numQSorted ); +} + +#undef BIGFREQ +#undef SETMASK +#undef CLEARMASK + + +/*---------------------------------------------*/ +/* Pre: + nblock > 0 + arr2 exists for [0 .. nblock-1 +N_OVERSHOOT] + ((UChar*)arr2) [0 .. nblock-1] holds block + arr1 exists for [0 .. nblock-1] + + Post: + ((UChar*)arr2) [0 .. nblock-1] holds block + All other areas of block destroyed + ftab [ 0 .. 65536 ] destroyed + arr1 [0 .. nblock-1] holds sorted order +*/ +void BZ2_blockSort ( EState* s ) +{ + UInt32* ptr = s->ptr; + UChar* block = s->block; + UInt32* ftab = s->ftab; + Int32 nblock = s->nblock; + Int32 verb = s->verbosity; + Int32 wfact = s->workFactor; + UInt16* quadrant; + Int32 budget; + Int32 budgetInit; + Int32 i; + + if (nblock < 10000) { + fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb ); + } else { + /* Calculate the location for quadrant, remembering to get + the alignment right. Assumes that &(block[0]) is at least + 2-byte aligned -- this should be ok since block is really + the first section of arr2. + */ + i = nblock+BZ_N_OVERSHOOT; + if (i & 1) i++; + quadrant = (UInt16*)(&(block[i])); + + /* (wfact-1) / 3 puts the default-factor-30 + transition point at very roughly the same place as + with v0.1 and v0.9.0. + Not that it particularly matters any more, since the + resulting compressed stream is now the same regardless + of whether or not we use the main sort or fallback sort. + */ + if (wfact < 1 ) wfact = 1; + if (wfact > 100) wfact = 100; + budgetInit = nblock * ((wfact-1) / 3); + budget = budgetInit; + + mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget ); + if (verb >= 3) + VPrintf3 ( " %d work, %d block, ratio %5.2f\n", + budgetInit - budget, + nblock, + (float)(budgetInit - budget) / + (float)(nblock==0 ? 1 : nblock) ); + if (budget < 0) { + if (verb >= 2) + VPrintf0 ( " too repetitive; using fallback" + " sorting algorithm\n" ); + fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb ); + } + } + + s->origPtr = -1; + for (i = 0; i < s->nblock; i++) + if (ptr[i] == 0) + { s->origPtr = i; break; }; + + AssertH( s->origPtr != -1, 1003 ); +} + + +/*-------------------------------------------------------------*/ +/*--- end blocksort.c ---*/ +/*-------------------------------------------------------------*/ diff --git a/lib/bzip2/bzlib_compress.c b/lib/bzip2/bzlib_compress.c new file mode 100644 index 0000000000..c8da1c72e9 --- /dev/null +++ b/lib/bzip2/bzlib_compress.c @@ -0,0 +1,714 @@ + +/*-------------------------------------------------------------*/ +/*--- Compression machinery (not incl block sorting) ---*/ +/*--- compress.c ---*/ +/*-------------------------------------------------------------*/ + +/*-- + This file is a part of bzip2 and/or libbzip2, a program and + library for lossless, block-sorting data compression. + + Copyright (C) 1996-2002 Julian R Seward. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + 2. The origin of this software must not be misrepresented; you must + not claim that you wrote the original software. If you use this + software in a product, an acknowledgment in the product + documentation would be appreciated but is not required. + + 3. Altered source versions must be plainly marked as such, and must + not be misrepresented as being the original software. + + 4. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS + OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + Julian Seward, Cambridge, UK. + jseward@acm.org + bzip2/libbzip2 version 1.0.6 of 6 September 2010 + Copyright (C) 1996-2010 Julian Seward <jseward@bzip.org> + + This program is based on (at least) the work of: + Mike Burrows + David Wheeler + Peter Fenwick + Alistair Moffat + Radford Neal + Ian H. Witten + Robert Sedgewick + Jon L. Bentley + + For more information on these sources, see the manual. +--*/ + +/* CHANGES + 0.9.0 -- original version. + 0.9.0a/b -- no changes in this file. + 0.9.0c -- changed setting of nGroups in sendMTFValues() + so as to do a bit better on small files +*/ + +#include "bzlib_private.h" + + +/*---------------------------------------------------*/ +/*--- Bit