diff options
| -rw-r--r-- | CHANGELOG | 3 | ||||
| -rw-r--r-- | MAKEALL | 6 | ||||
| -rw-r--r-- | Makefile | 5 | ||||
| -rw-r--r-- | board/mpl/common/common_util.c | 22 | ||||
| -rw-r--r-- | board/mpl/common/pci_parts.h | 6 | ||||
| -rw-r--r-- | board/mpl/mip405/init.S | 50 | ||||
| -rw-r--r-- | board/mpl/mip405/mip405.c | 209 | ||||
| -rw-r--r-- | board/mpl/mip405/u-boot.lds | 4 | ||||
| -rw-r--r-- | cpu/ppc4xx/405gp_pci.c | 6 | ||||
| -rw-r--r-- | cpu/ppc4xx/resetvec.S | 7 | ||||
| -rw-r--r-- | include/configs/MIP405.h | 50 | ||||
| -rw-r--r-- | include/configs/PIP405.h | 3 |
12 files changed, 275 insertions, 96 deletions
@@ -2,6 +2,9 @@ Changes since U-Boot 0.3.1: ====================================================================== +* Patch by Denis Peter, 04 June 2003: + add support for the MIP405T board + * Patches by Udi Finkelstein, 2 June 2003: - Added support for custom keyboards, initialized by defining a board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD . @@ -48,9 +48,9 @@ LIST_4xx=" \ CANBT CPCI405 CPCI4052 CPCI405AB \ CPCI440 CPCIISER4 CRAYL1 DASA_SIM \ DU405 EBONY ERIC MIP405 \ - ML2 OCRTC ORSG PCI405 \ - PIP405 PMC405 W7OLMC W7OLMG \ - WALNUT405 \ + MIP405T ML2 OCRTC ORSG \ + PCI405 PIP405 PMC405 W7OLMC \ + W7OLMG WALNUT405 \ " ######################################################################### @@ -449,6 +449,11 @@ ERIC_config:unconfig MIP405_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl +MIP405T_config:unconfig + @echo "#define CONFIG_MIP405T" >include/config.h + @echo "Enable subset config for MIP405T" + @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl + ML2_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx ml2 diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index 48ffbee506..aa2ba6f04c 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -59,6 +59,7 @@ int mpl_prg(unsigned long src,unsigned long size) flash_info_t *info; int i,rc; #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) + char *copystr = (char *)src; unsigned long *magic = (unsigned long *)src; #endif @@ -69,8 +70,25 @@ int mpl_prg(unsigned long src,unsigned long size) printf("Bad Magic number\n"); return -1; } - - start = 0 - size; + /* some more checks before we delete the Flash... */ + /* Checking the ISO_STRING prevents to program a + * wrong Firmware Image into the flash. + */ + i=4; /* skip Magic number */ + while(1) { + if(strncmp(©str[i],"MEV-",4)==0) + break; + if(i++>=0x100) { + printf("Firmware Image for unknown Target\n"); + return -1; + } + } + /* we have the ISO STRING, check */ + if(strncmp(©str[i],CONFIG_ISO_STRING,sizeof(CONFIG_ISO_STRING)-1)!=0) { + printf("Wrong Firmware Image: %s\n",©str[i]); + return -1; + } + start = 0 - size; for(i=info->sector_count-1;i>0;i--) { info->protect[i] = 0; /* unprotect this sector */ diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h index 944585f356..a8e3232fc0 100644 --- a/board/mpl/common/pci_parts.h +++ b/board/mpl/common/pci_parts.h @@ -108,17 +108,23 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = { /* PIIX4 IDE Controller Function 1 */ static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = { {PCI_COMMAND, 0x0001, 2}, /* enable IO access */ +#if !defined(CONFIG_MIP405T) {PCI_CFG_PIIX4_IDETIM, 0x80008000, 4}, /* enable Both IDE channels */ +#else + {PCI_CFG_PIIX4_IDETIM, 0x80000000, 4}, /* enable IDE channel0 */ +#endif { } /* end of device table */ }; /* PIIX4 USB Controller Function 2 */ static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = { +#if !defined(CONFIG_MIP405T) {PCI_INTERRUPT_LINE, 31, 1}, /* Int vector = 31 */ {PCI_BASE_ADDRESS_4, 0x0000E001, 4}, /* Set IO Address to 0xe000 to 0xe01F */ {PCI_LATENCY_TIMER, 0x80, 1}, /* Latency Timer 0x80 */ {0xC0, 0x2000, 2}, /* Legacy support */ {PCI_COMMAND, 0x0005, 2}, /* enable IO access and Master */ +#endif { } /* end of device table */ }; diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index f0a500ae13..ad3f78df45 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -50,9 +50,13 @@ #include "mip405.h" - .globl ext_bus_cntlr_init + .globl ext_bus_cntlr_init ext_bus_cntlr_init: - mflr r4 /* save link register */ + mflr r4 /* save link register */ + mfdcr r3,strap /* get strapping reg */ + andi. r0, r3, PSR_ROM_LOC /* mask out irrelevant bits */ + bnelr /* jump back if PCI boot */ + bl ..getAddr ..getAddr: mflr r3 /* get address of ..getAddr */ @@ -200,3 +204,45 @@ sdram_init: blr + +#if defined(CONFIG_BOOT_PCI) + .section .bootpg,"ax" + .globl _start_pci +/******************************************* + */ + +_start_pci: + /* first handle errata #68 / PCI_18 */ + iccci r0, r0 /* invalidate I-cache */ + lis r31, 0 + mticcr r31 /* ICCR = 0 (all uncachable) */ + isync + + mfccr0 r28 /* set CCR0[24] = 1 */ + ori r28, r28, 0x0080 + mtccr0 r28 + + /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */ + lis r28, 0xEF40 + addi r28, r28, 0x0004 + stw r31, 0x0C(r28) /* clear PMM0PCIHA */ + lis r29, 0xFFF8 /* open 512 kByte */ + addi r29, r29, 0x0001/* and enable this region */ + stwbrx r29, r0, r28 /* write PMM0MA */ + + lis r28, 0xEEC0 /* address of PCIC0_CFGADDR */ + addi r29, r28, 4 /* add 4 to r29 -> PCIC0_CFGDATA */ + + lis r31, 0x8000 /* set en bit bus 0 */ + ori r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */ + stwbrx r31, r0, r28 /* write it */ + + lwbrx r31, r0, r29 /* load XBCS register */ + oris r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */ + stwbrx r31, r0, r29 /* write back XBCS register */ + + nop + nop + b _start /* normal start */ +#endif + diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 96e4df580a..93d8679380 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -73,7 +73,7 @@ extern block_dev_desc_t * scsi_get_dev(int dev); extern block_dev_desc_t * ide_get_dev(int dev); #undef SDRAM_DEBUG - +#define ENABLE_ECC /* for ecc boards */ #define FALSE 0 #define TRUE 1 @@ -108,7 +108,27 @@ typedef struct { unsigned char sz; /* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */ unsigned char ecc; /* if true, ecc is enabled */ } sdram_t; - +#if defined(CONFIG_MIP405T) +const sdram_t sdram_table[] = { + { 0x01, /* MIP405T Rev A, 64MByte -1 Board */ + 3, /* Case Latenty = 3 */ + 3, /* trp 20ns / 7.5 ns datain[27] */ + 3, /* trcd 20ns /7.5 ns (datain[29]) */ + 6, /* tras 44ns /7.5 ns (datain[30]) */ + 4, /* tcpt 44 - 20ns = 24ns */ + 3, /* Address Mode = 3 (13x9x4) */ + 4, /* size value (64MByte) */ + 0}, /* ECC disabled */ + { 0xff, /* terminator */ + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff } +}; +#else const sdram_t sdram_table[] = { { 0x0f, /* Rev A, 128MByte -1 Board */ 3, /* Case Latenty = 3 */ @@ -155,7 +175,7 @@ const sdram_t sdram_table[] = { 0xff, 0xff } }; - +#endif /*CONFIG_MIP405T */ void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG @@ -222,17 +242,54 @@ int init_sdram (void) tctp_clocks; unsigned char cal_val; unsigned char bc; - unsigned long pbcr, sdram_tim, sdram_bank; - unsigned long *p; + unsigned