diff options
| -rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 | ||||
| -rw-r--r-- | board/freescale/mx6slevk/mx6slevk.c | 49 | ||||
| -rw-r--r-- | board/freescale/mx6sxsabresd/mx6sxsabresd.c | 50 | ||||
| -rw-r--r-- | drivers/dfu/dfu.c | 29 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 1 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-mx6.c | 27 | ||||
| -rw-r--r-- | include/configs/mx6slevk.h | 14 | ||||
| -rw-r--r-- | include/configs/mx6sxsabresd.h | 14 | ||||
| -rw-r--r-- | include/usb/ehci-fsl.h | 2 | ||||
| -rwxr-xr-x | test/ums/ums_gadget_test.sh | 10 |
10 files changed, 194 insertions, 7 deletions
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h index d9db58c9a3..9ded3d851c 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -53,5 +53,10 @@ enum { MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0), MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0), MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0), + + MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID = IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0), + + MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0), }; #endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */ diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index cac6d73a7f..3834eec60e 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -20,6 +20,8 @@ #include <fsl_esdhc.h> #include <mmc.h> #include <netdev.h> +#include <usb.h> +#include <usb/ehci-fsl.h> DECLARE_GLOBAL_DATA_PTR; @@ -238,6 +240,48 @@ static int setup_fec(void) } #endif +#ifdef CONFIG_USB_EHCI_MX6 +#define USB_OTHERREGS_OFFSET 0x800 +#define UCTRL_PWR_POL (1 << 9) + +static iomux_v3_cfg_t const usb_otg_pads[] = { + /* OTG1 */ + MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), + /* OTG2 */ + MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) +}; + +static void setup_usb(void) +{ + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); +} + +int board_usb_phy_mode(int port) +{ + if (port == 1) + return USB_INIT_HOST; + else + return usb_phy_mode(port); +} + +int board_ehci_hcd_init(int port) +{ + u32 *usbnc_usb_ctrl; + + if (port > 1) + return -EINVAL; + + usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + + port * 4); + + /* Set Power polarity */ + setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); + + return 0; +} +#endif int board_early_init_f(void) { @@ -256,6 +300,11 @@ int board_init(void) #ifdef CONFIG_FEC_MXC setup_fec(); #endif + +#ifdef CONFIG_USB_EHCI_MX6 + setup_usb(); +#endif + return 0; } diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 8b959b9fc6..fd8bc72827 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -26,6 +26,8 @@ #include <power/pmic.h> #include <power/pfuze100_pmic.h> #include "../common/pfuze.h" +#include <usb.h> +#include <usb/ehci-fsl.h> DECLARE_GLOBAL_DATA_PTR; @@ -212,6 +214,49 @@ int power_init_board(void) return 0; } +#ifdef CONFIG_USB_EHCI_MX6 +#define USB_OTHERREGS_OFFSET 0x800 +#define UCTRL_PWR_POL (1 << 9) + +static iomux_v3_cfg_t const usb_otg_pads[] = { + /* OGT1 */ + MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), + /* OTG2 */ + MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) +}; + +static void setup_usb(void) +{ + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); +} + +int board_usb_phy_mode(int port) +{ + if (port == 1) + return USB_INIT_HOST; + else + return usb_phy_mode(port); +} + +int board_ehci_hcd_init(int port) +{ + u32 *usbnc_usb_ctrl; + + if (port > 1) + return -EINVAL; + + usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + + port * 4); + + /* Set Power polarity */ + setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); + + return 0; +} +#endif + int board_phy_config(struct phy_device *phydev) { /* @@ -242,6 +287,10 @@ int board_early_init_f(void) /* Active high for ncp692 */ gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); +#ifdef CONFIG_USB_EHCI_MX6 + setup_usb(); +#endif + return 0; } @@ -322,7 +371,6 @@ int board_mmc_init(bd_t *bis) return 0; } - int board_init(void) { /* Address of boot parameters */ diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index c0aba6e197..14cb366b01 