stream I/O ---*/ +/*---------------------------------------------------*/ + +/*---------------------------------------------------*/ +void BZ2_bsInitWrite ( EState* s ) +{ + s->bsLive = 0; + s->bsBuff = 0; +} + + +/*---------------------------------------------------*/ +static +void bsFinishWrite ( EState* s ) +{ + while (s->bsLive > 0) { + s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24); + s->numZ++; + s->bsBuff <<= 8; + s->bsLive -= 8; + } +} + + +/*---------------------------------------------------*/ +#define bsNEEDW(nz) \ +{ \ + while (s->bsLive >= 8) { \ + s->zbits[s->numZ] \ + = (UChar)(s->bsBuff >> 24); \ + s->numZ++; \ + s->bsBuff <<= 8; \ + s->bsLive -= 8; \ + } \ +} + + +/*---------------------------------------------------*/ +static +__inline__ +void bsW ( EState* s, Int32 n, UInt32 v ) +{ + bsNEEDW ( n ); + s->bsBuff |= (v << (32 - s->bsLive - n)); + s->bsLive += n; +} + + +/*---------------------------------------------------*/ +static +void bsPutUInt32 ( EState* s, UInt32 u ) +{ + bsW ( s, 8, (u >> 24) & 0xffL ); + bsW ( s, 8, (u >> 16) & 0xffL ); + bsW ( s, 8, (u >> 8) & 0xffL ); + bsW ( s, 8, u & 0xffL ); +} + + +/*---------------------------------------------------*/ +static +void bsPutUChar ( EState* s, UChar c ) +{ + bsW( s, 8, (UInt32)c ); +} + + +/*---------------------------------------------------*/ +/*--- The back end proper ---*/ +/*---------------------------------------------------*/ + +/*---------------------------------------------------*/ +static +void makeMaps_e ( EState* s ) +{ + Int32 i; + s->nInUse = 0; + for (i = 0; i < 256; i++) + if (s->inUse[i]) { + s->unseqToSeq[i] = s->nInUse; + s->nInUse++; + } +} + + +/*---------------------------------------------------*/ +static +void generateMTFValues ( EState* s ) +{ + UChar yy[256]; + Int32 i, j; + Int32 zPend; + Int32 wr; + Int32 EOB; + + /* + After sorting (eg, here), + s->arr1 [ 0 .. s->nblock-1 ] holds sorted order, + and + ((UChar*)s->arr2) [ 0 .. s->nblock-1 ] + holds the original block data. + + The first thing to do is generate the MTF values, + and put them in + ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ]. + Because there are strictly fewer or equal MTF values + than block values, ptr values in this area are overwritten + with MTF values only when they are no longer needed. + + The final compressed bitstream is generated into the + area starting at + (UChar*) (&((UChar*)s->arr2)[s->nblock]) + + These storage aliases are set up in bzCompressInit(), + except for the last one, which is arranged in + compressBlock(). + */ + UInt32* ptr = s->ptr; + UChar* block = s->block; + UInt16* mtfv = s->mtfv; + + makeMaps_e ( s ); + EOB = s->nInUse+1; + + for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0; + + wr = 0; + zPend = 0; + for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i; + + for (i = 0; i < s->nblock; i++) { + UChar ll_i; + AssertD ( wr <= i, "generateMTFValues(1)" ); + j = ptr[i]-1; if (j < 0) j += s->nblock; + ll_i = s->unseqToSeq[block[j]]; + AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" ); + + if (yy[0] == ll_i) { + zPend++; + } else { + + if (zPend > 0) { + zPend--; + while (True) { + if (zPend & 1) { + mtfv[wr] = BZ_RUNB; wr++; + s->mtfFreq[BZ_RUNB]++; + } else { + mtfv[wr] = BZ_RUNA; wr++; + s->mtfFreq[BZ_RUNA]++; + } + if (zPend < 2) break; + zPend = (zPend - 2) / 2; + }; + zPend = 0; + } + { + register UChar rtmp; + register UChar* ryy_j; + register UChar rll_i; + rtmp = yy[1]; + yy[1] = yy[0]; + ryy_j = &(yy[1]); + rll_i = ll_i; + while ( rll_i != rtmp ) { + register UChar rtmp2; + ryy_j++; + rtmp2 = rtmp; + rtmp = *ryy_j; + *ryy_j = rtmp2; + }; + yy[0] = rtmp; + j = ryy_j - &(yy[0]); + mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++; + } + + } + } + + if (zPend > 0) { + zPend--; + while (True) { + if (zPend & 1) { + mtfv[wr] = BZ_RUNB; wr++; + s->mtfFreq[BZ_RUNB]++; + } else { + mtfv[wr] = BZ_RUNA; wr++; + s->mtfFreq[BZ_RUNA]++; + } + if (zPend < 2) break; + zPend = (zPend - 2) / 2; + }; + zPend = 0; + } + + mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++; + + s->nMTF = wr; +} + + +/*---------------------------------------------------*/ +#define BZ_LESSER_ICOST 0 +#define BZ_GREATER_ICOST 15 + +static +void sendMTFValues ( EState* s ) +{ + Int32 v, t, i, j, gs, ge, totc, bt, bc, iter; + Int32 nSelectors, alphaSize, minLen, maxLen, selCtr; + Int32 nGroups, nBytes; + + /*-- + UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; + is a global since the decoder also needs it. + + Int32 code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; + Int32 rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; + are also globals only used in this proc. + Made global to keep stack frame size small. + --*/ + + + UInt16 cost[BZ_N_GROUPS]; + Int32 fave[BZ_N_GROUPS]; + + UInt16* mtfv = s->mtfv; + + if (s->verbosity >= 3) + VPrintf3( " %d in block, %d after MTF & 1-2 coding, " + "%d+2 syms in use\n", + s->nblock, s->nMTF, s->nInUse ); + + alphaSize = s->nInUse+2; + for (t = 0; t < BZ_N_GROUPS; t++) + for (v = 0; v < alphaSize; v++) + s->len[t][v] = BZ_GREATER_ICOST; + + /*--- Decide how many coding tables to use ---*/ + AssertH ( s->nMTF > 0, 3001 ); + if (s->nMTF < 200) nGroups = 2; else + if (s->nMTF < 600) nGroups = 3; else + if (s->nMTF < 1200) nGroups = 4; else + if (s->nMTF < 2400) nGroups = 5; else + nGroups = 6; + + /*--- Generate an initial set of coding tables ---*/ + { + Int32 nPart, remF, tFreq, aFreq; + + nPart = nGroups; + remF = s->nMTF; + gs = 0; + while (nPart > 0) { + tFreq = remF / nPart; + ge = gs-1; + aFreq = 0; + while (aFreq < tFreq && ge < alphaSize-1) { + ge++; + aFreq += s->mtfFreq[ge]; + } + + if (ge > gs + && nPart != nGroups && nPart != 1 + && ((nGroups-nPart) % 2 == 1)) { + aFreq -= s->mtfFreq[ge]; + ge--; + } + + if (s->verbosity >= 3) + VPrintf5( " initial group %d, [%d .. %d], " + "has %d syms (%4.1f%%)\n", + nPart, gs, ge, aFreq, + (100.0 * (float)aFreq) / (float)(s->nMTF) ); + + for (v = 0; v < alphaSize; v++) + if (v >= gs && v <= ge) + s->len[nPart-1][v] = BZ_LESSER_ICOST; else + s->len[nPart-1][v] = BZ_GREATER_ICOST; + + nPart--; + gs = ge+1; + remF -= aFreq; + } + } + + /*--- + Iterate up to BZ_N_ITERS times to improve the tables. + ---*/ + for (iter = 0; iter < BZ_N_ITERS; iter++) { + + for (t = 0; t < nGroups; t++) fave[t] = 0; + + for (t = 0; t < nGroups; t++) + for (v = 0; v < alphaSize; v++) + s->rfreq[t][v] = 0; + + /*--- + Set up an auxiliary length table which is used to fast-track + the common case (nGroups == 6). + ---*/ + if (nGroups == 6) { + for (v = 0; v < alphaSize; v++) { + s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v]; + s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v]; + s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v]; + } + } + + nSelectors = 0; + totc = 0; + gs = 0; + while (True) { + + /*--- Set group start & end marks. --*/ + if (gs >= s->nMTF) break; + ge = gs + BZ_G_SIZE - 1; + if (ge >= s->nMTF) ge = s->nMTF-1; + + /*-- + Calculate the cost of this group as coded + by each of the coding tables. + --*/ + for (t = 0; t < nGroups; t++) cost[t] = 0; + + if (nGroups == 6 && 50 == ge-gs+1) { + /*--- fast track the common case ---*/ + register UInt32 cost01, cost23, cost45; + register UInt16 icv; + cost01 = cost23 = cost45 = 0; + +# define BZ_ITER(nn) \ + icv = mtfv[gs+(nn)]; \ + cost01 += s->len_pack[icv][0]; \ + cost23 += s->len_pack[icv][1]; \ + cost45 += s->len_pack[icv][2]; \ + + BZ_ITER(0); BZ_ITER(1); BZ_ITER(2); BZ_ITER(3); BZ_ITER(4); + BZ_ITER(5); BZ_ITER(6); BZ_ITER(7); BZ_ITER(8); BZ_ITER(9); + BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14); + BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19); + BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24); + BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29); + BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34); + BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39); + BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44); + BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49); + +# undef BZ_ITER + + cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16; + cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16; + cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16; + + } else { + /*--- slow version which correctly handles all situations ---*/ + for (i = gs; i <= ge; i++) { + UInt16 icv = mtfv[i]; + for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv]; + } + } + + /*-- + Find the coding table which is best for this group, + and record its identity in the selector table. + --*/ + bc = 999999999; bt = -1; + for (t = 0; t < nGroups; t++) + if (cost[t] < bc) { bc = cost[t]; bt = t; }; + totc += bc; + fave[bt]++; + s->selector[nSelectors] = bt; + nSelectors++; + + /*-- + Increment the symbol frequencies for the selected table. + --*/ + if (nGroups == 6 && 50 == ge-gs+1) { + /*--- fast track the common case ---*/ + +# define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++ + + BZ_ITUR(0); BZ_ITUR(1); BZ_ITUR(2); BZ_ITUR(3); BZ_ITUR(4); + BZ_ITUR(5); BZ_ITUR(6); BZ_ITUR(7); BZ_ITUR(8); BZ_ITUR(9); + BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14); + BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19); + BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24); + BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29); + BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34); + BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39); + BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44); + BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49); + +# undef BZ_ITUR + + } else { + /*--- slow version which correctly handles all situations ---*/ + for (i = gs; i <= ge; i++) + s->rfreq[bt][ mtfv[i] ]++; + } + + gs = ge+1; + } + if (s->verbosity >= 3) { + VPrintf2 ( " pass %d: size is %d, grp uses are ", + iter+1, totc/8 ); + for (t = 0; t < nGroups; t++) + VPrintf1 ( "%d ", fave[t] ); + VPrintf0 ( "\n" ); + } + + /*-- + Recompute the tables based on the accumulated frequencies. + --*/ + /* maxLen was changed from 20 to 17 in bzip2-1.0.3. See + comment in huffman.c for details. */ + for (t = 0; t < nGroups; t++) + BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), + alphaSize, 17 /*20*/ ); + } + + + AssertH( nGroups < 8, 3002 ); + AssertH( nSelectors < 32768 && + nSelectors <= (2 + (900000 / BZ_G_SIZE)), + 3003 ); + + + /*--- Compute MTF values for the selectors. ---*/ + { + UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp; + for (i = 0; i < nGroups; i++) pos[i] = i; + for (i = 0; i < nSelectors; i++) { + ll_i = s->selector[i]; + j = 0; + tmp = pos[j]; + while ( ll_i != tmp ) { + j++; + tmp2 = tmp; + tmp = pos[j]; + pos[j] = tmp2; + }; + pos[0] = tmp; + s->selectorMtf[i] = j; + } + }; + + /*--- Assign actual codes for the tables. --*/ + for (t = 0; t < nGroups; t++) { + minLen = 32; + maxLen = 0; + for (i = 0; i < alphaSize; i++) { + if (s->len[t][i] > maxLen) maxLen = s->len[t][i]; + if (s->len[t][i] < minLen) minLen = s->len[t][i]; + } + AssertH ( !(maxLen > 17 /*20*/ ), 3004 ); + AssertH ( !(minLen < 1), 3005 ); + BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), + minLen, maxLen, alphaSize ); + } + + /*--- Transmit the mapping table. ---*/ + { + Bool inUse16[16]; + for (i = 0; i < 16; i++) { + inUse16[i] = False; + for (j = 0; j < 16; j++) + if (s->inUse[i * 16 + j]) inUse16[i] = True; + } + + nBytes = s->numZ; + for (i = 0; i < 16; i++) + if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0); + + for (i = 0; i < 16; i++) + if (inUse16[i]) + for (j = 0; j < 16; j++) { + if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0); + } + + if (s->verbosity >= 3) + VPrintf1( " bytes: mapping %d, ", s->numZ-nBytes ); + } + + /*--- Now the selectors. ---*/ + nBytes = s->numZ; + bsW ( s, 3, nGroups ); + bsW ( s, 15, nSelectors ); + for (i = 0; i < nSelectors; i++) { + for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1); + bsW(s,1,0); + } + if (s->verbosity >= 3) + VPrintf1( "selectors %d, ", s->numZ-nBytes ); + + /*--- Now the coding tables. ---*/ + nBytes = s->numZ; + + for (t = 0; t < nGroups; t++) { + Int32 curr = s->len[t][0]; + bsW ( s, 5, curr ); + for (i = 0; i < alphaSize; i++) { + while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ }; + while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ }; + bsW ( s, 1, 0 ); + } + } + + if (s->verbosity >= 3) + VPrintf1 ( "code lengths %d, ", s->numZ-nBytes ); + + /*--- And finally, the block data proper ---*/ + nBytes = s->numZ; + selCtr = 0; + gs = 0; + while (True) { + if (gs >= s->nMTF) break; + ge = gs + BZ_G_SIZE - 1; + if (ge >= s->nMTF) ge = s->nMTF-1; + AssertH ( s->selector[selCtr] < nGroups, 3006 ); + + if (nGroups == 6 && 50 == ge-gs+1) { + /*--- fast track the common case ---*/ + UInt16 mtfv_i; + UChar* s_len_sel_selCtr + = &(s->len[s->selector[selCtr]][0]); + Int32* s_code_sel_selCtr + = &(s->code[s->selector[selCtr]][0]); + +# define BZ_ITAH(nn) \ + mtfv_i = mtfv[gs+(nn)]; \ + bsW ( s, \ + s_len_sel_selCtr[mtfv_i], \ + s_code_sel_selCtr[mtfv_i] ) + + BZ_ITAH(0); BZ_ITAH(1); BZ_ITAH(2); BZ_ITAH(3); BZ_ITAH(4); + BZ_ITAH(5); BZ_ITAH(6); BZ_ITAH(7); BZ_ITAH(8); BZ_ITAH(9); + BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14); + BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19); + BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24); + BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29); + BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34); + BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39); + BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44); + BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49); + +# undef BZ_ITAH + + } else { + /*--- slow version which correctly handles all situations ---*/ + for (i = gs; i <= ge; i++) { + bsW ( s, + s->len [s->selector[selCtr]] [mtfv[i]], + s->code [s->selector[selCtr]] [mtfv[i]] ); + } + } + + + gs = ge+1; + selCtr++; + } + AssertH( selCtr == nSelectors, 3007 ); + + if (s->verbosity >= 3) + VPrintf1( "codes %d\n", s->numZ-nBytes ); + else /* squash compiler 'used but not set' warning */ + nBytes = nBytes; +} + + +/*---------------------------------------------------*/ +void BZ2_compressBlock ( EState* s, Bool is_last_block ) +{ + if (s->nblock > 0) { + + BZ_FINALISE_CRC ( s->blockCRC ); + s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31); + s->combinedCRC ^= s->blockCRC; + if (s->blockNo > 1) s->numZ = 0; + + if (s->verbosity >= 2) + VPrintf4( " block %d: crc = 0x%08x, " + "combined CRC = 0x%08x, size = %d\n", + s->blockNo, s->blockCRC, s->combinedCRC, s->nblock ); + + BZ2_blockSort ( s ); + } + + s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]); + + /*-- If this is the first block, create the stream header. --*/ + if (s->blockNo == 1) { + BZ2_bsInitWrite ( s ); + bsPutUChar ( s, BZ_HDR_B ); + bsPutUChar ( s, BZ_HDR_Z ); + bsPutUChar ( s, BZ_HDR_h ); + bsPutUChar ( s, (UChar)(BZ_HDR_0 + s->blockSize100k) ); + } + + if (s->nblock > 0) { + + bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 ); + bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 ); + bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 ); + + /*-- Now the block's CRC, so it is in a known place. --*/ + bsPutUInt32 ( s, s->blockCRC ); + + /*-- + Now a single bit indicating (non-)randomisation. + As of version 0.9.5, we use a better sorting algorithm + which makes randomisation unnecessary. So always set + the randomised bit to 'no'. Of course, the decoder + still needs to be able to handle randomised blocks + so as to maintain backwards compatibility with + older versions of bzip2. + --*/ + bsW(s,1,0); + + bsW ( s, 24, s->origPtr ); + generateMTFValues ( s ); + sendMTFValues ( s ); + } + + + /*-- If this is the last block, add the stream trailer. --*/ + if (is_last_block) { + + bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 ); + bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 ); + bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 ); + bsPutUInt32 ( s, s->combinedCRC ); + if (s->verbosity >= 2) + VPrintf1( " final combined CRC = 0x%08x\n ", s->combinedCRC ); + bsFinishWrite ( s ); + } +} + + +/*-------------------------------------------------------------*/ +/*--- end compress.c ---*/ +/*-------------------------------------------------------------*/ |