diff options
Diffstat (limited to 'arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c')
-rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c | 189 |
1 files changed, 0 insertions, 189 deletions
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c deleted file mode 100644 index b83582fee7..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sc-regs.h> -#include <asm/arch/sg-regs.h> - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT (DPLLCTRL.bit[29:20]) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~0x000f0000; -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unknown frequency" -#endif - -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~SC_DPLLCTRL_SSC_RATE; -#else - tmp |= SC_DPLLCTRL_SSC_RATE; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void upll_init(void) -{ - u32 tmp, clk_mode_upll, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK; - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */ - tmp = readl(SC_UPLLCTRL); - tmp &= ~0x18000000; - writel(tmp, SC_UPLLCTRL); - - if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) { - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x0228f5c0; - } else { - /* AXO: default 24.576MHz */ - tmp &= ~0x07ffffff; - tmp |= 0x02328000; - } - } - - writel(tmp, SC_UPLLCTRL); - - /* set 1 to K_LD(UPLLCTRL.bit[27]) */ - tmp |= 0x08000000; - writel(tmp, SC_UPLLCTRL); - - /* wait 10 usec */ - udelay(10); - - /* set 1 to SNRT(UPLLCTRL.bit[28]) */ - tmp |= 0x10000000; - writel(tmp, SC_UPLLCTRL); -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - - /* set 1 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Set 0 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Set 0x20 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) { - /* AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066664; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* AXO: default 24.576MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* Set 1 to VPLA_K_LD and VPLB_K_LD */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* wait 10 usec */ - udelay(10); - - /* Set 0 to VPLA_SNRST and VPLB_SNRST */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* set 0 to VPLA27WP and VPLA27WP */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - upll_init(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 10 usec in upll_init() and vpll_init() - * so 20 usec can be saved here. - */ - udelay(480); -} |