diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 97ef67d8c5..a744e5d499 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -92,6 +92,7 @@ static uint32_t dram_vals[] = { __weak void mxs_adjust_memory_params(uint32_t *dram_vals) { + debug("SPL: Using default SDRAM parameters\n"); } #ifdef CONFIG_MX28 @@ -99,8 +100,10 @@ static void initialize_dram_values(void) { int i; + debug("SPL: Setting mx28 board specific SDRAM parameters\n"); mxs_adjust_memory_params(dram_vals); + debug("SPL: Applying SDRAM parameters\n"); for (i = 0; i < ARRAY_SIZE(dram_vals); i++) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); } @@ -109,6 +112,7 @@ static void initialize_dram_values(void) { int i; + debug("SPL: Setting mx23 board specific SDRAM parameters\n"); mxs_adjust_memory_params(dram_vals); /* @@ -120,6 +124,7 @@ static void initialize_dram_values(void) * HW_DRAM_CTL8 is setup as the last element. * So skip the initialization of these HW_DRAM_CTL registers. */ + debug("SPL: Applying SDRAM parameters\n"); for (i = 0; i < ARRAY_SIZE(dram_vals); i++) { if (i == 8 || i == 27 || i == 28 || i == 35) continue; @@ -146,6 +151,8 @@ static void mxs_mem_init_clock(void) const unsigned char divider = 21; #endif + debug("SPL: Initialising FRAC0\n"); + /* Gate EMI clock */ writeb(CLKCTRL_FRAC_CLKGATE, &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]); @@ -170,6 +177,7 @@ static void mxs_mem_init_clock(void) &clkctrl_regs->hw_clkctrl_clkseq_clr); early_delay(10000); + debug("SPL: FRAC0 Initialised\n"); } static void mxs_mem_setup_cpu_and_hbus(void) @@ -177,6 +185,8 @@ static void mxs_mem_setup_cpu_and_hbus(void) struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + debug("SPL: Setting CPU and HBUS clock frequencies\n"); + /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz * and ungate CPU clock */ writeb(19 & CLKCTRL_FRAC_FRAC_MASK, @@ -209,6 +219,8 @@ static void mxs_mem_setup_vdda(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Configuring VDDA\n"); + writel((0xc << POWER_VDDACTRL_TRG_OFFSET) | (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) | POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW, @@ -240,6 +252,8 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + debug("SPL: Setting mx23 VDDMEM\n"); + /* We must wait before and after disabling the current limiter! */ early_delay(10000); @@ -252,6 +266,8 @@ static void mx23_mem_setup_vddmem(void) static void mx23_mem_init(void) { + debug("SPL: Initialising mx23 SDRAM Controller\n"); + /* * Reset/ungate the EMI block. This is essential, otherwise the system * suffers from memory instability. This thing is mx23 specific and is @@ -297,6 +313,8 @@ static void mx28_mem_init(void) struct mxs_pinctrl_regs *pinctrl_regs = (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE; + debug("SPL: Initialising mx28 SDRAM Controller\n"); + /* Set DDR2 mode */ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2, &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set); |