diff options
| -rw-r--r-- | Makefile | 1 | ||||
| -rw-r--r-- | include/test/overlay.h | 16 | ||||
| -rw-r--r-- | include/test/suites.h | 1 | ||||
| -rw-r--r-- | lib/libfdt/fdt_overlay.c | 311 | ||||
| -rw-r--r-- | test/Kconfig | 1 | ||||
| -rw-r--r-- | test/cmd_ut.c | 6 | ||||
| -rw-r--r-- | test/overlay/Kconfig | 11 | ||||
| -rw-r--r-- | test/overlay/Makefile | 15 | ||||
| -rw-r--r-- | test/overlay/cmd_ut_overlay.c | 268 | ||||
| -rw-r--r-- | test/overlay/test-fdt-base.dts | 21 | ||||
| -rw-r--r-- | test/overlay/test-fdt-overlay.dts | 96 |
11 files changed, 698 insertions, 49 deletions
@@ -675,6 +675,7 @@ libs-$(CONFIG_HAS_POST) += post/ libs-y += test/ libs-y += test/dm/ libs-$(CONFIG_UT_ENV) += test/env/ +libs-$(CONFIG_UT_OVERLAY) += test/overlay/ libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) diff --git a/include/test/overlay.h b/include/test/overlay.h new file mode 100644 index 0000000000..392f28ff84 --- /dev/null +++ b/include/test/overlay.h @@ -0,0 +1,16 @@ +/* + * Copyright (c) 2016 NextThing Co + * Copyright (c) 2016 Free Electrons + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TEST_OVERLAY_H__ +#define __TEST_OVERLAY_H__ + +#include <test/test.h> + +/* Declare a new environment test */ +#define OVERLAY_TEST(_name, _flags) UNIT_TEST(_name, _flags, overlay_test) + +#endif /* __TEST_OVERLAY_H__ */ diff --git a/include/test/suites.h b/include/test/suites.h index f5790333ff..0e94feb07a 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -10,6 +10,7 @@ int do_ut_dm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +int do_ut_overlay(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); #endif /* __TEST_SUITES_H__ */ diff --git a/lib/libfdt/fdt_overlay.c b/lib/libfdt/fdt_overlay.c index 1dac8fd483..40b6d27455 100644 --- a/lib/libfdt/fdt_overlay.c +++ b/lib/libfdt/fdt_overlay.c @@ -5,6 +5,20 @@ #include "libfdt_internal.h" +/** + * overlay_get_target_phandle - retrieves the target phandle of a fragment + * @fdto: pointer to the device tree overlay blob + * @fragment: node offset of the fragment in the overlay + * + * overlay_get_target_phandle() retrieves the target phandle of an + * overlay fragment when that fragment uses a phandle (target + * property) instead of a path (target-path property). + * + * returns: + * the phandle pointed by the target property + * 0, if the phandle was not found + * -1, if the phandle was malformed + */ static uint32_t overlay_get_target_phandle(const void *fdto, int fragment) { const uint32_t *val; @@ -14,12 +28,26 @@ static uint32_t overlay_get_target_phandle(const void *fdto, int fragment) if (!val) return 0; - if ((*val == 0xffffffff) || (len != sizeof(*val))) - return 0xffffffff; + if ((*val == (uint32_t)-1) || (len != sizeof(*val))) + return (uint32_t)-1; return fdt32_to_cpu(*val); } +/** + * overlay_get_target - retrieves the target phandle of a fragment + * @fdt: Base device tree blob + * @fdto: Device tree overlay blob + * @fragment: node offset of the fragment in the overlay + * + * overlay_get_target() retrieves the target phandle in the base + * device tree of a fragment, no matter how the actual targetting is + * done (through a phandle or a path) + * + * returns: + * the targetted node offset in the base device tree + * Negative error code on error + */ static int overlay_get_target(const void *fdt, const void *fdto, int fragment) { @@ -28,7 +56,7 @@ static int overlay_get_target(const void *fdt, const void *fdto, /* Try first to do a phandle based lookup */ phandle = overlay_get_target_phandle(fdto, fragment); - if (phandle == -1) + if (phandle == (uint32_t)-1) return -FDT_ERR_BADPHANDLE; if (phandle) @@ -42,6 +70,20 @@ static int overlay_get_target(const void *fdt, const void *fdto, return fdt_path_offset(fdt, path); } +/** + * overlay_phandle_add_offset - Increases a phandle by an offset + * @fdt: Base device tree blob + * @node: Device tree overlay blob + * @name: Name of the property to modify (phandle or linux,phandle) + * @delta: offset to apply + * + * overlay_phandle_add_offset() increments a node phandle by a given + * offset. + * + * returns: + * 0 on success. + * Negative error code on error + */ static int overlay_phandle_add_offset(void *fdt, int node, const char *name, uint32_t delta) { @@ -64,6 +106,21 @@ static int overlay_phandle_add_offset(void *fdt, int node, return fdt_setprop_inplace_u32(fdt, node, name, adj_val); } +/** + * overlay_adjust_node_phandles - Offsets the phandles of a node + * @fdto: Device tree overlay blob + * @node: Offset of the node we want to adjust + * @delta: Offset to shift the phandles of + * + * overlay_adjust_node_phandles() adds a constant to all the phandles + * of a given node. This is mainly use as part of the overlay + * application process, when we want to update all the overlay + * phandles to not conflict with the overlays of the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ static int overlay_adjust_node_phandles(void *fdto, int node, uint32_t delta) { @@ -95,6 +152,20 @@ static int overlay_adjust_node_phandles(void *fdto, int node, return 0; } +/** + * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay + * @fdto: Device tree overlay blob + * @delta: Offset to shift the phandles of + * + * overlay_adjust_local_phandles() adds a constant to all the + * phandles of an overlay. This is mainly use as part of the overlay + * application process, when we want to update all the overlay + * phandles to not conflict with the overlays of the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ static int overlay_adjust_local_phandles(void *fdto, uint32_t delta) { /* @@ -103,6 +174,25 @@ static int overlay_adjust_local_phandles(void *fdto, uint32_t delta) return overlay_adjust_node_phandles(fdto, 0, delta); } +/** + * overlay_update_local_node_references - Adjust the overlay references + * @fdto: Device tree overlay blob + * @tree_node: Node offset of the node to operate on + * @fixup_node: Node offset of the matching local fixups node + * @delta: Offset to shift the phandles of + * + * overlay_update_local_nodes_references() update the phandles + * pointing to a node within the device tree overlay by adding a + * constant delta. + * + * This is mainly used as part of a device tree application process, + * where you want the device tree overlays phandles to not conflict + * with the ones from the base device tree before merging them. + * + * returns: + * 0 on success + * Negative error code on failure + */ static int overlay_update_local_node_references(void *fdto, int tree_node, int fixup_node, @@ -113,41 +203,49 @@ static int overlay_update_local_node_references(void *fdto, int ret; fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) { - const uint32_t *val = NULL; - uint32_t adj_val, index; + const unsigned char *fixup_val, *tree_val; const char *name; int fixup_len; int tree_len; + int i; - val = fdt_getprop_by_offset(fdto, fixup_prop, - &name, &fixup_len); - if (!val) + fixup_val = fdt_getprop_by_offset(fdto, fixup_prop, + &name, &fixup_len); + if (!fixup_val) return fixup_len; - index = fdt32_to_cpu(*val); - val = fdt_getprop(fdto, tree_node, name, &tree_len); - if (!val) + tree_val = fdt_getprop(fdto, tree_node, name, &tree_len); + if (!tree_val) return tree_len; - /* - * The index can be unaligned. - * - * Use a memcpy for the architectures that do not - * support unaligned accesses. - */ - memcpy(&adj_val, (unsigned char *)val + index, - sizeof(uint32_t)); - - adj_val = fdt32_to_cpu(adj_val); - adj_val += delta; - adj_val = cpu_to_fdt32(adj_val); - - ret = fdt_setprop_inplace_namelen_partial(fdto, tree_node, - name, strlen(name), - index, &adj_val, - sizeof(adj_val)); - if (ret) - return ret; + for (i = 0; i < fixup_len; i += sizeof(uint32_t)) { + uint32_t adj_val, index; + + index = *(uint32_t *)(fixup_val + i); + index = fdt32_to_cpu(index); + + /* + * phandles to fixup can be unaligned. + * + * Use a memcpy for the architectures that do + * not support unaligned accesses. + */ + memcpy(&adj_val, tree_val + index, sizeof(uint32_t)); + + adj_val = fdt32_to_cpu(adj_val); + adj_val += delta; + adj_val = cpu_to_fdt32(adj_val); + + ret = fdt_setprop_inplace_namelen_partial(fdto, + tree_node, + name, + strlen(name), + index, + &adj_val, + sizeof(adj_val)); + if (ret) + return ret; + } } fdt_for_each_subnode(fdto, fixup_child, fixup_node) { @@ -171,11 +269,28 @@ static int overlay_update_local_node_references(void *fdto, return 0; } -static int overlay_update_local_references(void *dto, uint32_t delta) +/** + * overlay_update_local_references - Adjust the overlay references + * @fdto: Device tree overlay blob + * @delta: Offset to shift the phandles of + * + * overlay_update_local_references() update all the phandles pointing + * to a node within the device tree overlay by adding a constant + * delta to not conflict with the base overlay. + * + * This is mainly used as part of a device tree application process, + * where you want the device tree overlays phandles to not conflict + * with the ones from the base device tree before merging them. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_update_local_references(void *fdto, uint32_t delta) { int fixups; - fixups = fdt_path_offset(dto, "/__local_fixups__"); + fixups = fdt_path_offset(fdto, "/__local_fixups__"); if (fixups < 0) { /* There's no local phandles to adjust, bail out */ if (fixups == -FDT_ERR_NOTFOUND) @@ -187,10 +302,33 @@ static int overlay_update_local_references(void *dto, uint32_t delta) /* * Update our local references from the root of the tree */ - return overlay_update_local_node_references(dto, 0, fixups, + return overlay_update_local_node_references(fdto, 0, fixups, delta); } +/** + * overlay_fixup_one_phandle - Set an overlay phandle to the base one + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * @symbols_off: Node offset of the symbols node in the base device tree + * @path: Path to a node holding a phandle in the overlay + * @path_len: number of path characters to consider + * @name: Name of the property holding the phandle reference in the overlay + * @name_len: number of name characters to consider + * @index: Index in the overlay property where the phandle is stored + * @label: Label of the node referenced by the phandle + * + * overlay_fixup_one_phandle() resolves an overlay phandle pointing to + * a node in the base device tree. + * + * This is part of the device tree overlay application process, when + * you want all the phandles in the overlay to point to the actual + * base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ static int overlay_fixup_one_phandle(void *fdt, void *fdto, int symbols_off, const char *path, uint32_t path_len, @@ -225,6 +363,25 @@ static int overlay_fixup_one_phandle(void *fdt, void *fdto, &phandle, sizeof(phandle)); }; +/** + * overlay_fixup_phandle - Set an overlay phandle to the base one + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * @symbols_off: Node offset of the symbols node in the base device tree + * @property: Property offset in the overlay holding the list of fixups + * + * overlay_fixup_phandle() resolves all the overlay phandles pointed + * to in a __local_fixup__ property, and updates them to match the + * phandles in use in the base device tree. + * + * This is part of the device tree overlay application process, when + * you want all the phandles in the overlay to point to the actual + * base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off, int property) { @@ -275,57 +432,98 @@ static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off, return 0; } -static int overlay_fixup_phandles(void *dt, void *dto) +/** + * overlay_fixup_phandles - Resolve the overlay phandles to the base + * device tree + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_fixup_phandles() resolves all the overlay phandles pointing + * to nodes in the base device tree. + * + * This is one of the steps of the device tree overlay application + * process, when you want all the phandles in the overlay to point to + * the actual base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_phandles(void *fdt, void *fdto) { int fixups_off, symbols_off; int property; - symbols_off = fdt_path_offset(dt, "/__symbols__"); - fixups_off = fdt_path_offset(dto, "/__fixups__"); + symbols_off = fdt_path_offset(fdt, "/__symbols__"); + fixups_off = fdt_path_offset(fdto, "/__fixups__"); + + fdt_for_each_property_offset(property, fdto, fixups_off) { + int ret; - fdt_for_each_property_offset(property, dto, fixups_off) - overlay_fixup_phandle(dt, dto, symbols_off, property); + ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property); + if (ret) + return ret; + } return 0; } -static int apply_overlay_node(void *dt, int target, - void *dto, int fragment) +/** + * overlay_apply_node - Merge an overlay fragment into the base device tree + * @fdt: Base Device Tree blob + * @target: Node offset in the base device tree to apply the fragment to + * @fdto: Device tree overlay blob + * @fragment: Node offset in the overlay holding the changes to merge + * + * overlay_apply_node() merges an overlay fragment into a target base + * device tree node pointed. + * + * This is part of the final step in the device tree overlay + * application process, when all the phandles have been adjusted and + * resolved and you just have to merge overlay into the base device + * tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_apply_node(void *fdt, int target, + void *fdto, int fragment) { int property; int node; - fdt_for_each_property_offset(property, dto, fragment) { + fdt_for_each_property_offset(property, fdto, fragment) { const char *name; const void *prop; int prop_len; int ret; - prop = fdt_getprop_by_offset(dto, property, &name, + prop = fdt_getprop_by_offset(fdto, property, &name, &prop_len); if (prop_len == -FDT_ERR_NOTFOUND) return -FDT_ERR_INTERNAL; if (prop_len < 0) return prop_len; - ret = fdt_setprop(dt, target, name, prop, prop_len); + ret = fdt_setprop(fdt, target, name, prop, prop_len); if (ret) return ret; } - fdt_for_each_subnode(dto, node, fragment) { - const char *name = fdt_get_name(dto, node, NULL); + fdt_for_each_subnode(fdto, node, fragment) { + const char *name = fdt_get_name(fdto, node, NULL); int nnode; int ret; - nnode = fdt_add_subnode(dt, target, name); + nnode = fdt_add_subnode(fdt, target, name); if (nnode == -FDT_ERR_EXISTS) - nnode = fdt_subnode_offset(dt, target, name); + nnode = fdt_subnode_offset(fdt, target, name); if (nnode < 0) return nnode; - ret = apply_overlay_node(dt, nnode, dto, node); + ret = overlay_apply_node(fdt, nnode, fdto, node); if (ret) return ret; } @@ -333,6 +531,21 @@ static int apply_overlay_node(void *dt, int target, return 0; } +/** + * overlay_merge - Merge an overlay into its base device tree + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_merge() merges an overlay into its base device