diff options
| -rw-r--r-- | arch/arm/mach-zynqmp/Kconfig | 11 | ||||
| -rw-r--r-- | arch/arm/mach-zynqmp/spl.c | 14 | ||||
| -rw-r--r-- | configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 1 | ||||
| -rw-r--r-- | configs/xilinx_zynqmp_p_a2197_00_revA_defconfig | 1 | ||||
| -rw-r--r-- | configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 |
5 files changed, 10 insertions, 18 deletions
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig index 6cf17eb94e..d82a737a69 100644 --- a/arch/arm/mach-zynqmp/Kconfig +++ b/arch/arm/mach-zynqmp/Kconfig @@ -117,17 +117,6 @@ config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED config ZYNQ_SDHCI_MAX_FREQ default 200000000 -config SPL_ZYNQMP_TWO_SDHCI - bool "Enable booting from both SDHCIs" - depends on SPL - help - This option reflects that board has two SDHCI controllers which - platform can use as boot device. This option ensures that SPL will - setup BOOT_DEVICE_MMC2 for SDHCI1 controller and BOOT_DEVICE_MMC1 for - SDHCI0 controller. Platforms which have only one SDHCI controller - shouldn't enable this option because it for software SDHCI0 or SDHCI1 - are both covered by BOOT_DEVICE_MMC1. - config SPL_ZYNQMP_ALT_BOOTMODE hex default 0x0 if JTAG_MODE diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index 527646875a..c0398b9116 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -58,6 +58,16 @@ void spl_board_init(void) } #endif +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = spl_boot_device(); + + if (spl_boot_list[0] == BOOT_DEVICE_MMC1) + spl_boot_list[1] = BOOT_DEVICE_MMC2; + if (spl_boot_list[0] == BOOT_DEVICE_MMC2) + spl_boot_list[1] = BOOT_DEVICE_MMC1; +} + u32 spl_boot_device(void) { u32 reg = 0; @@ -81,11 +91,7 @@ u32 spl_boot_device(void) #ifdef CONFIG_SPL_MMC_SUPPORT case SD_MODE1: case SD1_LSHFT_MODE: /* not working on silicon v1 */ -/* if both controllers enabled, then these two are the second controller */ -#ifdef CONFIG_SPL_ZYNQMP_TWO_SDHCI return BOOT_DEVICE_MMC2; -/* else, fall through, the one SDHCI controller that is enabled is number 1 */ -#endif case SD_MODE: case EMMC_MODE: return BOOT_DEVICE_MMC1; diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 177558db41..280983d187 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -7,7 +7,6 @@ CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_ZYNQMP_TWO_SDHCI=y CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y diff --git a/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig index ba2cbaba58..f206be8a31 100644 --- a/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig +++ b/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig @@ -9,7 +9,6 @@ CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y -CONFIG_SPL_ZYNQMP_TWO_SDHCI=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index 7731407118..62c3730515 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -6,7 +6,6 @@ CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ZYNQMP_USB=y -CONFIG_SPL_ZYNQMP_TWO_SDHCI=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y |