summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/arm920t/s3c24x0
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/arm920t/s3c24x0')
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/speed.c30
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/timer.c23
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/usb.c10
-rw-r--r--arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c12
4 files changed, 48 insertions, 27 deletions
diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c b/arch/arm/cpu/arm920t/s3c24x0/speed.c
index b13283a798..3ae558dd62 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/speed.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c
@@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg)
ulong r, m, p, s;
if (pllreg == MPLL)
- r = readl(&clk_power->MPLLCON);
+ r = readl(&clk_power->mpllcon);
else if (pllreg == UPLL)
- r = readl(&clk_power->UPLLCON);
+ r = readl(&clk_power->upllcon);
else
hang();
@@ -64,7 +64,12 @@ static ulong get_PLLCLK(int pllreg)
p = ((r & 0x003F0) >> 4) + 2;
s = r & 0x3;
+#if defined(CONFIG_S3C2440)
+ if (pllreg == MPLL)
+ return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
+#endif
return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
+
}
/* return FCLK frequency */
@@ -77,8 +82,23 @@ ulong get_FCLK(void)
ulong get_HCLK(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
- return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK();
+#ifdef CONFIG_S3C2440
+ switch (readl(&clk_power->clkdivn) & 0x6) {
+ default:
+ case 0:
+ return get_FCLK();
+ case 2:
+ return get_FCLK() / 2;
+ case 4:
+ return (readl(&clk_power->camdivn) & (1 << 9)) ?
+ get_FCLK() / 8 : get_FCLK() / 4;
+ case 6:
+ return (readl(&clk_power->camdivn) & (1 << 8)) ?
+ get_FCLK() / 6 : get_FCLK() / 3;
+ }
+#else
+ return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK();
+#endif
}
/* return PCLK frequency */
@@ -86,7 +106,7 @@ ulong get_PCLK(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK();
+ return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK();
}
/* return UCLK frequency */
diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c
index 7d47354381..8cf9ff6be0 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
@@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void)
{
struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
- return readl(&timers->TCNTO4) & 0xffff;
+ return readl(&timers->tcnto4) & 0xffff;
}
static ulong timestamp;
@@ -56,7 +56,7 @@ int timer_init(void)
/* use PWM Timer 4 because it has no output */
/* prescaler for Timer 4 is 16 */
- writel(0x0f00, &timers->TCFG0);
+ writel(0x0f00, &timers->tcfg0);
if (timer_load_val == 0) {
/*
* for 10 ms clock period @ PCLK with 4 bit divider = 1/2
@@ -68,13 +68,13 @@ int timer_init(void)
}
/* load value for 10 ms timeout */
lastdec = timer_load_val;
- writel(timer_load_val, &timers->TCNTB4);
- /* auto load, manual update of Timer 4 */
- tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000;
- writel(tmr, &timers->TCON);
- /* auto load, start Timer 4 */
+ writel(timer_load_val, &timers->tcntb4);
+ /* auto load, manual update of timer 4 */
+ tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
+ writel(tmr, &timers->tcon);
+ /* auto load, start timer 4 */
tmr = (tmr & ~0x0700000) | 0x0500000;
- writel(tmr, &timers->TCON);
+ writel(tmr, &timers->tcon);
timestamp = 0;
return (0);
@@ -181,6 +181,7 @@ ulong get_tbclk(void)
tbclk = timer_load_val * 100;
#elif defined(CONFIG_SBC2410X) || \
defined(CONFIG_SMDK2410) || \
+ defined(CONFIG_S3C2440) || \
defined(CONFIG_VCMA9)
tbclk = CONFIG_SYS_HZ;
#else
@@ -206,13 +207,13 @@ void reset_cpu(ulong ignored)
watchdog = s3c24x0_get_base_watchdog();
/* Disable watchdog */
- writel(0x0000, &watchdog->WTCON);
+ writel(0x0000, &watchdog->wtcon);
/* Initialize watchdog timer count register */
- writel(0x0001, &watchdog->WTCNT);
+ writel(0x0001, &watchdog->wtcnt);
/* Enable watchdog timer; assert reset at timer timeout */
- writel(0x0021, &watchdog->WTCON);
+ writel(0x0021, &watchdog->wtcon);
while (1)
/* loop forever and wait for reset to happen */;
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c
index e468ed08fc..226a3f6c90 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c
@@ -39,14 +39,14 @@ int usb_cpu_init(void)
* Set the 48 MHz UPLL clocking. Values are taken from
* "PLL value selection guide", 6-23, s3c2400_UM.pdf.
*/
- writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON);
+ writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
/* 1 = use pads related USB for USB host */
- writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR);
+ writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
/*
* Enable USB host clock.
*/
- writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
+ writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
return 0;
}
@@ -55,14 +55,14 @@ int usb_cpu_stop(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
/* may not want to do this */
- writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
+ writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
return 0;
}
int usb_cpu_init_fail(void)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
+ writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
return 0;
}
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
index 5aa8d64a55..ccc97384f3 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void)
* Set the 48 MHz UPLL clocking. Values are taken from
* "PLL value selection guide", 6-23, s3c2400_UM.pdf.
*/
- clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
- gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+ clk_power->upllcon = ((40 << 12) + (1 << 4) + 2);
+ gpio->misccr |= 0x8; /* 1 = use pads related USB for USB host */
/*
* Enable USB host clock.
*/
- clk_power->CLKCON |= (1 << 4);
+ clk_power->clkcon |= (1 << 4);
memset(&gohci, 0, sizeof(struct ohci));
memset(&urb_priv, 0, sizeof(struct urb_priv));
@@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void)
if (hc_reset(&gohci) < 0) {
hc_release_ohci(&gohci);
/* Initialization failed */
- clk_power->CLKCON &= ~(1 << 4);
+ clk_power->clkcon &= ~(1 << 4);
return -1;
}
@@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void)
err("can't start usb-%s", gohci.slot_name);
hc_release_ohci(&gohci);
/* Initialization failed */
- clk_power->CLKCON &= ~(1 << 4);
+ clk_power->clkcon &= ~(1 << 4);
return -1;
}
#ifdef DEBUG
@@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void)
/* call hc_release_ohci() here ? */
hc_reset(&gohci);
/* may not want to do this */
- clk_power->CLKCON &= ~(1 << 4);
+ clk_power->clkcon &= ~(1 << 4);
return 0;
}
generated by cgit (git 2.34.1) at 2024-12-25 06:48:25 +0000