1 files changed, 0 insertions, 93 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c
deleted file mode 100644
index 2c2d1bce36..0000000000
--- a/arch/arm/cpu/armv7/omap-common/sata.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * TI SATA platform driver
- *
- * (C) Copyright 2013
- * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#include <common.h>
-#include <ahci.h>
-#include <scsi.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sata.h>
-#include <sata.h>
-#include <asm/io.h>
-#include "pipe3-phy.h"
-
-static struct pipe3_dpll_map dpll_map_sata[] = {
-	{12000000, {1000, 7, 4, 6, 0} },        /* 12 MHz */
-	{16800000, {714, 7, 4, 6, 0} },         /* 16.8 MHz */
-	{19200000, {625, 7, 4, 6, 0} },         /* 19.2 MHz */
-	{20000000, {600, 7, 4, 6, 0} },         /* 20 MHz */
-	{26000000, {461, 7, 4, 6, 0} },         /* 26 MHz */
-	{38400000, {312, 7, 4, 6, 0} },         /* 38.4 MHz */
-	{ },                                    /* Terminator */
-};
-
-struct omap_pipe3 sata_phy = {
-	.pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE,
-	/* .power_reg is updated at runtime */
-	.dpll_map = dpll_map_sata,
-};
-
-int init_sata(int dev)
-{
-	int ret;
-	u32 val;
-
-	u32 const clk_domains_sata[] = {
-		0
-	};
-
-	u32 const clk_modules_hw_auto_sata[] = {
-		(*prcm)->cm_l3init_ocp2scp3_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_sata[] = {
-		(*prcm)->cm_l3init_sata_clkctrl,
-		0
-	};
-
-	do_enable_clocks(clk_domains_sata,
-			 clk_modules_hw_auto_sata,
-			 clk_modules_explicit_en_sata,
-			 0);
-
-	/* Enable optional functional clock for SATA */
-	setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
-		     SATA_CLKCTRL_OPTFCLKEN_MASK);
-
-	sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
-
-	/* Power up the PHY */
-	phy_pipe3_power_on(&sata_phy);
-
-	/* Enable SATA module, No Idle, No Standby */
-	val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
-	writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG);
-
-	ret = ahci_init((void __iomem *)DWC_AHSATA_BASE);
-
-	return ret;
-}
-
-int reset_sata(int dev)
-{
-	return 0;
-}
-
-/* On OMAP platforms SATA provides the SCSI subsystem */
-void scsi_init(void)
-{
-	init_sata(0);
-	scsi_scan(1);
-}
-
-void scsi_bus_reset(void)
-{
-	ahci_reset((void __iomem *)DWC_AHSATA_BASE);
-	ahci_init((void __iomem *)DWC_AHSATA_BASE);
-}