summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/start.S12
-rw-r--r--arch/arm/cpu/armv7/tegra2/ap20.h7
-rw-r--r--arch/arm/cpu/armv7/tegra2/board.c8
-rw-r--r--arch/arm/cpu/armv7/tegra2/config.mk3
-rw-r--r--arch/arm/cpu/armv7/tegra2/lowlevel_init.S118
5 files changed, 1 insertions, 147 deletions
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index b05be6cc94..6a77c71e1d 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -82,18 +82,6 @@ _end_vect:
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
-#ifdef CONFIG_TEGRA2
-/*
- * Tegra2 uses 2 separate CPUs - the AVP (ARM7TDMI) and the CPU (dual A9s).
- * U-Boot runs on the AVP first, setting things up for the CPU (PLLs,
- * muxes, clocks, clamps, etc.). Then the AVP halts, and expects the CPU
- * to pick up its reset vector, which points here.
- */
-.globl _armboot_start
-_armboot_start:
- .word _start
-#endif
-
/*
* These are defined in the board-specific linker script.
*/
diff --git a/arch/arm/cpu/armv7/tegra2/ap20.h b/arch/arm/cpu/armv7/tegra2/ap20.h
index 1bb48d6a00..a4b4d73a40 100644
--- a/arch/arm/cpu/armv7/tegra2/ap20.h
+++ b/arch/arm/cpu/armv7/tegra2/ap20.h
@@ -95,13 +95,8 @@
#define HALT_COP_EVENT_IRQ_1 (1 << 11)
#define HALT_COP_EVENT_FIQ_1 (1 << 9)
-/* Prototypes */
-
+/* Start up the tegra2 SOC */
void tegra2_start(void);
-void uart_init(void);
-void udelay(unsigned long);
-void cold_boot(void);
-void cache_configure(void);
/* This is the main entry into U-Boot, used by the Cortex-A9 */
extern void _start(void);
diff --git a/arch/arm/cpu/armv7/tegra2/board.c b/arch/arm/cpu/armv7/tegra2/board.c
index 4530194bf7..e6fe4fd4bc 100644
--- a/arch/arm/cpu/armv7/tegra2/board.c
+++ b/arch/arm/cpu/armv7/tegra2/board.c
@@ -55,14 +55,6 @@ unsigned int query_sdram_size(void)
}
}
-void s_init(void)
-{
-#ifndef CONFIG_ICACHE_OFF
- icache_enable();
-#endif
- invalidate_dcache();
-}
-
int dram_init(void)
{
unsigned long rs;
diff --git a/arch/arm/cpu/armv7/tegra2/config.mk b/arch/arm/cpu/armv7/tegra2/config.mk
index f84fdc8f94..8f9bdc9ff0 100644
--- a/arch/arm/cpu/armv7/tegra2/config.mk
+++ b/arch/arm/cpu/armv7/tegra2/config.mk
@@ -24,9 +24,6 @@
# MA 02111-1307 USA
#
-# Use ARMv4 for Tegra2 - initial code runs on the AVP, which is an ARM7TDI.
-PLATFORM_CPPFLAGS += -march=armv4
-
# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build this
# file with compatible flags
ifdef CONFIG_TEGRA2
diff --git a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S
index f24a2ff57d..6b866476ce 100644
--- a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S
@@ -26,14 +26,6 @@
#include <config.h>
#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config file
-
-.global invalidate_dcache
-invalidate_dcache:
- mov pc, lr
-
.align 5
.global reset_cpu
reset_cpu:
@@ -47,113 +39,3 @@ _loop_forever:
b _loop_forever
rstctl:
.word PRM_RSTCTRL
-
-.globl lowlevel_init
-lowlevel_init:
- ldr sp, SRAM_STACK
- str ip, [sp]
- mov ip, lr
- bl s_init @ go setup pll, mux & memory
- ldr ip, [sp]
- mov lr, ip
-
- mov pc, lr @ back to arch calling code
-
-
-.globl startup_cpu
-startup_cpu:
- @ Initialize the AVP, clocks, and memory controller
- @ SDRAM is guaranteed to be on at this point
-
- ldr r0, =cold_boot @ R0 = reset vector for CPU
- bl start_cpu @ start the CPU
-
- @ Transfer control to the AVP code
- bl halt_avp
-
- @ Should never get here
-_loop_forever2:
- b _loop_forever2
-
-.globl cache_configure
-cache_configure:
- stmdb r13!,{r14}
- @ invalidate instruction cache
- mov r1, #0
- mcr p15, 0, r1, c7, c5, 0
-
- @ invalidate the i&d tlb entries
- mcr p15, 0, r1, c8, c5, 0
- mcr p15, 0, r1, c8, c6, 0
-
- @ enable instruction cache
- mrc p15, 0, r1, c1, c0, 0
- orr r1, r1, #(1<<12)
- mcr p15, 0, r1, c1, c0, 0
-
- bl enable_scu
-
- @ enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg
- mrc p15, 0, r0, c1, c0, 1
- orr r0, r0, #0x41
- mcr p15, 0, r0, c1, c0, 1
-
- @ Now flush the Dcache
- mov r0, #0
- @ 256 cache lines
- mov r1, #256
-
-invalidate_loop:
- add r1, r1, #-1
- mov r0, r1, lsl #5
- @ invalidate d-cache using line (way0)
- mcr p15, 0, r0, c7, c6, 2
-
- orr r2, r0, #(1<<30)
- @ invalidate d-cache using line (way1)
- mcr p15, 0, r2, c7, c6, 2
-
- orr r2, r0, #(2<<30)
- @ invalidate d-cache using line (way2)
- mcr p15, 0, r2, c7, c6, 2
-
- orr r2, r0, #(3<<30)
- @ invalidate d-cache using line (way3)
- mcr p15, 0, r2, c7, c6, 2
- cmp r1, #0
- bne invalidate_loop
-
- @ FIXME: should have ap20's L2 disabled too?
-invalidate_done:
- ldmia r13!,{pc}
-
-.globl cold_boot
-cold_boot:
- msr cpsr_c, #0xD3
- @ Check current processor: CPU or AVP?
- @ If CPU, go to CPU boot code, else continue on AVP path
-
- ldr r0, =NV_PA_PG_UP_BASE
- ldr r1, [r0]
- ldr r2, =PG_UP_TAG_AVP
-
- @ are we the CPU?
- ldr sp, CPU_STACK
- cmp r1, r2
- @ yep, we are the CPU
- bne _armboot_start
-
- @ AVP initialization follows this path
- ldr sp, AVP_STACK
- @ Init AVP and start CPU
- b startup_cpu
-
- @ the literal pools origin
- .ltorg
-
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
-AVP_STACK:
- .word EARLY_AVP_STACK
-CPU_STACK:
- .word EARLY_CPU_STACK