diff options
Diffstat (limited to 'arch/arm/cpu/armv7/tegra2')
| -rw-r--r-- | arch/arm/cpu/armv7/tegra2/ap20.c | 28 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/tegra2/board.c | 18 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/tegra2/clock.c | 4 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/tegra2/config.mk | 7 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/tegra2/funcmux.c | 30 |
5 files changed, 78 insertions, 9 deletions
diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/armv7/tegra2/ap20.c index 698bfd0e17..1aad3879ee 100644 --- a/arch/arm/cpu/armv7/tegra2/ap20.c +++ b/arch/arm/cpu/armv7/tegra2/ap20.c @@ -77,8 +77,10 @@ static int ap20_cpu_is_cortexa9(void) void init_pllx(void) { - struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU]; + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll_simple *pll = + &clkrst->crc_pll_simple[CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE]; u32 reg; /* If PLLX is already enabled, just return */ @@ -312,9 +314,28 @@ void enable_scu(void) writel(reg, &scu->scu_ctrl); } +static u32 get_odmdata(void) +{ + /* + * ODMDATA is stored in the BCT in IRAM by the BootROM. + * The BCT start and size are stored in the BIT in IRAM. + * Read the data @ bct_start + (bct_size - 12). This works + * on T20 and T30 BCTs, which are locked down. If this changes + * in new chips (T114, etc.), we can revisit this algorithm. + */ + + u32 bct_start, odmdata; + + bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR); + odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); + + return odmdata; +} + void init_pmc_scratch(void) { struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + u32 odmdata; int i; /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ @@ -322,7 +343,8 @@ void init_pmc_scratch(void) writel(0, &pmc->pmc_scratch1+i); /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ - writel(CONFIG_SYS_BOARD_ODMDATA, &pmc->pmc_scratch20); + odmdata = get_odmdata(); + writel(odmdata, &pmc->pmc_scratch20); #ifdef CONFIG_TEGRA2_LP0 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ diff --git a/arch/arm/cpu/armv7/tegra2/board.c b/arch/arm/cpu/armv7/tegra2/board.c index a50b1b988a..923678d063 100644 --- a/arch/arm/cpu/armv7/tegra2/board.c +++ b/arch/arm/cpu/armv7/tegra2/board.c @@ -101,6 +101,22 @@ int arch_cpu_init(void) } #endif +static int uart_configs[] = { +#if defined(CONFIG_TEGRA2_UARTA_UAA_UAB) + FUNCMUX_UART1_UAA_UAB, +#elif defined(CONFIG_TEGRA2_UARTA_GPU) + FUNCMUX_UART1_GPU, +#elif defined(CONFIG_TEGRA2_UARTA_SDIO1) + FUNCMUX_UART1_SDIO1, +#else + FUNCMUX_UART1_IRRX_IRTX, +#endif + FUNCMUX_UART2_IRDA, + -1, + FUNCMUX_UART4_GMC, + -1, +}; + /** * Set up the specified uarts * @@ -120,7 +136,7 @@ static void setup_uarts(int uart_ids) if (uart_ids & (1 << i)) { enum periph_id id = id_for_uart[i]; - funcmux_select(id, FUNCMUX_DEFAULT); + funcmux_select(id, uart_configs[i]); clock_ll_start_uart(id); } } diff --git a/arch/arm/cpu/armv7/tegra2/clock.c b/arch/arm/cpu/armv7/tegra2/clock.c index ccad351639..602589cde0 100644 --- a/arch/arm/cpu/armv7/tegra2/clock.c +++ b/arch/arm/cpu/armv7/tegra2/clock.c @@ -426,7 +426,7 @@ static struct clk_pll *get_pll(enum clock_id clkid) struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - assert(clock_id_isvalid(clkid)); + assert(clock_id_is_pll(clkid)); return &clkrst->crc_pll[clkid]; } @@ -439,7 +439,7 @@ int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn, assert(clkid != CLOCK_ID_USB); /* Safety check, adds to code size but is small */ - if (!clock_id_isvalid(clkid) || clkid == CLOCK_ID_USB) + if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB) return -1; data = readl(&pll->pll_base); *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT; diff --git a/arch/arm/cpu/armv7/tegra2/config.mk b/arch/arm/cpu/armv7/tegra2/config.mk index fe9ef5b763..4dd8cb8442 100644 --- a/arch/arm/cpu/armv7/tegra2/config.mk +++ b/arch/arm/cpu/armv7/tegra2/config.mk @@ -24,10 +24,13 @@ # MA 02111-1307 USA # -# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build this -# file with compatible flags +# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build these +# files with compatible flags ifdef CONFIG_TEGRA2 CFLAGS_arch/arm/lib/board.o += -march=armv4t +CFLAGS_arch/arm/lib/memset.o += -march=armv4t +CFLAGS_lib/string.o += -march=armv4t +CFLAGS_common/cmd_nvedit.o += -march=armv4t endif USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c b/arch/arm/cpu/armv7/tegra2/funcmux.c index 0ef7753021..820ba4e902 100644 --- a/arch/arm/cpu/armv7/tegra2/funcmux.c +++ b/arch/arm/cpu/armv7/tegra2/funcmux.c @@ -31,11 +31,32 @@ int funcmux_select(enum periph_id id, int config) switch (id) { case PERIPH_ID_UART1: - if (config == FUNCMUX_UART1_IRRX_IRTX) { + switch (config) { + case FUNCMUX_UART1_IRRX_IRTX: pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA); pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA); pinmux_tristate_disable(PINGRP_IRRX); pinmux_tristate_disable(PINGRP_IRTX); + break; + case FUNCMUX_UART1_UAA_UAB: + pinmux_set_func(PINGRP_UAA, PMUX_FUNC_UARTA); + pinmux_set_func(PINGRP_UAB, PMUX_FUNC_UARTA); + pinmux_tristate_disable(PINGRP_UAA); + pinmux_tristate_disable(PINGRP_UAB); + bad_config = 0; + break; + case FUNCMUX_UART1_GPU: + pinmux_set_func(PINGRP_GPU, PMUX_FUNC_UARTA); + pinmux_tristate_disable(PINGRP_GPU); + bad_config = 0; + break; + case FUNCMUX_UART1_SDIO1: + pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_UARTA); + pinmux_tristate_disable(PINGRP_SDIO1); + bad_config = 0; + break; + } + if (!bad_config) { /* * Tegra appears to boot with function UARTA pre- * selected on mux group SDB. If two mux groups are @@ -106,6 +127,13 @@ int funcmux_select(enum periph_id id, int config) } break; + case PERIPH_ID_SDMMC1: + if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) { + pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_SDIO1); + pinmux_tristate_disable(PINGRP_SDIO1); + } + break; + case PERIPH_ID_SDMMC2: if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) { pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2); |