tree. + * + * This is the final step in the device tree overlay application + * process, when all the phandles have been adjusted and resolved and + * you just have to merge overlay into the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ static int overlay_merge(void *dt, void *dto) { int fragment; @@ -350,7 +563,7 @@ static int overlay_merge(void *dt, void *dto) if (overlay < 0) return overlay; - ret = apply_overlay_node(dt, target, dto, overlay); + ret = overlay_apply_node(dt, target, dto, overlay); if (ret) return ret; } diff --git a/test/Kconfig b/test/Kconfig index d71c332eee..3643761bc6 100644 --- a/test/Kconfig +++ b/test/Kconfig @@ -17,3 +17,4 @@ config UT_TIME source "test/dm/Kconfig" source "test/env/Kconfig" +source "test/overlay/Kconfig" diff --git a/test/cmd_ut.c b/test/cmd_ut.c index f6e1f413db..14333423a1 100644 --- a/test/cmd_ut.c +++ b/test/cmd_ut.c @@ -19,6 +19,9 @@ static cmd_tbl_t cmd_ut_sub[] = { #if defined(CONFIG_UT_ENV) U_BOOT_CMD_MKENT(env, CONFIG_SYS_MAXARGS, 1, do_ut_env, "", ""), #endif +#ifdef CONFIG_UT_OVERLAY + U_BOOT_CMD_MKENT(overlay, CONFIG_SYS_MAXARGS, 1, do_ut_overlay, "", ""), +#endif #ifdef CONFIG_UT_TIME U_BOOT_CMD_MKENT(time, CONFIG_SYS_MAXARGS, 1, do_ut_time, "", ""), #endif @@ -68,6 +71,9 @@ static char ut_help_text[] = #ifdef CONFIG_UT_ENV "ut env [test-name]\n" #endif +#ifdef CONFIG_UT_OVERLAY + "ut overlay [test-name]\n" +#endif #ifdef CONFIG_UT_TIME "ut time - Very basic test of time functions\n" #endif diff --git a/test/overlay/Kconfig b/test/overlay/Kconfig new file mode 100644 index 0000000000..13c85428cb --- /dev/null +++ b/test/overlay/Kconfig @@ -0,0 +1,11 @@ +config UT_OVERLAY + bool "Enable Device Tree Overlays Unit Tests" + depends on OF_LIBFDT_OVERLAY + depends on UNIT_TEST + help + This enables the 'ut overlay' command which runs a series of unit + tests on the fdt overlay code. + If all is well then all tests pass although there will be a few + messages printed along the way. + Be warned that it requires an out-of-tree dtc compiler with patches + to support the DT overlays, otherwise it will fail. diff --git a/test/overlay/Makefile b/test/overlay/Makefile new file mode 100644 index 0000000000..907f085446 --- /dev/null +++ b/test/overlay/Makefile @@ -0,0 +1,15 @@ +# +# Copyright (c) 2016 NextThing Co +# Copyright (c) 2016 Free Electrons +# +# SPDX-License-Identifier: GPL-2.0+ +# + +# Test files +obj-y += cmd_ut_overlay.o + +DTC_FLAGS += -@ + +# DT overlays +obj-y += test-fdt-base.dtb.o +obj-y += test-fdt-overlay.dtb.o diff --git a/test/overlay/cmd_ut_overlay.c b/test/overlay/cmd_ut_overlay.c new file mode 100644 index 0000000000..87dc9328c6 --- /dev/null +++ b/test/overlay/cmd_ut_overlay.c @@ -0,0 +1,268 @@ +/* + * Copyright (c) 2016 NextThing Co + * Copyright (c) 2016 Free Electrons + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <errno.h> +#include <malloc.h> + +#include <linux/sizes.h> + +#include <test/ut.h> +#include <test/overlay.h> + +/* 4k ought to be enough for anybody */ +#define FDT_COPY_SIZE (4 * SZ_1K) + +extern u32 __dtb_test_fdt_base_begin; +extern u32 __dtb_test_fdt_overlay_begin; + +static int fdt_getprop_u32_by_index(void *fdt, const char *path, + const char *name, int index, + u32 *out) +{ + const fdt32_t *val; + int node_off; + int len; + + node_off = fdt_path_offset(fdt, path); + if (node_off < 0) + return node_off; + + val = fdt_getprop(fdt, node_off, name, &len); + if (!val || (len < (sizeof(uint32_t) * (index + 1)))) + return -FDT_ERR_NOTFOUND; + + *out = fdt32_to_cpu(*(val + index)); + + return 0; +} + +static int fdt_getprop_u32(void *fdt, const char *path, const char *name, + u32 *out) +{ + return fdt_getprop_u32_by_index(fdt, path, name, 0, out); +} + +static