long sdram_tim, sdram_bank; - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + /*i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);*/ (void) get_clocks (); gd->baudrate = 9600; serial_init (); + /* set up the pld */ + mtdcr (ebccfga, pb7ap); + mtdcr (ebccfgd, PLD_AP); + mtdcr (ebccfga, pb7cr); + mtdcr (ebccfgd, PLD_CR); + /* THIS IS OBSOLETE */ + /* set up the board rev reg*/ + mtdcr (ebccfga, pb5ap); + mtdcr (ebccfgd, BOARD_AP); + mtdcr (ebccfga, pb5cr); + mtdcr (ebccfgd, BOARD_CR); +#ifdef SDRAM_DEBUG + /* get all informations from PLD */ + serial_puts ("\nPLD Part 0x"); + bc = in8 (PLD_PART_REG); + write_hex (bc); + serial_puts ("\nPLD Vers 0x"); + bc = in8 (PLD_VERS_REG); + write_hex (bc); + serial_puts ("\nBoard Rev 0x"); + bc = in8 (PLD_BOARD_CFG_REG); + write_hex (bc); + serial_puts ("\n"); +#endif + /* check board */ + bc = in8 (PLD_PART_REG); +#if defined(CONFIG_MIP405T) + if((bc & 0x80)==0) + SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n"); +#else + if((bc & 0x80)==0x80) + SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n"); +#endif +#if !defined(CONFIG_MIP405T) + /* since the ECC initialisation needs some time, + * we show that we're alive + */ serial_puts ("\nInitializing SDRAM, Please stand by"); + /* set-up the chipselect machine */ mtdcr (ebccfga, pb0cr); /* get cs0 config reg */ - pbcr = mfdcr (ebccfgd); - if ((pbcr & 0x00002000) == 0) { + tmp = mfdcr (ebccfgd); + if ((tmp & 0x00002000) == 0) { /* MPS Boot, set up the flash */ mtdcr (ebccfga, pb1ap); mtdcr (ebccfgd, FLASH_AP); @@ -254,30 +311,8 @@ int init_sdram (void) mtdcr (ebccfgd, UART1_AP); mtdcr (ebccfga, pb3cr); mtdcr (ebccfgd, UART1_CR); - - /* set up the pld */ - mtdcr (ebccfga, pb7ap); - mtdcr (ebccfgd, PLD_AP); - mtdcr (ebccfga, pb7cr); - mtdcr (ebccfgd, PLD_CR); - /* set up the board rev reg */ - mtdcr (ebccfga, pb5ap); - mtdcr (ebccfgd, BOARD_AP); - mtdcr (ebccfga, pb5cr); - mtdcr (ebccfgd, BOARD_CR); - - -#ifdef SDRAM_DEBUG - out8 (PER_BOARD_ADDR, 0); - bc = in8 (PER_BOARD_ADDR); - serial_puts ("\nBoard Rev: "); - write_hex (bc); - serial_puts (" (PLD="); - bc = in8 (PLD_BOARD_CFG_REG); - write_hex (bc); - serial_puts (")\n"); #endif - bc = get_board_revcfg (); + bc = in8 (PLD_BOARD_CFG_REG); #ifdef SDRAM_DEBUG serial_puts ("\nstart SDRAM Setup\n"); serial_puts ("\nBoard Rev: "); @@ -367,9 +402,10 @@ int init_sdram (void) mtdcr (memcfga, mem_rtr); mtdcr (memcfgd, tmp); /* enable ECC if used */ -#if 1 +#if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI) if (sdram_table[i].ecc) { /* disable checking for all banks */ + unsigned long *p; #ifdef SDRAM_DEBUG serial_puts ("disable ECC.. "); #endif @@ -398,8 +434,6 @@ int init_sdram (void) *p++ = 0L; if (!((unsigned long) p % 0x00800000)) /* every 8MByte */ serial_puts ("."); - - } /* enable bank 0 */ serial_puts ("."); @@ -501,47 +535,69 @@ void ide_set_reset (int idereset) /* ------------------------------------------------------------------------- */ -/* - * Check Board Identity: - */ - -int checkboard (void) +void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var) { - unsigned char s[50]; - unsigned char bc, var, rc; +#if !defined(CONFIG_MIP405T) + unsigned char bc,rc,tmp; int i; - backup_t *b = (backup_t *) s; - puts ("Board: "); - - bc = get_board_revcfg (); - var = ~bc; - var &= 0xf; + bc = in8 (PLD_BOARD_CFG_REG); + tmp = ~bc; + tmp &= 0xf; rc = 0; for (i = 0; i < 4; i++) { rc <<= 1; - rc += (var & 0x1); - var >>= 1; + rc += (tmp & 0x1); + tmp >>= 