diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-lsch3/README')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/README | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index cc47466112..37f07fbb76 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -8,3 +8,141 @@ Freescale LayerScape with Chassis Generation 3 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3, for example LS2085A. + +Flash Layout +============ + +(1) A typical layout of various images (including Linux and other firmware images) + is shown below considering a 32MB NOR flash device present on most + pre-silicon platforms (simulator and emulator): + + ------------------------- + | FIT Image | + | (linux + DTB + RFS) | + ------------------------- ----> 0x0120_0000 + | Debug Server FW | + ------------------------- ----> 0x00C0_0000 + | AIOP FW | + ------------------------- ----> 0x0070_0000 + | MC FW | + ------------------------- ----> 0x006C_0000 + | MC DPL Blob | + ------------------------- ----> 0x0020_0000 + | BootLoader + Env| + ------------------------- ----> 0x0000_1000 + | PBI | + ------------------------- ----> 0x0000_0080 + | RCW | + ------------------------- ----> 0x0000_0000 + + 32-MB NOR flash layout for pre-silicon platforms (simulator and emulator) + +(2) A typical layout of various images (including Linux and other firmware images) + is shown below considering a 128MB NOR flash device present on QDS and RDB + boards: + ----------------------------------------- ----> 0x5_8800_0000 --- + | .. Unused .. (7M) | | + ----------------------------------------- ----> 0x5_8790_0000 | + | FIT Image (linux + DTB + RFS) (40M) | | + ----------------------------------------- ----> 0x5_8510_0000 | + | PHY firmware (2M) | | + ----------------------------------------- ----> 0x5_84F0_0000 | 64K + | Debug Server FW (2M) | | Alt + ----------------------------------------- ----> 0x5_84D0_0000 | Bank + | AIOP FW (4M) | | + ----------------------------------------- ----> 0x5_8490_0000 (vbank4) + | MC DPC Blob (1M) | | + ----------------------------------------- ----> 0x5_8480_0000 | + | MC DPL Blob (1M) | | + ----------------------------------------- ----> 0x5_8470_0000 | + | MC FW (4M) | | + ----------------------------------------- ----> 0x5_8430_0000 | + | BootLoader Environment (1M) | | + ----------------------------------------- ----> 0x5_8420_0000 | + | BootLoader (1M) | | + ----------------------------------------- ----> 0x5_8410_0000 | + | RCW and PBI (1M) | | + ----------------------------------------- ----> 0x5_8400_0000 --- + | .. Unused .. (7M) | | + ----------------------------------------- ----> 0x5_8390_0000 | + | FIT Image (linux + DTB + RFS) (40M) | | + ----------------------------------------- ----> 0x5_8110_0000 | + | PHY firmware (2M) | | + ----------------------------------------- ----> 0x5_80F0_0000 | 64K + | Debug Server FW (2M) | | Bank + ----------------------------------------- ----> 0x5_80D0_0000 | + | AIOP FW (4M) | | + ----------------------------------------- ----> 0x5_8090_0000 (vbank0) + | MC DPC Blob (1M) | | + ----------------------------------------- ----> 0x5_8080_0000 | + | MC DPL Blob (1M) | | + ----------------------------------------- ----> 0x5_8070_0000 | + | MC FW (4M) | | + ----------------------------------------- ----> 0x5_8030_0000 | + | BootLoader Environment (1M) | | + ----------------------------------------- ----> 0x5_8020_0000 | + | BootLoader (1M) | | + ----------------------------------------- ----> 0x5_8010_0000 | + | RCW and PBI (1M) | | + ----------------------------------------- ----> 0x5_8000_0000 --- + + 128-MB NOR flash layout for QDS and RDB boards + +Environment Variables +===================== +mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined + the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. + +mcmemsize: MC DRAM block size. If this variable is not defined, the value + CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. + +Booting from NAND +------------------- +Booting from NAND requires two images, RCW and u-boot-with-spl.bin. +The difference between NAND boot RCW image and NOR boot image is the PBI +command sequence. Below is one example for PBI commands for QDS which uses +NAND device with 2KB/page, block size 128KB. + +1) CCSR 4-byte write to 0x00e00404, data=0x00000000 +2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 +The above two commands set bootloc register to 0x00000000_1800a000 where +the u-boot code will be running in OCRAM. + +3) Block Copy: SRC=0x0107, SRC_ADDR=0x00020000, DEST_ADDR=0x1800a000, +BLOCK_SIZE=0x00014000 +This command copies u-boot image from NAND device into OCRAM. The values need +to adjust accordingly. + +SRC should match the cfg_rcw_src, the reset config pins. It depends + on the NAND device. See reference manual for cfg_rcw_src. +SRC_ADDR is the offset of u-boot-with-spl.bin image in NAND device. In + the example above, 128KB. For easy maintenance, we put it at + the beginning of next block from RCW. +DEST_ADDR is fixed at 0x1800a000, matching bootloc set above. +BLOCK_SIZE is the size to be copied by PBI. + +RCW image should be written to the beginning of NAND device. Example of using +u-boot command + +nand write <rcw image in memory> 0 <size of rcw image> + +To form the NAND image, build u-boot with NAND config, for example, +ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin. +The u-boot image should be written to match SRC_ADDR, in above example 0x20000. + +nand write <u-boot image in memory> 200000 <size of u-boot image> + +With these two images in NAND device, the board can boot from NAND. + +Another example for RDB boards, + +1) CCSR 4-byte write to 0x00e00404, data=0x00000000 +2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 +3) Block Copy: SRC=0x0119, SRC_ADDR=0x00080000, DEST_ADDR=0x1800a000, +BLOCK_SIZE=0x00014000 + +nand write <rcw image in memory> 0 <size of rcw image> +nand write <u-boot image in memory> 80000 <size of u-boot image> + +Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image +to match board NAND device with 4KB/page, block size 512KB. |