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -544,10 +544,35 @@ struct dfu_entity *dfu_get_entity(int alt) int dfu_get_alt(char *name) { struct dfu_entity *dfu; + char *str; list_for_each_entry(dfu, &dfu_list, list) { - if (!strncmp(dfu->name, name, strlen(dfu->name))) - return dfu->alt; + if (dfu->name[0] != '/') { + if (!strncmp(dfu->name, name, strlen(dfu->name))) + return dfu->alt; + } else { + /* + * One must also consider absolute path + * (/boot/bin/uImage) available at dfu->name when + * compared "plain" file name (uImage) + * + * It is the case for e.g. thor gadget where lthor SW + * sends only the file name, so only the very last part + * of path must be checked for equality + */ + + str = strstr(dfu->name, name); + if (!str) + continue; + + /* + * Check if matching substring is the last element of + * dfu->name (uImage) + */ + if (strlen(dfu->name) == + ((str - dfu->name) + strlen(name))) + return dfu->alt; + } } return -ENODEV; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5520805af3..bc7606646b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -971,7 +971,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH); qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | QH_ENDPT1_EPS(USB_SPEED_HIGH)); - qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_token = diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 9ec5a0a539..951dd3b25f 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -160,7 +160,7 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci) val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3); __raw_writel(val, phy_ctrl); - return val & USBPHY_CTRL_OTG_ID; + return 0; } /* Base address for this IP block is 0x02184800 */ @@ -193,6 +193,28 @@ static void usb_oc_config(int index) __raw_writel(val, ctrl); } +int usb_phy_mode(int port) +{ + void __iomem *phy_reg; + void __iomem *phy_ctrl; + u32 val; + + phy_reg = (void __iomem *)phy_bases[port]; + phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); + + val = __raw_readl(phy_ctrl); + + if (val & USBPHY_CTRL_OTG_ID) + return USB_INIT_DEVICE; + else + return USB_INIT_HOST; +} + +int __weak board_usb_phy_mode(int port) +{ + return usb_phy_mode(port); +} + int __weak board_ehci_hcd_init(int port) { return 0; @@ -221,7 +243,8 @@ int ehci_hcd_init(int index, enum usb_init_type init, usb_power_config(index); usb_oc_config(index); usb_internal_phy_clock_gate(index, 1); - type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST; + usb_phy_enable(index, ehci); + type = board_usb_phy_mode(index); *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); *hcor = (struct ehci_hcor *)((uint32_t)*hccr + diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 271548c875..e3e7f7686b 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -209,6 +209,20 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif +/* USB Configs */ +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + #define CONFIG_SYS_FSL_USDHC_NUM 3 #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 5e0edabf37..61a7a7a07e 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -198,6 +198,20 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS + +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + #define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index 897018bf84..e9349b5c16 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -280,7 +280,9 @@ struct usb_ehci { #define MXC_EHCI_IPPUE_DOWN (1 << 10) #define MXC_EHCI_IPPUE_UP (1 << 11) +int usb_phy_mode(int port); /* Board-specific initialization */ int board_ehci_hcd_init(int port); +int board_usb_phy_mode(int port); #endif /* _EHCI_FSL_H */ diff --git a/test/ums/ums_gadget_test.sh b/test/ums/ums_gadget_test.sh index 56d4616376..9da486b266 100755 --- a/test/ums/ums_gadget_test.sh +++ b/test/ums/ums_gadget_test.sh @@ -11,6 +11,7 @@ clear COLOUR_RED="\33[31m" COLOUR_GREEN="\33[32m" +COLOUR_ORANGE="\33[33m" COLOUR_DEFAULT="\33[0m" DIR=./ @@ -59,8 +60,15 @@ ums_test_file () { fi cp ./$1 $MNT_DIR - umount $MNT_DIR + while true; do + umount $MNT_DIR > /dev/null 2>&1 + if [ $? -eq 0 ]; then + break + fi + printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n" + sleep 1 + done echo -n "TX: " calculate_md5sum $1 |