1; } rc++; if((((bc>>4) & 0xf)==0x1) /* Rev B PCB with */ && (rc==0x1)) /* Population Option 1 is a -3 */ rc=3; + *pcbrev=(bc >> 4) & 0xf; + *var=rc; +#else + unsigned char bc; + bc = in8 (PLD_BOARD_CFG_REG); + *pcbrev=(bc >> 4) & 0xf; + *var=bc & 0xf ; +#endif +} + +/* + * Check Board Identity: + */ +/* serial String: "MIP405_1000" OR "MIP405T_1000" */ +#if !defined(CONFIG_MIP405T) +#define BOARD_NAME "MIP405" +#else +#define BOARD_NAME "MIP405T" +#endif + +int checkboard (void) +{ + unsigned char s[50]; + unsigned char bc, var; + int i; + backup_t *b = (backup_t *) s; + + puts ("Board: "); + get_pcbrev_var(&bc,&var); i = getenv_r ("serial#", s, 32); - if ((i == 0) || strncmp (s, "MIP405", 6)) { + if ((i == 0) || strncmp (s, BOARD_NAME,sizeof(BOARD_NAME))) { get_backup_values (b); if (strncmp (b->signature, "MPL\0", 4) != 0) { - puts ("### No HW ID - assuming MIP405"); - printf ("-%d Rev %c", rc, 'A' + ((bc >> 4) & 0xf)); + puts ("### No HW ID - assuming " BOARD_NAME); + printf ("-%d Rev %c", var, 'A' + bc); } else { - b->serial_name[6] = 0; - printf ("%s-%d Rev %c SN: %s", b->serial_name, rc, - 'A' + ((bc >> 4) & 0xf), &b->serial_name[7]); + b->serial_name[sizeof(BOARD_NAME)-1] = 0; + printf ("%s-%d Rev %c SN: %s", b->serial_name, var, + 'A' + bc, &b->serial_name[sizeof(BOARD_NAME)]); } } else { - s[6] = 0; - printf ("%s-%d Rev %c SN: %s", s, rc, 'A' + ((bc >> 4) & 0xf), - &s[7]); + s[sizeof(BOARD_NAME)-1] = 0; + printf ("%s-%d Rev %c SN: %s", s, var,'A' + bc, + &s[sizeof(BOARD_NAME)]); } bc = in8 (PLD_EXT_CONF_REG); printf (" Boot Config: 0x%x\n", bc); @@ -613,30 +669,23 @@ static int test_dram (unsigned long ramsize) int misc_init_r (void) { + /* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */ + if (mfdcr(strap) & PSR_ROM_LOC) + mtspr(ccr0, (mfspr(ccr0) & ~0x80)); + return (0); } void print_mip405_rev (void) { - unsigned char part, vers, cfg, rev; - - cfg = get_board_revcfg (); - vers = cfg; - vers &= 0xf; - rev = (((vers & 0x1) ? 0x8 : 0) | - ((vers & 0x2) ? 0x4 : 0) | - ((vers & 0x4) ? 0x2 : 0) | - ((vers & 0x8) ? 0x1 : 0)); - - vers=16-rev; - rev=vers; - if((rev==1) && ((cfg >> 4)==1)) /* Rev B PCB and -1 is a -3 */ - rev=3; + unsigned char part, vers, pcbrev, var; + + get_pcbrev_var(&pcbrev,&var); part = in8 (PLD_PART_REG); vers = in8 (PLD_VERS_REG); - printf ("Rev: MIP405-%d Rev %c PLD%d Vers %d\n", - rev, ((cfg >> 4) & 0xf) + 'A', part, vers); + printf ("Rev: " BOARD_NAME "-%d Rev %c PLD %d Vers %d\n", + var, pcbrev + 'A', part & 0x7F, vers); } extern void mem_test_reloc(void); @@ -683,24 +732,32 @@ void print_mip405_info (void) com_mode = in8 (PLD_COM_MODE_REG); ext = in8 (PLD_EXT_CONF_REG); - printf ("PLD Part %d version %d\n", part, vers); + printf ("PLD Part %d version %d\n", part & 0x7F, vers); printf ("Board Revision %c\n", ((cfg >> 4) & 0xf) + 'A'); printf ("Population Options %d %d %d %d\n", (cfg) & 0x1, (cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1); printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off"); printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3); - printf ("Test ist %x\n", com_mode); +#if !defined(CONFIG_MIP405T) printf ("User Config Switch %d %d %d %d %d %d %d %d\n", (ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1, (ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1, (ext >> 6) & 0x1, (ext >> 7) & 0x1); printf ("SER1 uses handshakes %s\n", (ext & 0x80) ? "DTR/DSR" : "RTS/CTS"); +#else + printf ("User Config Switch %d %d %d %d %d %d %d %d %d\n", + (ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1, + (ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1, + (ext >> 6) & 0x1,(ext >> 7) & 0x1,(ext >> 8) & 0x1); +#endif printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted"); printf ("IRQs:\n"); printf (" PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active"); +#if !defined(CONFIG_MIP405T) printf (" UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active"); printf (" UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active"); +#endif printf (" PIIX SMI: %s\n", (irq_reg & 0x10) ? "inactive" : "active"); printf (" PIIX INIT: %s\n", (irq_reg & 0x8) ? "inactive" : "active"); printf (" PIIX NMI: %s\n", (irq_reg & 0x4) ? "inactive" : "active"); diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds index 8ce0057b50..d2efd6d712 100644 --- a/board/mpl/mip405/u-boot.lds +++ b/board/mpl/mip405/u-boot.lds @@ -31,6 +31,10 @@ SECTIONS { *(.resetvec) } = 0xffff + .bootpg 0xFFFFF000 : + { + board/mpl/mip405/init.o (.bootpg) + } = 0xffff /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 728952312e..82142a2ccb 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -177,7 +177,7 @@ void pci_405gp_init(struct pci_controller *hose) * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF * Use byte reversed out routines to handle endianess. *--------------------------------------------------------------------------*/ - out32r(PMM0MA, pmmma[0]); /* ensure disabled b4 setting PMM0LA */ + out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */ out32r(PMM0LA, pmmla[0]); out32r(PMM0PCILA, pmmpcila[0]); out32r(PMM0PCIHA, pmmpciha[0]); @@ -186,7 +186,7 @@ void pci_405gp_init(struct pci_controller *hose) /*--------------------------------------------------------------------------+ * PMM1 is not used. Initialize them to zero. *--------------------------------------------------------------------------*/ - out32r(PMM1MA, pmmma[1]); /* ensure disabled b4 setting PMM2LA */ + out32r(PMM1MA, (pmmma[1]&~0x1)); out32r(PMM1LA, pmmla[1]); out32r(PMM1PCILA, pmmpcila[1]); out32r(PMM1PCIHA, pmmpciha[1]); @@ -195,7 +195,7 @@ void pci_405gp_init(struct pci_controller *hose) /*--------------------------------------------------------------------------+ * PMM2 is not used. Initialize them to zero. *--------------------------------------------------------------------------*/ - out32r(PMM2MA, pmmma[2]); /* ensure disabled b4 setting PMM2LA */ + out32r(PMM2MA, (pmmma[2]&~0x1)); out32r(PMM2LA, pmmla[2]); out32r(PMM2PCILA, pmmpcila[2]); out32r(PMM2PCIHA, pmmpciha[2]); diff --git a/cpu/ppc4xx/resetvec.S b/cpu/ppc4xx/resetvec.S index 53502254dc..e058bf037e 100644 --- a/cpu/ppc4xx/resetvec.S +++ b/cpu/ppc4xx/resetvec.S @@ -1,10 +1,13 @@ /* Copyright MontaVista Software Incorporated, 2000 */ - - +#include <config.h> .section .resetvec,"ax" #if defined(CONFIG_440) b _start_440 #else +#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405) + b _start_pci +#else b _start #endif +#endif diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index ec32a1ea73..b29eb8bed5 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -36,6 +36,16 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_MIP405 1 /* ...on a MIP405 board */ /*********************************************************** + * Note that it may also be a MIP405T board which is a subset of the + * MIP405 + ***********************************************************/ +/*********************************************************** + * WARNING: + * CONFIG_BOOT_PCI is only used for first boot-up and should + * NOT be enabled for production bootloader + ***********************************************************/ +/*#define CONFIG_BOOT_PCI 1*/ +/*********************************************************** * Clock ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ @@ -43,7 +53,7 @@ /*********************************************************** * Command definitions ***********************************************************/ -#define CONFIG_COMMANDS \ +#define MIP405_COMMON_CMDS \ (CONFIG_CMD_DFL | \ CFG_CMD_IDE | \ CFG_CMD_DHCP | \ @@ -56,12 +66,21 @@ CFG_CMD_REGINFO | \ CFG_CMD_DATE | \ CFG_CMD_ELF | \ - CFG_CMD_USB | \ CFG_CMD_MII | \ - CFG_CMD_DOC | \ CFG_CMD_SAVES | \ CFG_CMD_BSP ) +#if defined(CONFIG_MIP405T) +#define CONFIG_COMMANDS \ + MIP405_COMMON_CMDS +#else +#define CONFIG_COMMANDS \ + (MIP405_COMMON_CMDS | \ + CFG_CMD_USB | \ + CFG_CMD_DOC ) + +#endif + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -97,9 +116,9 @@ * Definitions for Serial Presence Detect EEPROM address * (to get SDRAM settings) ***************************************************************/ -#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0 +/*#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0 #define SDRAM_EEPROM_READ_ADDRESS 0xA1 - +*/ /************************************************************** * Environment definitions **************************************************************/ @@ -287,7 +306,12 @@ /************************************************************ * IDE/ATA stuff ************************************************************/ +#if defined(CONFIG_MIP405T) +#define CFG_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */ +#else #define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */ +#endif + #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ #define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */ @@ -351,13 +375,14 @@ /************************************************************ * USB support EXPERIMENTAL ************************************************************/ +#if !defined(CONFIG_MIP405T) #define CONFIG_USB_UHCI #define CONFIG_USB_KEYBOARD #define CONFIG_USB_STORAGE /* Enable needed helper functions */ #define CFG_DEVICE_DEREGISTER /* needs device_deregister */ - +#endif /************************************************************ * Debug support ************************************************************/ @@ -369,8 +394,19 @@ /************************************************************ * Ident ************************************************************/ + #define VERSION_TAG "released" -#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, MEV-10072-001 " VERSION_TAG +#if !defined(CONFIG_MIP405T) +#define CONFIG_ISO_STRING "MEV-10072-001" +#else +#define CONFIG_ISO_STRING "MEV-10082-001" +#endif + +#if !defined(CONFIG_BOOT_PCI) +#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG +#else +#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version" +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 5ecb537be0..8fbbe30bd2 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -368,7 +368,8 @@ * Ident ************************************************************/ #define VERSION_TAG "released" -#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, MEV-10066-001 " VERSION_TAG +#define CONFIG_ISO_STRING "MEV-10066-001" +#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG #endif /* __CONFIG_H */ |