diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap-common/hwinit-common.c')
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/hwinit-common.c | 201 |
1 files changed, 31 insertions, 170 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 8e765cfe7f..2ab16bfebf 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -1,6 +1,6 @@ /* * - * Common functions for OMAP4 based boards + * Common functions for OMAP4/5 based boards * * (C) Copyright 2010 * Texas Instruments, <www.ti.com> @@ -28,29 +28,12 @@ * MA 02111-1307 USA */ #include <common.h> -#include <asm/armv7.h> -#include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> #include <asm/sizes.h> #include <asm/arch/emif.h> -#include <asm/arch/gpio.h> -#include "../omap4/omap4_mux_data.h" DECLARE_GLOBAL_DATA_PTR; -u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV; - -static const struct gpio_bank gpio_bank_44xx[6] = { - { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX }, -}; - -const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; - #ifdef CONFIG_SPL_BUILD /* * We use static variables because global data is not ready yet. @@ -58,78 +41,17 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; * We would not typically need to save these parameters in regular * U-Boot. This is needed only in SPL at the moment. */ -u32 omap4_boot_device = BOOT_DEVICE_MMC1; -u32 omap4_boot_mode = MMCSD_MODE_FAT; +u32 omap_bootdevice = BOOT_DEVICE_MMC1; +u32 omap_bootmode = MMCSD_MODE_FAT; u32 omap_boot_device(void) { - return omap4_boot_device; + return omap_bootdevice; } u32 omap_boot_mode(void) { - return omap4_boot_mode; -} - -/* - * Some tuning of IOs for optimal power and performance - */ -static void do_io_settings(void) -{ - u32 lpddr2io; - struct control_lpddr2io_regs *lpddr2io_regs = - (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE; - struct omap4_sys_ctrl_regs *const ctrl = - (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE; - - u32 omap4_rev = omap_revision(); - - if (omap4_rev == OMAP4430_ES1_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; - else if (omap4_rev == OMAP4430_ES2_0) - lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; - else - lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; - - /* EMIF1 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3); - - /* EMIF2 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); - /* No pull for GR10 as per hw team's recommendation */ - writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3); - - /* - * Some of these settings (TRIM values) come from eFuse and are - * in turn programmed in the eFuse at manufacturing time after - * calibration of the device. Do the software over-ride only if - * the device is not correctly trimmed - */ - if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) { - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_iva_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_mpu_voltage_ctrl); - - writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_core_voltage_ctrl); - } - - if (!readl(&ctrl->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1); - - if (!readl(&ctrl->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); + return omap_bootmode; } #endif @@ -142,26 +64,9 @@ void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) writew(pad->val, base + pad->offset); } -static void set_muxconf_regs_essential(void) -{ - do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() >= OMAP4460_ES1_0) - do_set_mux(CONTROL_PADCONF_WKUP, - wkup_padconf_array_essential_4460, - sizeof(wkup_padconf_array_essential_4460) / - sizeof(struct pad_conf_entry)); -} - static void set_mux_conf_regs(void) { - switch (omap4_hw_init_context()) { + switch (omap_hw_init_context()) { case OMAP_INIT_CONTEXT_SPL: set_muxconf_regs_essential(); break; @@ -176,7 +81,7 @@ static void set_mux_conf_regs(void) } } -static u32 cortex_a9_rev(void) +u32 cortex_rev(void) { unsigned int rev; @@ -187,65 +92,14 @@ static u32 cortex_a9_rev(void) return rev; } -static void init_omap4_revision(void) +void omap_rev_string(char *omap_rev_string) { - /* - * For some of the ES2/ES1 boards ID_CODE is not reliable: - * Also, ES1 and ES2 have different ARM revisions - * So use ARM revision for identification - */ - unsigned int arm_rev = cortex_a9_rev(); + u32 omap_rev = omap_revision(); + u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; + u32 major_rev = (omap_rev & 0x00000F00) >> 8; + u32 minor_rev = (omap_rev & 0x000000F0) >> 4; - switch (arm_rev) { - case MIDR_CORTEX_A9_R0P1: - *omap4_revision = OMAP4430_ES1_0; - break; - case MIDR_CORTEX_A9_R1P2: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4430_CONTROL_ID_CODE_ES2_0: - *omap4_revision = OMAP4430_ES2_0; - break; - case OMAP4430_CONTROL_ID_CODE_ES2_1: - *omap4_revision = OMAP4430_ES2_1; - break; - case OMAP4430_CONTROL_ID_CODE_ES2_2: - *omap4_revision = OMAP4430_ES2_2; - break; - default: - *omap4_revision = OMAP4430_ES2_0; - break; - } - break; - case MIDR_CORTEX_A9_R1P3: - *omap4_revision = OMAP4430_ES2_3; - break; - case MIDR_CORTEX_A9_R2P10: - switch (readl(CONTROL_ID_CODE)) { - case OMAP4460_CONTROL_ID_CODE_ES1_0: - *omap4_revision = OMAP4460_ES1_0; - break; - case OMAP4460_CONTROL_ID_CODE_ES1_1: - *omap4_revision = OMAP4460_ES1_1; - break; - default: - *omap4_revision = OMAP4460_ES1_0; - break; - } - break; - default: - *omap4_revision = OMAP4430_SILICON_ID_INVALID; - break; - } -} - -void omap_rev_string(char *omap4_rev_string) -{ - u32 omap4_rev = omap_revision(); - u32 omap4_variant = (omap4_rev & 0xFFFF0000) >> 16; - u32 major_rev = (omap4_rev & 0x00000F00) >> 8; - u32 minor_rev = (omap4_rev & 0x000000F0) >> 4; - - sprintf(omap4_rev_string, "OMAP%x ES%x.%x", omap4_variant, major_rev, + sprintf(omap_rev_string, "OMAP%x ES%x.%x", omap_variant, major_rev, minor_rev); } @@ -265,7 +119,7 @@ void omap_rev_string(char *omap4_rev_string) */ void s_init(void) { - init_omap4_revision(); + init_omap_revision(); watchdog_init(); set_mux_conf_regs(); #ifdef CONFIG_SPL_BUILD @@ -312,7 +166,7 @@ void watchdog_init(void) * This is needed because the size of memory installed may be * different on different versions of the board */ -u32 omap4_sdram_size(void) +u32 omap_sdram_size(void) { u32 section, i, total_size = 0, size, addr; for (i = 0; i < 4; i++) { @@ -339,8 +193,7 @@ u32 omap4_sdram_size(void) int dram_init(void) { sdram_init(); - gd->ram_size = omap4_sdram_size(); - + gd->ram_size = omap_sdram_size(); return 0; } @@ -363,18 +216,26 @@ int arch_cpu_init(void) return 0; } -#ifndef CONFIG_SYS_L2CACHE_OFF -void v7_outer_cache_enable(void) +/* + * get_device_type(): tell if GP/HS/EMU/TST + */ +u32 get_device_type(void) { - set_pl310_ctrl_reg(1); + return 0; } -void v7_outer_cache_disable(void) +/* + * Print CPU information + */ +int print_cpuinfo(void) { - set_pl310_ctrl_reg(0); -} -#endif + char rev_string_buffer[50]; + + omap_rev_string(rev_string_buffer); + printf("CPU : %s\n", rev_string_buffer); + return 0; +} #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { |