diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap3/emif4.c')
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/emif4.c | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c deleted file mode 100644 index a2aadc9816..0000000000 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Author : - * Vaibhav Hiremath <hvaibhav@ti.com> - * - * Based on mem.c and sdrc.c - * - * Copyright (C) 2010 - * Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/emif4.h> - -DECLARE_GLOBAL_DATA_PTR; -extern omap3_sysinfo sysinfo; - -static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE; - -/* - * is_mem_sdr - - * - Return 1 if mem type in use is SDR - */ -u32 is_mem_sdr(void) -{ - return 0; -} - -/* - * get_sdr_cs_size - - * - Get size of chip select 0/1 - */ -u32 get_sdr_cs_size(u32 cs) -{ - u32 size = 0; - - /* TODO: Calculate the size based on EMIF4 configuration */ - if (cs == CS0) - size = CONFIG_SYS_CS0_SIZE; - - return size; -} - -/* - * get_sdr_cs_offset - - * - Get offset of cs from cs0 start - */ -u32 get_sdr_cs_offset(u32 cs) -{ - u32 offset = 0; - - return offset; -} - -/* - * do_emif4_init - - * - Init the emif4 module for DDR access - * - Early init routines, called from flash or SRAM. - */ -static void do_emif4_init(void) -{ - unsigned int regval; - /* Set the DDR PHY parameters in PHY ctrl registers */ - regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS | - EMIF4_DDR1_EXT_STRB_DIS); - writel(regval, &emif4_base->ddr_phyctrl1); - writel(regval, &emif4_base->ddr_phyctrl1_shdw); - writel(0, &emif4_base->ddr_phyctrl2); - - /* Reset the DDR PHY and wait till completed */ - regval = readl(&emif4_base->sdram_iodft_tlgc); - regval |= (1<<10); - writel(regval, &emif4_base->sdram_iodft_tlgc); - /*Wait till that bit clears*/ - while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1); - /*Re-verify the DDR PHY status*/ - while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0); - - regval |= (1<<0); - writel(regval, &emif4_base->sdram_iodft_tlgc); - /* Set SDR timing registers */ - regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD | - EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS | - EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD | - EMIF4_TIM1_T_RP); - writel(regval, &emif4_base->sdram_time1); - writel(regval, &emif4_base->sdram_time1_shdw); - - regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP | - EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR | - EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP); - writel(regval, &emif4_base->sdram_time2); - writel(regval, &emif4_base->sdram_time2_shdw); - - regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC); - writel(regval, &emif4_base->sdram_time3); - writel(regval, &emif4_base->sdram_time3_shdw); - - /* Set the PWR control register */ - regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE | - EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE); - writel(regval, &emif4_base->sdram_pwr_mgmt); - writel(regval, &emif4_base->sdram_pwr_mgmt_shdw); - - /* Set the DDR refresh rate control register */ - regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS); - writel(regval, &emif4_base->sdram_refresh_ctrl); - writel(regval, &emif4_base->sdram_refresh_ctrl_shdw); - - /* set the SDRAM configuration register */ - regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK | - EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE | - EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD | - EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL | - EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM | - EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP); - writel(regval, &emif4_base->sdram_config); -} - -/* - * dram_init - - * - Sets uboots idea of sdram size - */ -int dram_init(void) -{ - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) - size1 = get_sdr_cs_size(CS1); - - gd->ram_size = size0 + size1; - return 0; -} - -void dram_init_banksize (void) -{ - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; -} - -/* - * mem_init() - - * - Initialize memory subsystem - */ -void mem_init(void) -{ - do_emif4_init(); -} |