int fdt_getprop_str(void *fdt, const char *path, const char *name, + const char **out) +{ + int node_off; + + node_off = fdt_path_offset(fdt, path); + if (node_off < 0) + return node_off; + + return fdt_get_string(fdt, node_off, name, out); +} + +static int fdt_overlay_change_int_property(struct unit_test_state *uts) +{ + void *fdt = uts->priv; + u32 val = 0; + + ut_assertok(fdt_getprop_u32(fdt, "/test-node", "test-int-property", + &val)); + ut_asserteq(43, val); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_change_int_property, 0); + +static int fdt_overlay_change_str_property(struct unit_test_state *uts) +{ + void *fdt = uts->priv; + const char *val = NULL; + + ut_assertok(fdt_getprop_str(fdt, "/test-node", "test-str-property", + &val)); + ut_asserteq_str("foobar", val); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_change_str_property, 0); + +static int fdt_overlay_add_str_property(struct unit_test_state *uts) +{ + void *fdt = uts->priv; + const char *val = NULL; + + ut_assertok(fdt_getprop_str(fdt, "/test-node", "test-str-property-2", + &val)); + ut_asserteq_str("foobar2", val); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_add_str_property, 0); + +static int fdt_overlay_add_node_by_phandle(struct unit_test_state *uts) +{ + void *fdt = uts->priv; + int off; + + off = fdt_path_offset(fdt, "/test-node/new-node"); + ut_assert(off >= 0); + + ut_assertnonnull(fdt_getprop(fdt, off, "new-property", NULL)); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_add_node_by_phandle, 0); + +static int fdt_overlay_add_node_by_path(struct unit_test_state *uts) +{ + void *fdt = uts->priv; + int off; + + off = fdt_path_offset(fdt, "/new-node"); + ut_assert(off >= 0); + + ut_assertnonnull(fdt_getprop(fdt, off, "new-property", NULL)); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_add_node_by_path, 0); + +static int fdt_overlay_add_subnode_property(struct unit_test_state *uts) +{ + void *fdt = uts->priv; + int off; + + off = fdt_path_offset(fdt, "/test-node/sub-test-node"); + ut_assert(off >= 0); + + ut_assertnonnull(fdt_getprop(fdt, off, "sub-test-property", NULL)); + ut_assertnonnull(fdt_getprop(fdt, off, "new-sub-test-property", NULL)); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_add_subnode_property, 0); + +static int fdt_overlay_local_phandle(struct unit_test_state *uts) +{ + uint32_t local_phandle; + void *fdt = uts->priv; + u32 val = 0; + int off; + + off = fdt_path_offset(fdt, "/new-local-node"); + ut_assert(off >= 0); + + local_phandle = fdt_get_phandle(fdt, off); + ut_assert(local_phandle); + + ut_assertok(fdt_getprop_u32_by_index(fdt, "/", "test-several-phandle", + 0, &val)); + ut_asserteq(local_phandle, val); + + ut_assertok(fdt_getprop_u32_by_index(fdt, "/", "test-several-phandle", + 1, &val)); + ut_asserteq(local_phandle, val); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_local_phandle, 0); + +static int fdt_overlay_local_phandles(struct unit_test_state *uts) +{ + uint32_t local_phandle, test_phandle; + void *fdt = uts->priv; + u32 val = 0; + int off; + + off = fdt_path_offset(fdt, "/new-local-node"); + ut_assert(off >= 0); + + local_phandle = fdt_get_phandle(fdt, off); + ut_assert(local_phandle); + + off = fdt_path_offset(fdt, "/test-node"); + ut_assert(off >= 0); + + test_phandle = fdt_get_phandle(fdt, off); + ut_assert(test_phandle); + + ut_assertok(fdt_getprop_u32_by_index(fdt, "/", "test-phandle", 0, + &val)); + ut_asserteq(test_phandle, val); + + ut_assertok(fdt_getprop_u32_by_index(fdt, "/", "test-phandle", 1, + &val)); + ut_asserteq(local_phandle, val); + + return CMD_RET_SUCCESS; +} +OVERLAY_TEST(fdt_overlay_local_phandles, 0); + +int do_ut_overlay(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct unit_test *tests = ll_entry_start(struct unit_test, + overlay_test); + const int n_ents = ll_entry_count(struct unit_test, overlay_test); + struct unit_test_state *uts; + struct unit_test *test; + void *fdt_base = &__dtb_test_fdt_base_begin; + void *fdt_overlay = &__dtb_test_fdt_overlay_begin; + void *fdt_base_copy, *fdt_overlay_copy; + + uts = calloc(1, sizeof(*uts)); + if (!uts) + return -ENOMEM; + + ut_assertok(fdt_check_header(fdt_base)); + ut_assertok(fdt_check_header(fdt_overlay)); + + fdt_base_copy = malloc(FDT_COPY_SIZE); + if (!fdt_base_copy) + return -ENOMEM; + uts->priv = fdt_base_copy; + + fdt_overlay_copy = malloc(FDT_COPY_SIZE); + if (!fdt_overlay_copy) + return -ENOMEM; + + /* + * Resize the FDT to 4k so that we have room to operate on + * + * (and relocate it since the memory might be mapped + * read-only) + */ + ut_assertok(fdt_open_into(fdt_base, fdt_base_copy, FDT_COPY_SIZE)); + + /* + * Resize the overlay to 4k so that we have room to operate on + * + * (and relocate it since the memory might be mapped + * read-only) + */ + ut_assertok(fdt_open_into(fdt_overlay, fdt_overlay_copy, + FDT_COPY_SIZE)); + + /* Apply the overlay */ + ut_assertok(fdt_overlay_apply(fdt_base_copy, fdt_overlay_copy)); + + if (argc == 1) + printf("Running %d environment tests\n", n_ents); + + for (test = tests; test < tests + n_ents; test++) { + if (argc > 1 && strcmp(argv[1], test->name)) + continue; + printf("Test: %s\n", test->name); + + uts->start = mallinfo(); + + test->func(uts); + } + + printf("Failures: %d\n", uts->fail_count); + + free(fdt_overlay_copy); + free(fdt_base_copy); + free(uts); + + return uts->fail_count ? CMD_RET_FAILURE : 0; +} diff --git a/test/overlay/test-fdt-base.dts b/test/overlay/test-fdt-base.dts new file mode 100644 index 0000000000..2603adb682 --- /dev/null +++ b/test/overlay/test-fdt-base.dts @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2016 NextThing Co + * Copyright (c) 2016 Free Electrons + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +/ { + test: test-node { + test-int-property = <42>; + test-str-property = "foo"; + + subtest: sub-test-node { + sub-test-property; + }; + }; +}; + + diff --git a/test/overlay/test-fdt-overlay.dts b/test/overlay/test-fdt-overlay.dts new file mode 100644 index 0000000000..d30ecdf366 --- /dev/null +++ b/test/overlay/test-fdt-overlay.dts @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2016 NextThing Co + * Copyright (c) 2016 Free Electrons + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/plugin/; + +/ { + /* Test that we can change an int by another */ + fragment@0 { + target = <&test>; + + __overlay__ { + test-int-property = <43>; + }; + }; + + /* Test that we can replace a string by a longer one */ + fragment@1 { + target = <&test>; + + __overlay__ { + test-str-property = "foobar"; + }; + }; + + /* Test that we add a new property */ + fragment@2 { + target = <&test>; + + __overlay__ { + test-str-property-2 = "foobar2"; + }; + }; + + /* Test that we add a new node (by phandle) */ + fragment@3 { + target = <&test>; + + __overlay__ { + new-node { + new-property; + }; + }; + }; + + /* Test that we add a new node (by path) */ + fragment@4 { + target-path = "/"; + + __overlay__ { + new-node { + new-property; + }; + }; + }; + + fragment@5 { + target-path = "/"; + + __overlay__ { + local: new-local-node { + new-property; + }; + }; + }; + + fragment@6 { + target-path = "/"; + + __overlay__ { + test-phandle = <&test>, <&local>; + }; + }; + + fragment@7 { + target-path = "/"; + + __overlay__ { + test-several-phandle = <&local>, <&local>; + }; + }; + + fragment@8 { + target = <&test>; + + __overlay__ { + sub-test-node { + new-sub-test-property; + }; + }; + }; +}; |