diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap5')
-rw-r--r-- | arch/arm/cpu/armv7/omap5/hw_data.c | 4 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap5/hwinit.c | 102 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap5/prcm-regs.c | 74 |
3 files changed, 124 insertions, 56 deletions
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 13e618d342..320d5bba68 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -39,6 +39,8 @@ struct dplls const **dplls_data = (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; struct vcores_data const **omap_vcores = (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL; static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ @@ -433,4 +435,6 @@ void hw_data_init(void) default: printf("\n INVALID OMAP REVISION "); } + + *ctrl = &omap5_ctrl; } diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 4def422df1..1863c69c54 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -56,76 +56,71 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_0)); + (*ctrl)->control_ddrch1_0); writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_1)); + (*ctrl)->control_ddrch1_1); writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_0)); + (*ctrl)->control_ddrch2_0); writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_1)); + (*ctrl)->control_ddrch2_1); writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_0)); + (*ctrl)->control_lpddr2ch1_0); writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_1)); + (*ctrl)->control_lpddr2ch1_1); writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - &(ioregs_base->control_ddrio_0)); + (*ctrl)->control_ddrio_0); writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - &(ioregs_base->control_ddrio_1)); + (*ctrl)->control_ddrio_1); writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, - &(ioregs_base->control_ddrio_2)); + (*ctrl)->control_ddrio_2); } /* DDR3 specific IO settings */ static void io_settings_ddr3(void) { u32 io_settings = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch1_0)); + (*ctrl)->control_ddr3ch1_0); writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_0)); + (*ctrl)->control_ddrch1_0); writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_1)); + (*ctrl)->control_ddrch1_1); writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch2_0)); + (*ctrl)->control_ddr3ch2_0); writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_0)); + (*ctrl)->control_ddrch2_0); writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_1)); + (*ctrl)->control_ddrch2_1); writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_0)); + (*ctrl)->control_ddrio_0); writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_1)); + (*ctrl)->control_ddrio_1); writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_2)); + (*ctrl)->control_ddrio_2); /* omap5432 does not use lpddr2 */ - writel(0x0, &(ioregs_base->control_lpddr2ch1_0)); - writel(0x0, &(ioregs_base->control_lpddr2ch1_1)); + writel(0x0, (*ctrl)->control_lpddr2ch1_0); + writel(0x0, (*ctrl)->control_lpddr2ch1_1); writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); + (*ctrl)->control_emif1_sdram_config_ext); writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + (*ctrl)->control_emif2_sdram_config_ext); /* Disable DLL select */ - io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif1_sdram_config)); + (*ctrl)->control_port_emif1_sdram_config); - io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif2_sdram_config)); + (*ctrl)->control_port_emif2_sdram_config); } /* @@ -134,62 +129,60 @@ static void io_settings_ddr3(void) void do_io_settings(void) { u32 io_settings = 0, mask = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; /* Impedance settings EMMC, C2C 1,2, hsi2 */ mask = (ds_mask << 2) | (ds_mask << 8) | (ds_mask << 16) | (ds_mask << 18); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_0) & (~mask); io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) | (ds_45_ohm << 18) | (ds_60_ohm << 2); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_0); /* Impedance settings Mcspi2 */ mask = (ds_mask << 30); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 30); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_1); /* Impedance settings C2C 3,4 */ mask = (ds_mask << 14) | (ds_mask << 16); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_2) & (~mask); io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_2); /* Slew rate settings EMMC, C2C 1,2 */ mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_0) & (~mask); io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_0); /* Slew rate settings hsi2, Mcspi2 */ mask = (sc_mask << 24) | (sc_mask << 28); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_1) & (~mask); io_settings |= (sc_fast << 28) | (sc_fast << 24); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_1); /* Slew rate settings C2C 3,4 */ mask = (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_2) & (~mask); io_settings |= (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_2); /* impedance and slew rate settings for usb */ mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) | (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14); - io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart3io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) | (ds_60_ohm << 23) | (sc_fast << 20) | (sc_fast << 17) | (sc_fast << 14); - writel(io_settings, &(ioregs_base->control_smart3io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart3io_padconf_1); if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) io_settings_lpddr2(); @@ -197,25 +190,22 @@ void do_io_settings(void) io_settings_ddr3(); /* Efuse settings */ - writel(EFUSE_1, &(ioregs_base->control_efuse_1)); - writel(EFUSE_2, &(ioregs_base->control_efuse_2)); - writel(EFUSE_3, &(ioregs_base->control_efuse_3)); - writel(EFUSE_4, &(ioregs_base->control_efuse_4)); + writel(EFUSE_1, (*ctrl)->control_efuse_1); + writel(EFUSE_2, (*ctrl)->control_efuse_2); + writel(EFUSE_3, (*ctrl)->control_efuse_3); + writel(EFUSE_4, (*ctrl)->control_efuse_4); } #endif void config_data_eye_leveling_samples(u32 emif_base) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/ if (emif_base == EMIF1_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); + (*ctrl)->control_emif1_sdram_config_ext); else if (emif_base == EMIF2_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + (*ctrl)->control_emif2_sdram_config_ext); } void init_omap_revision(void) diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index cdc4864919..0f58b2f1a7 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -304,3 +304,77 @@ struct prcm_regs const omap5_es1_prcm = { .prm_sldo_mm_setup = 0x4ae07bd4, .prm_sldo_mm_ctrl = 0x4ae07bd8, }; + +struct omap_sys_ctrl_regs const omap5_ctrl = { + .control_status = 0x4A002134, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, + .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, + .control_padconf_mode = 0x4AE0CDA8, + .control_xtal_oscillator = 0x4AE0CDAC, + .control_i2c_2 = 0x4AE0CDB0, + .control_ckobuffer = 0x4AE0CDB4, + .control_wkup_control_spare_rw = 0x4AE0CDB8, + .control_wkup_control_spare_r = 0x4AE0CDBC, + .control_wkup_control_spare_r_c0 = 0x4AE0CDC0, + .control_srcomp_east_side_wkup = 0x4AE0CDC4, + .control_efuse_1 = 0x4AE0CDC8, + .control_efuse_2 = 0x4AE0CDCC, + .control_efuse_3 = 0x4AE0CDD0, + .control_efuse_4 = 0x4AE0CDD4, + .control_efuse_5 = 0x4AE0CDD8, + .control_efuse_6 = 0x4AE0CDDC, + .control_efuse_7 = 0x4AE0CDE0, + .control_efuse_8 = 0x4AE0CDE4, + .control_efuse_9 = 0x4AE0CDE8, + .control_efuse_10 = 0x4AE0CDEC, + .control_efuse_11 = 0x4AE0CDF0, + .control_efuse_12 = 0x4AE0CDF4, + .control_efuse_13 = 0x4AE0CDF8, +}; |