diff options
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/mmc.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-sunxi/board.c | 34 | ||||
| -rw-r--r-- | board/sunxi/board.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/sunxi_mmc.c | 17 |
4 files changed, 12 insertions, 43 deletions
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 3da360b177..cb52e64873 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -127,5 +127,4 @@ struct sunxi_mmc { #define SUNXI_MMC_COMMON_RESET (1 << 18) struct mmc *sunxi_mmc_init(int sdc_no); -int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 3f5116bcb6..06a1986efd 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -203,7 +203,8 @@ DECLARE_GLOBAL_DATA_PTR; */ u32 spl_boot_device(void) { - __maybe_unused struct mmc *mmc0, *mmc1; + int boot_source; + /* * When booting from the SD card or NAND memory, the "eGON.BT0" * signature is expected to be found in memory at the address 0x0004 @@ -223,32 +224,19 @@ u32 spl_boot_device(void) if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */ return BOOT_DEVICE_BOARD; -#ifdef CONFIG_SPL_SPI_SUNXI - if (readb(SPL_ADDR + 0x28) == SUNXI_BOOTED_FROM_SPI) - return BOOT_DEVICE_SPI; -#endif - - /* The BROM will try to boot from mmc0 first, so try that first. */ -#ifdef CONFIG_MMC - mmc_initialize(gd->bd); - mmc0 = find_mmc_device(0); - if (sunxi_mmc_has_egon_boot_signature(mmc0)) + boot_source = readb(SPL_ADDR + 0x28); + switch (boot_source) { + case SUNXI_BOOTED_FROM_MMC0: return BOOT_DEVICE_MMC1; -#endif - - /* Fallback to booting NAND if enabled. */ - if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT)) + case SUNXI_BOOTED_FROM_NAND: return BOOT_DEVICE_NAND; - -#ifdef CONFIG_MMC - if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) { - mmc1 = find_mmc_device(1); - if (sunxi_mmc_has_egon_boot_signature(mmc1)) - return BOOT_DEVICE_MMC2; + case SUNXI_BOOTED_FROM_MMC2: + return BOOT_DEVICE_MMC2; + case SUNXI_BOOTED_FROM_SPI: + return BOOT_DEVICE_SPI; } -#endif - panic("Could not determine boot source\n"); + panic("Unknown boot source %d\n", boot_source); return -1; /* Never reached */ } diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 320958af28..f6e28b050d 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -369,8 +369,7 @@ int board_mmc_init(bd_t *bis) * are searched there first. Note we only do this for u-boot proper, * not for the SPL, see spl_boot_device(). */ - if (!sunxi_mmc_has_egon_boot_signature(mmc0) && - sunxi_mmc_has_egon_boot_signature(mmc1)) { + if (readb(SPL_ADDR + 0x28) == SUNXI_BOOTED_FROM_MMC2) { /* Booting from emmc / mmc2, swap */ mmc0->block_dev.devnum = 1; mmc1->block_dev.devnum = 0; diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 3be9a90a6b..5d8abdc897 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -445,23 +445,6 @@ static int sunxi_mmc_getcd(struct mmc *mmc) return !gpio_get_value(cd_pin); } -int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc) -{ - char *buf = malloc(512); - int valid_signature = 0; - - if (buf == NULL) - panic("Failed to allocate memory\n"); - - if (mmc_getcd(mmc) && mmc_init(mmc) == 0 && - mmc->block_dev.block_read(&mmc->block_dev, 16, 1, buf) == 1 && - strncmp(&buf[4], "eGON.BT0", 8) == 0) - valid_signature = 1; - - free(buf); - return valid_signature; -} - static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd, .set_ios = sunxi_mmc_set_ios, |